Distribution of electrical power to rural areas: Australian experience and implementation possibility in developing countries

The broad development needs of rural areas place numerous demands on the power utility systems. There are a number of different schemes to supply electrical power to rural areas, such as extension of the power grid (network), local diesel generation, renewable energies including photovoltaic, wind energy, and small hydropower plants. Each of these techniques may have different types, each with its specific advantages and disadvantages. For example, extending the power grid may be performed with different distribution system configurations with different levels of complexity, cost and reliability. In this paper, these various options will be discussed. Then, the paper will focus on the technologies used in Australia. Especially, a cost-effective distribution technique, called Single-Wire Earth-Return (SWER) system, will be explained. Its advantages and disadvantages will be discussed. Some issues with regard to the increase in load demands in rural areas related to the SWER systems will be raised, with possible solutions using the emerging technologies. The possibility of implementing this distribution system in some rural areas in Iran will be investigated.

[1]  W. H. Kersting,et al.  Distribution feeder reliability studies , 1997, 1997 Rural Electric Power Conference (Cat. No.97CH36079).

[2]  I.W. Hofsajer,et al.  The use of series injection to eliminate voltage distortion in low and medium voltage networks , 2000, 2000 IEEE Industrial and Commercial Power Systems Technical Conference. Conference Record (Cat. No.00CH37053).

[3]  Nasser Hosseinzadeh,et al.  A proposal to investigate the problems of three-phase distribution feeders supplying power to SWER systems , 2004 .

[4]  T.R. Brooking,et al.  The improved utilisation of existing rural networks with the use of intermediate voltage and single wire earth return systems , 1992, 3D Africon Conference. Africon '92 Proceedings (Cat. No.92CH3215).

[5]  A. Applewhite Africa becomes electric , 2002 .

[6]  Xiaoming Zha,et al.  Unified Power Quality Conditioner (UPQC): the theory, modeling and application , 2000, PowerCon 2000. 2000 International Conference on Power System Technology. Proceedings (Cat. No.00EX409).

[7]  Wei-Jen Lee,et al.  Using a static VAr compensator to balance a distribution system , 1996 .

[8]  C. Hidalgo,et al.  Standard Levels of Energy Losses in Primary Distribution Circuits for SCADA Application , 2002, IEEE Power Engineering Review.

[9]  Jonathan Turner,et al.  Remedial Treatment of Voltage Unbalance on Three-phase Distribution Feeders Caused by Supply to Large SWER Systems , 2003 .

[10]  Beatriz Cancino,et al.  Introducing photovoltaic systems into homes in rural Chile , 2001, IEEE Technology and Society Magazine.

[11]  Peter Wolfs,et al.  Harmonic and Reactive Power Control using a Hybrid Active/Passive Power Conditioner based on a Square Wave Source , 2004 .

[12]  E. L. Owen Rural electrification: the long struggle , 1998 .

[13]  Wei-Jen Lee,et al.  Negative sequence current reduction for generator/turbine protection , 1993, Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting.