A New Importance Measure for Sensitivity Analysis

Uncertainty is an integral part of risk assessment of complex engineering systems, such as nuclear power plants and space crafts. The aim of sensitivity analysis is toidentify the contribution of the uncertainty in model inputs to the uncertainty in the model output. In this study, a new importance measure that characterizes the influence of the entire input distribution on the entire output distribution was proposed. It represents the expected deviation of the cumulative distribution function (CDF) of the model output that would be obtained when one input parameter of interest were known. The applicability of this importance measure was tested with two models, a nonlinear nonmonotonic mathematical model and a risk model. In addition, a comparison of this new importance measure with several other importance measures was carried out and the differences between these measures were explained.

[1]  Mohammad Modarres,et al.  Sensitivity and uncertainty analyses for the accident sequence precursor study , 1985 .

[2]  Jon C. Helton,et al.  Uncertainty and sensitivity analysis techniques for use in performance assessment for radioactive waste disposal , 1993 .

[3]  Ronald L. Iman,et al.  A Matrix-Based Approach to Uncertainty and Sensitivity Analysis for Fault Trees1 , 1987 .

[4]  George Apostolakis.  Uncertainty in probabilistic safety assessment , 1989 .

[5]  Stefano Tarantola,et al.  Sensitivity analysis practices: Strategies for model-based inference , 2006, Reliab. Eng. Syst. Saf..

[6]  Evgueni A. Haroutunian,et al.  Information Theory and Statistics , 2011, International Encyclopedia of Statistical Science.

[7]  Bertrand Iooss,et al.  Response surfaces and sensitivity analyses for an environmental model of dose calculations , 2006, Reliab. Eng. Syst. Saf..

[8]  Peter C. Young,et al.  State Dependent Parameter metamodelling and sensitivity analysis , 2007, Comput. Phys. Commun..

[9]  A. Saltelli,et al.  Making best use of model evaluations to compute sensitivity indices , 2002 .

[10]  Kwang-Il Ahn,et al.  A new approach for measuring uncertainty importance and distributional sensitivity in probabilistic safety assessment , 1994 .

[11]  Toshimitsu Homma,et al.  UNCERTAINTY AND SENSITIVITY STUDIES WITH THE PROBABILISTIC ACCIDENT CONSEQUENCE ASSESSMENT CODE OSCAAR , 2005 .

[12]  T. Ishigami,et al.  An importance quantification technique in uncertainty analysis for computer models , 1990, [1990] Proceedings. First International Symposium on Uncertainty Modeling and Analysis.

[13]  D. M. Rasmuson,et al.  Uncertainties in Nuclear Probabilistic Risk Analyses , 1984 .

[14]  Ronald L. Iman,et al.  Comparison of Maximus/Bounding and Bayes/Monte Carlo for fault tree uncertainty analysis , 1986 .

[15]  Andrea Saltelli,et al.  Use of Sobol's Quasirandom Sequence Generator for Integration of Modified Uncertainty Importance Measure , 1995 .

[16]  S. Kaplan,et al.  On The Quantitative Definition of Risk , 1981 .

[17]  Richard J. Beckman,et al.  A Comparison of Three Methods for Selecting Values of Input Variables in the Analysis of Output From a Computer Code , 2000, Technometrics.

[18]  M. D. McKay,et al.  A comparison of three methods for selecting values of input variables in the analysis of output from a computer code , 2000 .

[19]  P. J. Green,et al.  Density Estimation for Statistics and Data Analysis , 1987 .

[20]  Stefano Tarantola,et al.  Sensitivity Analysis in Practice: A Guide to Assessing Scientific Models , 2004 .

[21]  Andrea Saltelli,et al.  Sensitivity Analysis for Importance Assessment , 2002, Risk analysis : an official publication of the Society for Risk Analysis.

[22]  Jon C. Helton,et al.  A comparison of uncertainty and sensitivity analysis results obtained with random and Latin hypercube sampling , 2005, Reliab. Eng. Syst. Saf..

[23]  Emanuele Borgonovo,et al.  A new uncertainty importance measure , 2007, Reliab. Eng. Syst. Saf..

[24]  R M Cranwell,et al.  Performance assessment of radioactive waste repositories. , 1988, Science.

[25]  Jussi K. Vaurio,et al.  Sensitivity, uncertainty, and importance analysis of a risk assessment , 1992 .

[26]  Jon C. Helton,et al.  Survey of sampling-based methods for uncertainty and sensitivity analysis , 2006, Reliab. Eng. Syst. Saf..

[27]  A. Saltelli,et al.  Reliability Engineering and System Safety , 2008 .

[28]  G. E. Apostolakis,et al.  The interpretation of probability in probabilistic safety assessments , 1988 .

[29]  A. Saltelli,et al.  A quantitative model-independent method for global sensitivity analysis of model output , 1999 .

[30]  Andrew McCulloch,et al.  Sensitivity Analysis in Practice: a Guide to Assessing Scientific Models , 2005 .

[31]  Stefano Tarantola,et al.  Sensitivity Analysis as an Ingredient of Modeling , 2000 .

[32]  Ilya M. Sobol,et al.  Sensitivity Estimates for Nonlinear Mathematical Models , 1993 .

[33]  B. Hicks,et al.  Sensitivity and uncertainty studies of the CRAC2 computer code. , 1987, Risk analysis : an official publication of the Society for Risk Analysis.

[34]  A. Saltelli,et al.  Sensitivity Anaysis as an Ingredient of Modeling , 2000 .

[35]  A. Saltelli,et al.  Importance measures in global sensitivity analysis of nonlinear models , 1996 .