Application of coefficient diagram method for rotational inverted pendulum control

In this paper, a design of the augmented state feedback controller by using the concept of coefficient diagram method (CDM) for a servo type of the rotational inverted pendulum system is presented. An integrator is augmented to the system due to the responses exhibiting steady-state error. In order to apply the CDM method, the augmented system must be firstly linearized and converted into controllable canonical form by a transform matrix. Then a feedback gain matrix in sense of CDM can be obtained. One can observe that the design procedure of the proposed controller is easy compared to other methods. The experimental results are shown in order to verify the effectiveness of the controller.

[1]  S. Manabe.  Coefficient Diagram Method , 1998 .

[2]  Lahcen Saydy,et al.  Real time control of an inverted pendulum based on approximate linearization , 1996, Proceedings of 1996 Canadian Conference on Electrical and Computer Engineering.

[3]  B. Codrons,et al.  Iterative feedback tuning of a nonlinear controller for an inverted pendulum with a flexible transmission , 1998, Proceedings of the 1998 IEEE International Conference on Control Applications (Cat. No.98CH36104).

[4]  S. Manabe.  Importance of coefficient diagram in polynomial method , 2003, 42nd IEEE International Conference on Decision and Control (IEEE Cat. No.03CH37475).

[5]  S. Kawamoto,et al.  Nonlinear control based on equilibrium point analysis for inverted pendulum , 2002, Proceedings of the 41st SICE Annual Conference. SICE 2002..

[6]  Noriyuki Komine,et al.  Experimental Study of Rotational Inverted Pendulum , 2000 .

[7]  Toshiharu Sugie,et al.  Control of inverted pendulum systems based on approximate linearization: design and experiment , 1994, Proceedings of 1994 33rd IEEE Conference on Decision and Control.

[8]  Juris Vagners,et al.  An alternative inverted pendulum apparatus for education , 1995, Proceedings of 1995 American Control Conference - ACC'95.