Affordable terahertz components using 3D printing

This paper presents the design and characterization of 3D printed photonic crystal filter (quasi optic component) and dielectric ridge waveguide (integrated component). Commercially available 3D printer was used to print polymer based components. Design and characterization of these devices is carried out over a frequency range of 0.15 - 0.5 THz. The photonic crystal filter shows a stop band from 0.25 - 0.35 THz. Also a very narrow defect mode (notch filter) was introduced by altering the structure of photonic crystal. The dielectric ridge waveguide shows broadband THz propagation characteristics. The transmission loss was determined to be largely dominated by the loss characteristics of the polymer material used.

[1]  P. Chahal,et al.  Wafer-level integration of micro-lens for THz focal plane array application , 2013, 2013 IEEE 63rd Electronic Components and Technology Conference.

[2]  Ajay Nahata,et al.  Terahertz plasmonic waveguides created via 3D printing. , 2013, Optics express.

[3]  P. Chahal,et al.  Design and test of wide-band terahertz dielectric sub-wavelength focusing probes , 2011, 2011 IEEE 61st Electronic Components and Technology Conference (ECTC).

[4]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[5]  W.J. Chappell,et al.  Applications of layer-by-layer polymer stereolithography for three-dimensional high-frequency components , 2004, IEEE Transactions on Microwave Theory and Techniques.

[6]  Richard G. Baraniuk,et al.  Gas sensing using terahertz time-domain spectroscopy , 1998 .

[7]  P. Chahal,et al.  On-Wafer Terahertz Ribbon Waveguides Using Polymer–Ceramic Nanocomposites , 2015, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[8]  K. Humphreys,et al.  Medical applications of terahertz imaging: a review of current technology and potential applications in biomedical engineering , 2004, The 26th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[9]  Masayoshi Tonouchi,et al.  Cutting-edge terahertz technology , 2007 .

[10]  P. Kužel,et al.  Highly tunable photonic crystal filter for the terahertz range. , 2005, Optics letters.

[11]  C.L. Arrington,et al.  Design, fabrication, and characterization of metal micromachined rectangular waveguides at 3 THz , 2008, 2008 IEEE Antennas and Propagation Society International Symposium.

[12]  K. Sarabandi,et al.  Design of 3-D Monolithic MMW Antennas Using Ceramic Stereolithography , 2007, IEEE Transactions on Antennas and Propagation.

[13]  Ja-Yu Lu,et al.  Low-loss subwavelength plastic fiber for terahertz waveguiding. , 2005, Optics letters.

[14]  H. Xin,et al.  Rapid and inexpensive fabrication of terahertz electromagnetic bandgap structures. , 2008, Optics express.