An experimental investigation of crack initiation in thin sheets of nitinol

An experimental investigation into the fracture properties of 160-μm-thick edge-cracked specimens of austenitic nickel–titanium (nitinol) under uniaxial tension is presented. Using the in situ optical technique of digital image correlation (DIC), strain fields directly relating to phase boundary nucleation and propagation of fracture samples were observed for the first time. The shape and size of the saturation and transformation zones as a function of loading near the crack tip were examined. An average plane strain crack initiation fracture toughness (K_C) of 51.4 ± 3.6 MPa √m for fine grained polycrystalline nitinol sheets at room temperature was measured. The extent and nature of the phase transformation obtained from DIC, combined with the relatively high value of K_C, underscores the importance of crack tip shielding in the fracture of shape memory alloys.

[1]  M. Jourdan.  Minimally invasive therapy. , 1993, The Ceylon medical journal.

[2]  Ferdinando Auricchio,et al.  Shape-memory alloys: macromodelling and numerical simulations of the superelastic behavior , 1997 .

[3]  C. M. Wayman,et al.  Shape-Memory Materials , 2018 .

[4]  Prediction and observation of crack tip microstructure in shape memory CuAlNi single crystals , 2002 .

[5]  W. Chu,et al.  Characteristics of microcrack initiation in CuNiAl shape memory alloy , 2002 .

[6]  R O Ritchie,et al.  Fatigue-crack propagation in Nitinol, a shape-memory and superelastic endovascular stent material. , 1999, Journal of biomedical materials research.

[7]  K. Bhattacharya.  Microstructure of martensite : why it forms and how it gives rise to the shape-memory effect , 2003 .

[8]  Fractal fracture and transformation toughening in CuNiAl single crystal , 1997 .

[9]  W. Crone,et al.  Nanoindentation and Microindentation of CuAlNi Shape Memory Alloy , 2007 .

[10]  R. O. Ritchie,et al.  Fatigue-crack growth behavior in the superelastic and shape-memory alloy nitinol , 2001 .

[11]  Ferdinando Auricchio,et al.  Shape-memory alloys: modelling and numerical simulations of the finite-strain superelastic behavior , 1997 .

[12]  W. H. Peters,et al.  Application of an optimized digital correlation method to planar deformation analysis , 1986, Image Vis. Comput..

[13]  S. Yi,et al.  Fracture toughening mechanism of shape memory alloys under mixed-mode loading due to martensite transformation , 2001 .

[14]  Yong Liu,et al.  Thermally induced fracture of single crystal Ni-Mn-Ga ferromagnetic shape memory alloy , 2006 .

[15]  Perry H Leo,et al.  Fracture of shape memory CuAlNi single crystals , 2003 .

[16]  A. Pelton,et al.  A guide to shape memory and superelasticity in Nitinol medical devices , 2004, Minimally invasive therapy & allied technologies : MITAT : official journal of the Society for Minimally Invasive Therapy.

[17]  G. Eggeler,et al.  On the formation of martensite in front of cracks in pseudoelastic shape memory alloys , 2005 .

[18]  S. Miyazaki,et al.  Shape memory effect and pseudoelasticity in a TiNi single crystal , 1983 .

[19]  Sung Yi,et al.  Fracture toughening mechanism of shape memory alloys due to martensite transformation , 2000 .

[20]  G. Ravichandran,et al.  Stress-induced martensitic phase transformation in thin sheets of Nitinol , 2007 .

[21]  K. N. Melton,et al.  Fatigue of NITI thermoelastic martensites , 1979 .