Optimum synthesis of motion generating four-bar mechanisms using alternate error functions

Abstract This paper addresses the problem of optimum synthesis of motion generating four-bar mechanisms using evolutionary methods. Formulation of objective functions based on three different error functions is presented, which ensures that the synthesized mechanism is a crank-rocker, and is free from branch and order defects. One of the three error functions is an obvious choice, whereas the other two error functions are newly formulated making use of the basic theory of planar motion of a rigid body and motion generating four-bar mechanisms. The method of differential evolution is used to carry out the optimization for the three objective functions. Results for three problems are presented, all of which fall in the category of motion generation without prescribed timing. Results obtained using the three error functions are compared with regard to accuracy and computational time, on the basis of which conclusions are drawn regarding their relative performance.

[1]  Antonio Moreno Ortiz,et al.  An evolutionary algorithm for path synthesis of mechanisms , 2011 .

[2]  Robert L. Norton,et al.  Design of Machinery , 1991 .

[3]  Xiong Zhang,et al.  Optimal mechanism design using interior-point methods , 2000 .

[4]  Kenneth J. Waldron,et al.  Automatic synthesis of crank driven four-bar mechanisms for two, three, or four-position motion generation , 1997 .

[5]  E. Amezua,et al.  Nonlinear optimization of planar linkages for kinematic syntheses , 1995 .

[6]  L. Romdhane,et al.  A combined genetic algorithm-fuzzy logic method (GA-FL) in mechanisms synthesis , 2004 .

[7]  J. Angeles,et al.  Computation of all optimum dyads in the approximate synthesis of planar linkages for rigid-body guidance , 2000 .

[8]  Li Jiansheng,et al.  Study on rigid-body guidance synthesis of planar linkage ☆ , 2002 .

[9]  Josu Aguirrebeitia,et al.  Optimum synthesis of planar linkages using a strain-energy error function under geometric constraints , 2010 .

[10]  Arthur G. Erdman,et al.  Mixed Exact-Approximate Position Synthesis of Planar Mechanisms , 2000 .

[11]  J. A. Cabrera,et al.  Multiobjective constrained optimal synthesis of planar mechanisms using a new evolutionary algorithm , 2007 .

[12]  Panos S. Shiakolas,et al.  On the Optimum Synthesis of Four-bar Linkages Using Differential Evolution and the Geometric Centroid of Precision Positions , 2002 .

[13]  Wen Yi Lin,et al.  A GA–DE hybrid evolutionary algorithm for path synthesis of four-bar linkage , 2010 .

[14]  Erik D. Goodman,et al.  Simultaneous Type and Dimensional Synthesis of Planar 1DOF Mechanisms Using Evolutionary Search and Convertible Agents , 2009 .

[15]  Sundar Krishnamurty,et al.  A generalized exact gradient method for mechanism synthesis , 1996 .

[16]  F. Peñuñuri,et al.  Synthesis of mechanisms for single and hybrid tasks using differential evolution , 2011 .

[17]  G. R. Gogate,et al.  Optimum synthesis of path generating four-bar mechanisms using differential evolution and a modified error function , 2012 .

[18]  Ramon Sancibrian,et al.  A general procedure based on exact gradient determination in dimensional synthesis of planar mechanisms , 2006 .

[19]  A. Smaili,et al.  Optimum Synthesis of Mechanisms Using Tabu-Gradient Search Algorithm , 2005 .

[20]  Radovan R. Bulatović,et al.  On the optimum synthesis of a four-bar linkage using differential evolution and method of variable controlled deviations , 2009 .

[21]  Peter J. Martin,et al.  On mechanism design optimization for motion generation , 2007 .

[22]  V. Cossalter,et al.  On the use of natural coordinates in optimal synthesis of mechanisms , 2000 .

[23]  Raj S. Sodhi,et al.  On the design of slider-crank mechanisms. Part I: multi-phase motion generation , 2005 .

[24]  Arthur G. Erdman,et al.  An Introduction to Burmester Field Theory , 2000 .

[25]  Gim Song Soh,et al.  The synthesis of six-bar linkages as constrained planar 3R chains , 2008 .

[26]  R. Storn,et al.  Differential Evolution: A Practical Approach to Global Optimization (Natural Computing Series) , 2005 .

[27]  Yahia M. Al-Smadi,et al.  An extension of mechanism design optimization for motion generation , 2009 .

[28]  Ahmad Smaili,et al.  Optimum synthesis of hybrid-task mechanisms using ant-gradient search method , 2007 .

[29]  K. Meer,et al.  Dimensional synthesis of planar Stephenson mechanisms for motion generation using circlepoint search and homotopy methods , 2002 .

[30]  F. Freudenstein.  Advanced mechanism design: Analysis and synthesis: Vol. 2, by G. N. Sandor and A. G. Erdman. Prentice-Hall Inc., Englewood Cliffs, New Jersey, 1984, 688 p , 1985 .

[31]  Ferdinand Freudenstein,et al.  Kinematic Synthesis of Linkages , 1965 .

[32]  Sanjib Kumar Acharyya,et al.  Performance of EAs for four-bar linkage synthesis , 2009 .