Vibration feature evolution of locomotive with tooth root crack propagation of gear transmission system

Abstract As the prompt development of modern railway transportation towards high-speed and high load-capacity, the high-power locomotive is urgently required. Under this situation, the wheel–rail dynamic interaction is becoming more and more intensified which will deteriorate the vibration condition of the key elements of locomotive, such as the gear transmissions. Once gear failures are present, such as gear tooth crack or breakage, it is likely to threaten the operation safety of the locomotive. Thus, deep insight into the fault features of the locomotive gear transmission is urgently necessary for prevention of the induced disastrous consequences. This paper is concentrated on the fault vibration feature extraction of a locomotive in presence of gear tooth root crack under the complicated dynamic excitations from both the gear transmissions and the nonlinear wheel–rail interactions. The locomotive–track coupled dynamics model considering the dynamic effect of the mechanical power transmission path is employed, and the time-varying mesh stiffness of the gear pair with tooth root crack fault and the rail geometric irregularities are then incorporated into the dynamics model to obtain the vibration responses. Then, angular synchronous average technique is proposed to enhance the fault vibration features, and the statistical indicators extracted in frequency domain are developed to reveal the evolution law for the crack propagation scenarios along crack depth or tooth width. The analyzed results indicate that the angular synchronous average technique could effectively reveal the fault vibration feature, and the M8A in the selected statistical indicators is most sensitive to the tooth crack propagation in frequency domain.

[1]  P. Velex,et al.  A model for simulating the quasi-static and dynamic behaviour of solid wide-faced spur and helical gears , 2005 .

[2]  Yaguo Lei,et al.  Condition monitoring and fault diagnosis of planetary gearboxes: A review , 2014 .

[3]  Jens C. O. Nielsen,et al.  VERTICAL DYNAMIC INTERACTION BETWEEN TRAIN AND TRACK INFLUENCE OF WHEEL AND TRACK IMPERFECTIONS , 1995 .

[4]  Wanming Zhai,et al.  Fundamentals of vehicle–track coupled dynamics , 2009 .

[5]  Anand Parey,et al.  A Review of Gear Fault Diagnosis Using Various Condition Indicators , 2016 .

[6]  Omar D. Mohammed,et al.  Improving mesh stiffness calculation of cracked gears for the purpose of vibration-based fault analysis , 2013 .

[7]  Wanming Zhai,et al.  Dynamic investigation of a locomotive with effect of gear transmissions under tractive conditions , 2017 .

[8]  O. Polách.  Creep forces in simulations of traction vehicles running on adhesion limit , 2005 .

[9]  Bangchun Wen,et al.  Meshing characteristics of spur gear pair under different crack types , 2017 .

[10]  Ming J. Zuo,et al.  Analytically evaluating the influence of crack on the mesh stiffness of a planetary gear set , 2014 .

[11]  Simon Iwnicki,et al.  Simulation of wheel–rail contact forces , 2003 .

[12]  Hui Ma,et al.  Fault features analysis of cracked gear considering the effects of the extended tooth contact , 2015 .

[13]  Yimin Shao,et al.  Dynamic modeling for rigid rotor bearing systems with a localized defect considering additional deformations at the sharp edges , 2017 .

[14]  Yimin Shao,et al.  Dynamic simulation of spur gear with tooth root crack propagating along tooth width and crack depth , 2011 .

[15]  Simon Braun,et al.  The synchronous (time domain) average revisited , 2011 .

[16]  Jie Zhang,et al.  Improved analytical methods for calculation of gear tooth fillet-foundation stiffness with tooth root crack , 2017 .

[17]  Klaus Knothe,et al.  Modelling of Railway Track and Vehicle/Track Interaction at High Frequencies , 1993 .

[18]  Yongxiang Zhao,et al.  Nonlinear dynamics analysis of the spur gear system for railway locomotive , 2017 .

[19]  Robert B. Randall,et al.  Differential diagnosis of spall vs. cracks in the gear tooth fillet region: Experimental validation , 2009 .

[20]  Wanming Zhai,et al.  TWO SIMPLE FAST INTEGRATION METHODS FOR LARGE‐SCALE DYNAMIC PROBLEMS IN ENGINEERING , 1996 .

[21]  Kaiyun Wang,et al.  Analytical model for mesh stiffness calculation of spur gear pair with non-uniformly distributed tooth root crack , 2016 .

[22]  Wanming Zhai,et al.  A locomotive–track coupled vertical dynamics model with gear transmissions , 2017 .

[23]  Zaigang Chen,et al.  Mesh stiffness calculation of a spur gear pair with tooth profile modification and tooth root crack , 2013 .

[24]  Shahin Hedayati Kia,et al.  Torsional-Vibration Assessment and Gear-Fault Diagnosis in Railway Traction System , 2011, IEEE Transactions on Industrial Electronics.

[25]  Hui Ma,et al.  Review on dynamics of cracked gear systems , 2015 .

[26]  Piero Baraldi,et al.  Differential evolution-based multi-objective optimization for the definition of a health indicator for fault diagnostics and prognostics , 2018 .

[27]  Fakher Chaari,et al.  Dynamic analysis of a planetary gear failure caused by tooth pitting and cracking , 2006 .

[28]  Zhang Hong-jun,et al.  The dynamic study of locomotives under saturated adhesion , 2011 .

[29]  V K Garg,et al.  Dynamics of railway vehicle systems , 1984 .

[30]  Hui Ma,et al.  Time-varying mesh stiffness calculation of cracked spur gears , 2014 .

[31]  Yaguo Lei,et al.  Phenomenological models of vibration signals for condition monitoring and fault diagnosis of epicyclic gearboxes , 2016 .

[32]  Tetsuji Hirotsu,et al.  Self-Excited Vibration During Slippage of Parallel Cardan Drives for Electric Railcars : Vibration, Control Engineering, Engineering for Industry , 1987 .

[33]  J. J. Kalker,et al.  SOME NEW RESULTS IN ROLLING CONTACT , 1989 .

[34]  Wanming Zhai,et al.  Locomotive dynamic performance under traction/braking conditions considering effect of gear transmissions , 2018 .