Effect of Cathode Pore Volume on PEM Fuel Cell Cold Start

Effect of Cathode Pore Volume on PEM Fuel Cell Cold Start Ashis Nandy, Fangming Jiang, Shanhai Ge,* Chao-Yang Wang,* and Ken S. Chen Electrochemical Engine Center and Department of Mechanical and Nuclear Engineering, The Pennsylvania State University, University Park, Pennsylvania 16802, USA Nanoscale and Reactive Processes Department, Engineering Sciences Center, Sandia National Laboratories, Albuquerque, New Mexico 87185-0836, USA

[1]  Hubert A. Gasteiger,et al.  Handbook of Fuel Cells , 2010 .

[2]  Chao-Yang Wang,et al.  Current Ramping: A Strategy for Rapid Start-up of PEMFCs from Subfreezing Environment , 2010 .

[3]  Chao-Yang Wang,et al.  Water removal from a PEFC during gas purge , 2008 .

[4]  Hubert A. Gasteiger,et al.  PEM Fuel Cell Operation at − 20 ° C . II. Ice Formation Dynamics, Current Distribution, and Voltage Losses within Electrodes , 2008 .

[5]  Chao-Yang Wang,et al.  Potentiostatic Start-Up of PEMFCs from Subzero Temperatures , 2008 .

[6]  Jing Li,et al.  Ice formation and distribution in the catalyst layer during freeze-start process – CRYO-SEM investigation , 2008 .

[7]  J. Jorné,et al.  PEM Fuel Cell Operation at − 20 ° C . I. Electrode and Membrane Water (Charge) Storage , 2008 .

[8]  Chao-Yang Wang,et al.  Non-isothermal cold start of polymer electrolyte fuel cells , 2007 .

[9]  Shanhai Ge,et al.  Cyclic Voltammetry Study of Ice Formation in the PEFC Catalyst Layer during Cold Start , 2007 .

[10]  Hubert A. Gasteiger,et al.  Oxygen Reduction Reaction Kinetics in Subfreezing PEM Fuel Cells , 2007 .

[11]  Shanhai Ge,et al.  Characteristics of subzero startup and water/ice formation on the catalyst layer in a polymer electrolyte fuel cell , 2007 .

[12]  Chao-Yang Wang,et al.  A Multiphase Model for Cold Start of Polymer Electrolyte Fuel Cells , 2007 .

[13]  Chao-Yang Wang,et al.  Effects of operating and design parameters on PEFC cold start , 2007 .

[14]  Chao-Yang Wang,et al.  Analysis of Cold Start in Polymer Electrolyte Fuel Cells , 2007 .

[15]  Chao-Yang Wang,et al.  Isothermal Cold Start of Polymer Electrolyte Fuel Cells , 2007 .

[16]  Shanhai Ge,et al.  In Situ Imaging of Liquid Water and Ice Formation in an Operating PEFC during Cold Start , 2006 .

[17]  Mario Zedda,et al.  Statistic analysis of operational influences on the cold start behaviour of PEM fuel cells , 2005 .

[18]  Tomohiro Ogawa,et al.  The Design and Performance of a PEFC at a Temperature Below Freezing , 2004 .

[19]  T. Springer,et al.  Polymer Electrolyte Fuel Cell Model , 1991 .

[20]  B. Yi,et al.  Comparative Study of PEM Fuel Cell Storage at − 20 ° C after Gas Purging , 2007 .