Cellulosic Insulation Material III. Effects of Heat Flow Geometry on Smolder Initiation

The variation with heat flow geometry of minimum heat source temperature which causes smolder initiation in cellulosic insulation has been examined for eight configurations. These configurations range from a wire-like source, to a flat planar source, to a corner formed by planar sources; they simulate such heat sources as electrical conductors and light fixtures and span the geometry range seen by insulation in practice. The ignition temperature for the same 20 cm deep insulation layer varies from 235°C (corner source) to 385°C (wire source). Other variables such as bulk density or the presence of smolder retardants have much less effect on ignition temperature. This behavior is rationalized in an approximate manner by simple heat generation/ heat flow arguments; it is predicted semi-quantitatively by a numerical model using reaction kinetics derived from thermal analysis. A smolder ignitability test for cellulosic insulations is suggested that simulates exposures to recessed light fixtures. The data here...

[1]  F. Beall,et al.  THERMAL DEGRADATION OF WOOD COMPONENTS: A REVIEW OF THE LITERATURE. , 1970 .

[2]  Daniel Gross.  A preliminary study of the fire safety of thermal insulation for use in attics or enclosed spaces in residential housing , 1978 .

[3]  E. Eckert,et al.  Analysis of heat and mass transfer , 1971 .

[4]  D. W. Yarbrough,et al.  Recessed light fixture test facility , 1979 .

[5]  E. L. Schaffer,et al.  Smoldering initiation in cellulosics under prolonged low-level heating , 1980 .

[6]  A. Merzhanov,et al.  The present state of the thermal ignition theory: An invited review , 1971 .

[7]  J. Ohlemiller.  Smoldering combustion hazards of thermal insulation materials , 1981 .

[8]  Yr Fiorini,et al.  Heat Transmission in Cellulosic Fiber Insulation Materials , 1974 .

[9]  F. E. Rogers,et al.  Cellulosic Insulation Material I. Overall Degradation Kinetics and Reaction Heats , 1980 .

[10]  M. Day,et al.  Technique for Evaluating the Smoulder Resistance of Loose Fiber Fill Cellulose Insulation , 1979 .

[11]  F. E. Rogers,et al.  Cellulosic Insulation Material I. Effect of Additives on Some Smolder Characteristics , 1980 .

[12]  H. A. Luther,et al.  Applied numerical methods , 1969 .

[13]  Lionel A Issen.  Fire Performance of Loose Fill Cellulosic Insulation in Residential Occupancies: A Progress Report. Interim Report. | NIST , 1980 .

[14]  H. Mcdonald,et al.  Combustion modeling in two and three dimensions—Some numerical considerations , 1979 .

[15]  Fred Shafizadeh,et al.  Thermal degradation of cellulose in air and nitrogen at low temperatures , 1979 .

[16]  P. Thomas,et al.  Thermal ignition in a slab with one face at a constant high temperature , 1961 .

[17]  A thermophysical mathematical model of steady-draw smoking and predictions of overall cigarette behavior , 1978 .

[18]  John Howard Perry,et al.  Chemical Engineers' Handbook , 1934 .

[19]  P C Bowes,et al.  Ignition of combustible dusts on hot surfaces , 1962 .

[20]  J. Adler,et al.  Thermal explosion theory , 1964 .

[21]  J. Gillis,et al.  Nonlinear Partial Differential Equations in Engineering , 1967 .