Application of mixture experimental design to optimize formulation and performance of thermoplastic road markings

The influence of formulation components on the physical, mechanical and optical properties of hot melt thermoplastic road markings was studied. To minimize the number of experiments, mixture method was used as an effective tool for experimental design. Binder (rosin ester and hydrocarbon based resins), pigment (TiO2), filler (talc) and plasticizer (long oil alkyd resin and dibutyl phthalate) were taken into consideration as the key factors at different levels. A range of formulations were prepared by melt blending of variables and other required components. Softening point temperature (Tsp) and its changes (ΔTsp), Taber abrasion resistance, color difference (ΔE) before and after exposure to the accelerated weathering conditions and heat stability test, were chosen as the key responses. A window of optimum end-use properties of thermoplastic road marking formulations was narrowed down within the range of desired responses in quadratic model using DX v.7.1.3 program. The results showed that the optimized formulations were very close to those from the regression analysis, and the mixture experimental design was an effectual method to optimize the composition of a thermoplastic road marking formulation with respect to its properties. The precision of the model was evaluated by preparing two samples in the optimized window and comparing the predicted and actual properties. The results showed a good agreement between the proposed model and experimental measurements.

[1]  S. Mirabedini,et al.  Weathering performance of the polyurethane nanocomposite coatings containing silane treated TiO2 nanoparticles , 2011 .

[2]  Jerry L Graham,et al.  ROADWAY DELINEATION PRACTICES HANDBOOK , 1994 .

[3]  K. Mclaren XIII—The Development of the CIE 1976 (L* a* b*) Uniform Colour Space and Colour‐difference Formula , 2008 .

[4]  Riccardo Leardi,et al.  Principal component analysis of colour measurements of patinas and coating systems for outdoor bronze monuments , 2009 .

[5]  S. G. Hosseini,et al.  Orthogonal array design method for optimization experiments of sodium azide microencapsulation with stearic acid , 2010 .

[6]  J. S. Hunter,et al.  Statistics for experimenters : an introduction to design, data analysis, and model building , 1979 .

[7]  R. Razavi,et al.  Optimization of wear resistance of PU/TiO2 coatings on aluminum surfaces , 2011 .

[8]  K. Holmberg,et al.  Experimental design and modelling in the investigation of process parameter effects on the tribological and mechanical properties of r.f.-plasma-deposited a-C:H films , 1999 .

[9]  Mark J. Anderson,et al.  DOE Simplified: Practical Tools for Effective Experimentation , 2000 .

[10]  Saeed Bastani,et al.  Optimization of the water-based road-marking paint by experimental design, mixture method , 2006 .

[11]  S. Hajjaji,et al.  Optimization of conversion coatings: study of the influence of parameters with experimental designs , 2000 .

[12]  J. M. Wegner,et al.  Ternary evaluation of UV-curable seed oil inorganic/organic hybrid coatings using experimental design , 2004 .

[13]  T. Kircher,et al.  Use of experimental designs to evaluate formation of aluminide and platinum aluminide coatings , 1998 .

[14]  Loïc Pichavant,et al.  Optimization of a UV-curable acrylate-based protective coating by experimental design , 2008 .

[15]  M. L. González-Rodríguez,et al.  Application of statistical experimental design to study the formulation variables influencing the coating process of lidocaine liposomes. , 2007, International journal of pharmaceutics.

[16]  S. Suib,et al.  Experimental design in the deposition of BN interface coatings on SiC fibers by chemical vapor deposition , 2006 .

[17]  Morteza Ebrahimi,et al.  Using mixture experimental design to study the effect of multifunctional acrylate monomers on UV cured epoxy acrylate resins , 2009 .

[18]  S. Mirabedini,et al.  BLENDING OF HYDROCARBON AND ROSIN ESTER-BASEDRESINS TO STUDY ITS EFFECT ON THE PHYSICAL ANDMECHANICAL PROPERTIES OF THERMOPLASTIC ROAD MARKINGS , 2010 .

[19]  eZivorad R. Laziac Design of experiments in chemical engineering , 2013 .

[20]  Jin-Who Hong,et al.  Determination of key variables affecting surface properties of UV curable coatings using experimental design , 2002 .