Morphology and mechanical properties of polyketone blended with polyamide and ethylene-octene rubber

[1]  F. Vizza,et al.  Recycling ground tire rubber (GTR) scraps as high-impact filler of in-situ produced polyketone matrix , 2014 .

[2]  Yongjin Li,et al.  High‐performance biosourced poly(lactic acid)/polyamide 11 blends with controlled salami structure , 2014 .

[3]  T. Hasegawa,et al.  Phase separation and mechanical properties of polyketone/polyamide polymer alloys , 2010 .

[4]  T. Hasegawa,et al.  High Impact Properties of Polyketone/Polyamide-6 Alloys Induced by Characteristic Morphology and Water Absorption , 2009 .

[5]  R. J. Gaymans,et al.  Rigid particle toughening of aliphatic polyketone , 2006 .

[6]  Jijun Huang,et al.  Comparison of fracture behavior of nylon 6 versus an amorphous polyamide toughened with maleated poly(ethylene-1-octene) elastomers , 2006 .

[7]  Jijun Huang,et al.  Comparison of the toughening behavior of nylon 6 versus an amorphous polyamide using various maleated elastomers , 2006 .

[8]  R. J. Gaymans,et al.  Influence of sample thickness on fracture behaviour of a polyketone and a polyketone-rubber blend , 2005 .

[9]  R. J. Gaymans,et al.  Influence of copolymerisation on fracture behaviour of aliphatic polyketones , 2005 .

[10]  G. P. Belov,et al.  Polyketones as alternating copolymers of carbon monoxide , 2004 .

[11]  R. J. Gaymans,et al.  Mechanical properties of polyketone terpolymer/rubber blends , 2004 .

[12]  S. Bai,et al.  Microstructures and mechanical properties of polypropylene/polyamide 6/polyethelene-octene elastomer blends , 2004 .

[13]  R. J. Gaymans,et al.  Notch sensitivity of aliphatic polyketone terpolymers , 2004 .

[14]  H. Miller,et al.  Reactive Blending of Polyamides with Different Carbonyl Containing Olefin Polymers , 2003 .

[15]  K. Premphet-Sirisinha,et al.  Study on composition and characteristics of maleated ethylene‐octene copolymer prepared by reactive extrusion on the morphology and properties of polyamide 6/ethylene‐octene copolymer blends , 2003 .

[16]  A. Yee,et al.  Toughening of plastics : advances in modeling and experiments , 2000 .

[17]  S. Wong,et al.  Effect of rubber functionality on microstructures and fracture toughness of impact-modified nylon 6,6/polypropylene blendsPart II. Toughening mechanisms , 2000 .

[18]  K. Gong,et al.  Toughening and strengthening of polypropylene using the rigid-rigid polymer toughening concept Part II Toughening mechanisms investigation , 2000 .

[19]  B. D. Favis,et al.  Diblock copolymers as emulsifying agents in polymer blends: Influence of molecular weight, architecture, and chemical composition , 1996 .

[20]  Y. Mai,et al.  Fracture toughness and fracture mechanisms of polybutylene-terephthalate/polycarbonate/ impact-modifier blends , 1994, Journal of Materials Science.

[21]  H. Sue.  Study of rubber-modified brittle epoxy systems. Part II: Toughening mechanisms under mode-I fracture , 1991 .

[22]  D. S. Parker,et al.  Toughening mechanisms in core-shell rubber modified polycarbonate , 1990 .

[23]  Y. We,et al.  A study on the toughening mechanism of rubber-modified polyfumctional epoxy resins , 1986 .

[24]  Souheng Wu.  Phase structure and adhesion in polymer blends: a criterion for rubber toughening , 1985 .

[25]  Souheng Wu.  Impact fracture mechanisms in polymer blends: Rubber‐toughened nylon , 1983 .

[26]  M. S. Yong,et al.  Impact fracture behaviour of nylon 6-based ternary nanocomposites , 2010 .

[27]  Z. Yu,et al.  On compatibilization and toughening of a copolyester with a maleated thermoplastic elastomer , 2002 .

[28]  F. Garbassi,et al.  Olefin-carbon monoxide copolymers , 1997 .

[29]  Giuseppe Mensitieri,et al.  Gas and water vapour transport in a polyketone terpolymer , 1995 .

[30]  A. Yee,et al.  Study of fracture mechanisms of multiphase polymers using the double-notch four-point-bending method , 1993, Journal of Materials Science.

[31]  D. R. Paul,et al.  Rubber toughening of polyamides with functionalized block copolymers: 1. Nylon-6 , 1992 .