Thermal–hydraulic analysis of wire-wrapped SFR test subassemblies by subchannel analysis method

Abstract Thermal–hydraulic analysis of sodium-cooled fast reactors (SFRs) test subassemblies has been performed employing subchannel analysis method. In order to improve the accuracy of the calculation, recent empirical correlations of pressure drop coefficient and inter-channel mixing for evaluation of coolant flow in wire-wrapped fuel subassemblies have been incorporated into the subchannel analysis model. To confirm the prediction capability of the model, calculations and comparisons with available experimental data of 19- and 37-pin subassemblies have been performed. A comparison with previous results of a 127-pin subassembly has also been performed. The results show that empirical correlations which consider three subchannel types separately are capable of predicting the coolant temperature distribution at bundle outlet best among models. Moreover it has been found that the agreement between calculation result and experimental data of outlet temperature distribution improves when bundle hot dimensions are employed. In addition to the conventional flow resistance models, performance of a method of directly varying coolant flow areas to model geometrical disturbance due to the presence of wire spacers has been evaluated. It has been found that the method is capable of simulating crossflows between adjacent subchannels. All the results show reasonably good agreement with the reference data, in which the root mean square (RMS) differences are within 10% for all cases analyzed in this study.

[1]  P. Chellapandi,et al.  A comparative CFD investigation of helical wire-wrapped 7, 19 and 37 fuel pin bundles and its extendibility to 217 pin bundle , 2009 .

[2]  N. E. Todreas,et al.  SUPERENERGY-2: a multiassembly, steady-state computer code for LMFBR core thermal-hydraulic analysis , 1980 .

[3]  Won-Seok Kim,et al.  A subchannel analysis code MATRA-LMR for wire wrapped LMR subassembly , 2002 .

[4]  Neil E. Todreas,et al.  Distributed resistance modeling of wire-wrapped rod bundles , 1987 .

[5]  Jacopo Buongiorno,et al.  On the use of RELAP5-3D as a subchannel analysis code , 2010 .

[6]  Kwang-Yong Kim,et al.  Effects of wire-spacer shape in LMR on thermal–hydraulic performance , 2008 .

[7]  N. Todreas,et al.  Hydrodynamic models and correlations for bare and wire-wrapped hexagonal rod bundles — Bundle friction factors, subchannel friction factors and mixing parameters , 1986 .

[8]  R. A. Markley,et al.  Laminar, Transition, and Turbulent Parallel Flow Pressure Drop Across Wire-Wrap-Spaced Rod Bundles , 1980 .

[9]  Izumi Kinoshita,et al.  Sodium cooled small fast long-life reactor “4S” , 2005 .

[10]  E. H. Novendstern.  Turbulent flow pressure drop model for fuel rod assemblies utilizing a helical wire-wrap spacer system , 1972 .

[11]  L. F. Parsly,et al.  Temperature distribution in the duct wall and at the exit of a 19-rod simulated LMFBR fuel assembly (FFM bundle 2A) , 1974 .

[12]  Hisashi Ninokata,et al.  The Multi-fluid Multi-phase Subchannel Analysis Code KAMUI for Subassembly Accident Analysis of an LMFR , 2000 .

[13]  M. Kazimi,et al.  Nuclear Systems II: Elements of Thermal Hydraulic Design , 1990 .

[14]  Yong-Bum Lee,et al.  DEVELOPMENT OF THE MATRA-LMR-FB FOR FLOW BLOCKAGE ANALYSIS IN A LMR , 2009 .

[15]  I. K. Madni,et al.  Prediction of decay heat removal capabilities for LMFBRs and comparison with experiments , 1981 .

[16]  J. L. Wantland.  ORRIBLE: a computer program for flow and temperature distribution in 19- rod LMFBR fuel subassemblies , 1974 .

[17]  F. Namekawa,et al.  Buoyancy effects on wire-wrapped rod bundle heat transfer in an LMFBR fuel assembly , 1984 .