Assessing energy and thermal comfort of domestic buildings in the Mediterranean region

Nowadays, buildings are responsible for the 40% of energy consumption in the European Union, with energy up to 68% being coherent with thermal loads. Acknowledging the great potential of building sector, a substantial amount of the current building inventory must be refurbished, based on the trade-offs between energy and thermal comfort. To this effect, this study investigates the impact of retrofitting measures in residential envelope for areas experience Mediterranean climate. Seven detached houses, located in Cyprus, were modelled, investigating 253 parameters of envelope interventions and also, 7,056 combinations of these measures. In general, the findings revealed a seasonal performance variation of interventions with regards to the outdoor climate. The application of roof insulation determined as the most economic viable solution during retrofitting (single interventions), achieving a reduction up to 25% of annual energy consumption with enhancement of the indoor thermal environment. In the perspective of synergies between interventions, the application of roof and external walls thermal insulation with upgrade of glazing system with double Low-E demonstrated exemplary levels of performance decreasing on average energy consumption up to 38%.The findings of this research will contribute on the development of guidelines for designers and house builders for a perceptual retrofitting of existing residential envelopes in Cyprus and also, for countries experiencing the Mediterranean climate.

[1]  Philip Haves,et al.  USE OF WHOLE BUILDING SIMULATION IN ON-LINE PERFORMANCE ASSESSMENT: MODELING AND IMPLEMENTATION ISSUES , 2001 .

[2]  P. O. Fanger,et al.  Thermal comfort: analysis and applications in environmental engineering, , 1972 .

[3]  Liwei Tian,et al.  Field study on occupants’ thermal comfort and residential thermal environment in a hot-humid climate of China , 2007 .

[4]  Soteris A. Kalogirou,et al.  Environmental benefits of domestic solar energy systems , 2004 .

[5]  W. Chow,et al.  Solar radiation model , 2001 .

[6]  Jorma Railio,et al.  The effect of air temperature on labour productivity in call centres—a case study , 2002 .

[7]  Panayiotis Panayi,et al.  Prioritising energy investments in new dwellings constructed in Cyprus , 2004 .

[8]  Constantinos A. Balaras,et al.  Comparison of methodologies for tmy generation using 20 years data for Athens, Greece , 1999 .

[9]  S. Tassou,et al.  Measures used to lower building energy consumption and their cost effectiveness , 2002 .

[10]  Kamal Skeiker,et al.  Advanced software tool for the creation of a typical meteorological year , 2008 .

[11]  Jan Hensen,et al.  Thermal comfort in residential buildings: Comfort values and scales for building energy simulation , 2009 .

[12]  Wei Pan,et al.  Relationships between air-tightness and its influencing factors of post-2006 new-build dwellings in the UK , 2010 .

[13]  Veronica I. Soebarto.  CALIBRATION OF HOURLY ENERGY SIMULATIONS USING HOURLY MONITORED DATA AND MONTHLY UTILITY RECORDS FOR TWO CASE STUDY BUILDINGS , 1997 .

[14]  David E. Claridge,et al.  Development of an Inverse Method to Estimate Overall Building and Ventilation Parameters of Large Commercial Buildings , 1999 .

[15]  G. R. Newsham.  Manual Control of Window Blinds and Electric Lighting: Implications for Comfort and Energy Consumption , 1994 .

[16]  Peter Atrill,et al.  Accounting and Finance for non-specialists , 2004 .

[17]  Georgios A. Florides,et al.  The characteristics and the energy behaviour of the residential building stock of Cyprus in view of Directive 2002/91/EC , 2010 .

[18]  Jennifer M. Logue,et al.  Energy Impacts of Envelope Tightening and Mechanical Ventilation for the U.S. Residential Sector , 2013 .

[19]  Arild Gustavsen,et al.  State-of-the-Art Highly Insulating Window Frames - Research and Market Review , 2008 .

[20]  C. Zerefos,et al.  Changing Energy Requirements in the Mediterranean Under Changing Climatic Conditions , 2009 .

[21]  K. Jajuga,et al.  Risk Analysis: A Quantitative Guide, 3rd edition by David Vose , 2009 .

[22]  Edmundas Kazimieras Zavadskas,et al.  Multiple criteria assessment of alternatives for built and human environment renovation , 2010 .

[23]  Mahroo Eftekhari,et al.  A Study Of The Effect Of Weighting Indices For The Development Of Tmy Used For Building Simulation , 2013, Building Simulation Conference Proceedings.

[24]  Stephen Selkowitz,et al.  Energy performance analysis of electrochromic windows in New York commercial office buildings , 2002 .

[25]  Sevastianos Mirasgedis,et al.  European residential buildings and empirical assessment of the Hellenic building stock, energy consumption, emissions and potential energy savings , 2007 .

[26]  Don Hedley.  World Energy: The Facts and the Future , 1981 .

[27]  Abdulsalam Ebrahimpour,et al.  A method for generation of typical meteorological year , 2010 .

[28]  Gail Brager,et al.  Comfort standards and variations in exceedance for mixed-mode buildings , 2011 .

[29]  Joseph Andrew Clarke,et al.  Development of adaptive algorithms for the operation of windows, fans, and doors to predict thermal comfort and energy use in Pakistani buildings , 2008 .

[30]  M. H. Hosni,et al.  Experimental results for heat gain and radiant/convective split from equipment in buildings , 1999 .

[31]  Kevin J. Lomas,et al.  Empirical validation of dynamic thermal computer models of buildings , 1985 .

[32]  Serm Janjai,et al.  Comparison of methods for generating typical meteorological year using meteorological data from a tropical environment , 2009 .

[33]  Stewart Robinson,et al.  Simulation: The Practice of Model Development and Use , 2004 .

[34]  Christopher J. Koroneos,et al.  Cyprus energy system and the use of renewable energy sources , 2005 .

[35]  R. J. Dear,et al.  Thermal comfort in the humid tropics: Field experiments in air conditioned and naturally ventilated buildings in Singapore , 1991 .

[36]  K. K. Andersen,et al.  Survey of occupant behaviour and control of indoor environment in Danish dwellings , 2007 .

[37]  Hans Erhorn.  Influence of meteorological conditions on inhabitants' behaviour in dwellings with mechanical ventilation , 1988 .

[38]  Georgios A. Florides,et al.  Evolution of domestic dwellings in Cyprus and energy analysis , 2001 .

[39]  Darren Robinson,et al.  Interactions with window openings by office occupants , 2009 .

[40]  Soteris A. Kalogirou,et al.  Energy analysis of buildings employing thermal mass in Cyprus , 2002 .

[41]  D. K. Pissimanis,et al.  The generation of a “typical meteorological year” for the city of Athens , 1988 .

[42]  Maria Kolokotroni,et al.  Cool roof technology in London: An experimental and modelling study , 2013 .

[43]  B. D. Hunn,et al.  Determination of Retrofit Savings Using a Calibrated Building Energy Simulation Model , 1994 .

[44]  Kim Bjarne Wittchen,et al.  Implementing the Energy Performance of Buildings Directive (EPBD) , 2013 .

[45]  J. Haldane,et al.  The Influence of High Air-Temperatures , 1905, Epidemiology and Infection.

[46]  R. de Dear,et al.  Thermal comfort in practice. , 2004 .

[47]  M. Holmes,et al.  Climate change, thermal comfort and energy: Meeting the design challenges of the 21st century , 2007 .

[48]  J. Orgill,et al.  Correlation equation for hourly diffuse radiation on a horizontal surface , 1976 .

[49]  W. Beckman,et al.  Solar Engineering of Thermal Processes , 1985 .

[50]  J. Owen Lewis,et al.  Energy Conscious Design: A Primer for Architects , 1993 .

[51]  Derek Clements-Croome.  Creating the Productive Workplace , 1999 .

[52]  R. Fritsch,et al.  A stochastic model of user behaviour regarding ventilation , 1990 .

[53]  M. Y. Beshir,et al.  Effects of workplace thermal conditions on safe work behavior , 1983 .

[54]  Naseem M. Sawaqed,et al.  A step‐by‐step application of Sandia method in developing typical meteorological years for different locations in Oman , 2005 .

[55]  J. F. Nicol,et al.  Natural ventilated buildings: Use of controls for changing indoor climate , 1998 .

[56]  G. Florides,et al.  First in situ determination of the thermal performance of a U-pipe borehole heat exchanger, in Cyprus , 2008 .

[57]  Yeonsook Heo,et al.  Calibration of building energy models for retrofit analysis under uncertainty , 2012 .

[58]  Marco Bindi,et al.  Climatic changes and associated impacts in the Mediterranean resulting from a 2°C global warming , 2009 .

[60]  A. Pedrinia,et al.  A methodology for building energy modelling and calibration in warm climates , 2002 .

[61]  Simon Burton.  Handbook of Sustainable Refurbishment: Housing , 2011 .

[62]  K. Steemers,et al.  Time-dependent occupant behaviour models of window control in summer , 2008 .

[63]  Z. Şen.  Solar Energy Fundamentals and Modeling Techniques: Atmosphere, Environment, Climate Change and Renewable Energy , 2008 .

[64]  Mahdavi Ardeshir,et al.  Monitoring-based optimization-assisted calibration of the thermal performance model of an office building , 2012 .

[65]  J. F. Nicol,et al.  Development of an adaptive window-opening algorithm to predict the thermal comfort, energy use and overheating in buildings , 2008 .

[66]  B. Boardman.  Examining the carbon agenda via the 40% House scenario , 2007 .

[67]  Vilfredo Pareto,et al.  Manuale di economia politica : con una introduzione alla scienza sociale , 1906 .

[68]  David E. Claridge,et al.  Procedures for Filling Short Gaps in Energy Use and Weather Data , 2000 .

[69]  Christoph F. Reinhart,et al.  Lightswitch-2002: a model for manual and automated control of electric lighting and blinds , 2004 .