Surface modification of sulfonated poly(ether ether ketone) membranes using Nafion solution for direct methanol fuel cells

Abstract Sulfonated poly(ether ether ketone) (SPEEK) membranes were used as support material for Nafion–SPEEK–Nafion (NSN) composite membranes. The NSN composite membrane was prepared by immersing the SPEEK in the Nafion-containing casting solution. The resulting composite membranes were mechanically durable as we selected a suitable degree of sulfonation (DS) of PEEK, and we expect the composite membranes to be of low methanol permeability and high proton conductivity relative to pure SPEEK membranes. The proton conductivity and methanol permeability properties of the composite membrane were measured, and the effect of proton conducting layer was discussed with an empirical equation. It was found that the proton conductivity of the composite membrane exceeded that of the SPEEK membrane under the same condition. The methanol permeability of NSN membrane was higher than that of the same thick SPEEK membrane. The direct methanol fuel cell (DMFC) performance of the NSN membrane was better than that of the SPEEK membrane at 60 °C using 1 M methanol solution.

[1]  Hubert A. Gasteiger,et al.  Handbook of fuel cells : fundamentals technology and applications , 2003 .

[2]  J. Kerres.  Development of ionomer membranes for fuel cells , 2001 .

[3]  A. Manthiram,et al.  Multilayered membranes with suppressed fuel crossover for direct methanol fuel cells , 2004 .

[4]  K. Kreuer.  On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells , 2001 .

[5]  Eugene S. Smotkin,et al.  Methanol crossover in direct methanol fuel cells: a link between power and energy density , 2002 .

[6]  Keith Scott,et al.  Empirical Model Equations for the Direct Methanol Fuel Cell DMFCs , 2002 .

[7]  Suzana P. Nunes,et al.  Inorganic modification of proton conductive polymer membranes for direct methanol fuel cells , 2002 .

[8]  Michael A. Hickner,et al.  Direct polymerization of sulfonated poly(arylene ether sulfone) random (statistical) copolymers: candidates for new proton exchange membranes , 2002 .

[9]  A. Manthiram,et al.  Sulfonated Poly(ether ether ketone) Membranes for Direct Methanol Fuel Cells , 2003 .

[10]  R. Mülhaupt,et al.  Partially sulfonated poly(arylene ether sulfone) : a versatile proton conducting membrane material for modern energy conversion technologies , 1993 .

[11]  Detlef Stolten,et al.  Recent developments of the measurement of the methanol permeation in a direct methanol fuel cell , 2002 .

[12]  Keith Scott,et al.  A semi-empirical model of the direct methanol fuel cell performance. Part I. Model development and verification , 2003 .

[13]  Shimshon Gottesfeld,et al.  Methanol transport through Nafion membranes : Electro-osmotic drag effects on potential step measurements , 2000 .

[14]  G. Robertson,et al.  Synthesis and characterization of sulfonated poly(ether ether ketone) for proton exchange membranes , 2004 .

[15]  Zhaobin Wei,et al.  Influence of electrode structure on the performance of a direct methanol fuel cell , 2002 .

[16]  Michael D. Guiver,et al.  Proton conducting composite membranes from polyether ether ketone and heteropolyacids for fuel cell applications , 2000 .