Structure and properties of Ti–Al–Y–N coatings deposited from filtered vacuum-arc plasma

[1]  P. Mayrhofer,et al.  Yttrium-induced structural changes in sputtered Ti1−xAlxN thin films , 2007 .

[2]  Lars Hultman,et al.  Microstructural design of hard coatings , 2006 .

[3]  J. Hosson,et al.  Deformation and failure mechanism of nano-composite coatings under nano-indentation , 2006 .

[4]  M. Odén,et al.  Mechanical properties and machining performance of Ti1−xAlxN-coated cutting tools , 2005 .

[5]  D. Mckenzie,et al.  Use of low energy and high frequency PBII during thin film deposition to achieve relief of intrinsic stress and microstructural changes , 2004 .

[6]  E. Richter,et al.  Compressive stress, preferred orientation and film composition in Ti-based coatings developed by plasma immersion ion implantation-assisted deposition , 2004 .

[7]  T. Aizawa,et al.  Effect of aluminum concentration on friction and wear properties of titanium aluminum nitride films , 2004 .

[8]  C. Mitterer,et al.  Self-organized nanostructures in the Ti–Al–N system , 2003 .

[9]  C. Mitterer,et al.  Structure–property relationships in single- and dual-phase nanocrystalline hard coatings , 2003 .

[10]  D. Mckenzie,et al.  Relation between microstructure and stress in titanium nitride films grown by plasma immersion ion implantation , 2003 .

[11]  S. Hwang,et al.  Microstructure and chemical state of Ti1-xYxN film deposited by reactive magnetron sputtering , 2000 .

[12]  A. Matthews,et al.  On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour , 2000 .

[13]  A. Kimura,et al.  Effects of Al content on hardness, lattice parameter and microstructure of Ti1-xAlxN films , 1999 .

[14]  Ivan Petrov,et al.  Microstructure and oxidation-resistance of Ti1 − x − y −zAlxCryYzN layers grown by combined steered-arc/unbalanced-magnetron-sputter deposition , 1997 .

[15]  O. Knotek,et al.  Deposition of arc TiAlN coatings with pulsed bias , 1995 .

[16]  A. Anders,et al.  Metal plasma immersion ion implantation and deposition using vacuum arc plasma sources , 1994 .

[17]  O. Lemmer,et al.  The development of the PVD coating TiAlN as a commercial coating for cutting tools , 1991 .

[18]  W. Münz.  Titanium aluminum nitride films: A new alternative to TiN coatings , 1986 .