Ripple Suppression of On-Chip Switched-Inductor Power Supplies

Emerging applications demand compact, battery-powered, and highly functional microsystems that require on-chip integration, low average power, and high peak-to-average power ratios. Switched inductors are popular power supplies because they are power efficient. Switching a power inductor, however, generates a nonlinear current ripple that is often difficult to tolerate and manage. The problem is more severe with on-chip nH inductors and pF capacitors. This paper explores how switching power supplies can manage and reduce this ripple. Although multiphase and filter suppressors help, analog cancellation can be 38× to 77× more effective, but also less power efficient and 23× to 55× more sensitive to mismatch from drift.

[1]  P. Cantillon-Murphy,et al.  An active ripple filtering technique for improving common-mode inductor performance , 2004, IEEE Power Electronics Letters.

[2]  Mark G. Allen,et al.  A comparison of two micromachined inductors (bar- and meander-type) for fully integrated boost DC/DC , 1996 .

[3]  Martin F. Schlecht,et al.  Active filters for 1 MHz power circuits with strict input/output ripple requirements , 1986, 1986 17th Annual IEEE Power Electronics Specialists Conference.

[4]  Peng Xu,et al.  Performance improvements of interleaving VRMs with coupling inductors , 2001 .

[5]  Fabrice Paillet,et al.  FIVR — Fully integrated voltage regulators on 4th generation Intel® Core™ SoCs , 2014, 2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014.

[6]  R. Harjani,et al.  A High-Efficiency DC–DC Converter Using 2 nH Integrated Inductors , 2008, IEEE Journal of Solid-State Circuits.

[7]  P.L. Chapman,et al.  Design issues for monolithic DC-DC converters , 2005, IEEE Transactions on Power Electronics.

[8]  P. Dahono,et al.  Output ripple analysis of multiphase DC-DC converters , 1999, Proceedings of the IEEE 1999 International Conference on Power Electronics and Drive Systems. PEDS'99 (Cat. No.99TH8475).

[9]  Ningning Wang,et al.  Review of Integrated Magnetics for Power Supply on Chip (PwrSoC) , 2012, IEEE Transactions on Power Electronics.

[10]  (Invited) Integrated Microinductors on Semiconductor Substrates for Power Supply on Chip , 2011 .

[11]  S.C.O. Mathuna,et al.  Magnetics on silicon: an enabling technology for power supply on chip , 2005, IEEE Transactions on Power Electronics.

[12]  Philip T. Krein,et al.  Feed-forward active filter for output ripple cancellation , 1994 .

[13]  A Novel Silicon-Embedded Toroidal Power Inductor With Magnetic Core , 2013, IEEE Electron Device Letters.

[14]  Gabriel A. Rincón-Mora,et al.  A Feedforward $10\times$ CMOS Current-Ripple Suppressor for Switching Power Supplies , 2010, IEEE Transactions on Circuits and Systems II: Express Briefs.

[15]  Avinash Joshi,et al.  A Passive Filter Building Block for Input or Output Current Ripple Cancellation in a Power Converter , 2016, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[16]  T.C. Neugebauer,et al.  Design and evaluation of Feedforward Active ripple filters , 2005, IEEE Transactions on Power Electronics.

[17]  Jung-Ik Ha,et al.  Design technique of coupled inductor filter for suppressing switching ripples in PWM converters , 2015, 2015 6th International Conference on Power Electronics Systems and Applications (PESA).

[18]  Po-Chiun Huang,et al.  An area-efficient CMOS switching converter with on-chip LC filter using feedforward ripple cancellation technique , 2012, Proceedings of Technical Program of 2012 VLSI Design, Automation and Test.

[19]  F. Guinjoan,et al.  Ripple-reduction tuned filtering switching power converter topology , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[20]  Martin F. Schlecht,et al.  Active Filters for 1-MHz Power Circuits with Strct Input/Output Ripple Requirements , 1987, IEEE Transactions on Power Electronics.

[21]  Ralf Wunderlich,et al.  A 1mV voltage ripple 0.97mm2 fully integrated low-power hybrid buck converter , 2013, 2013 Proceedings of the ESSCIRC (ESSCIRC).

[22]  Charles R. Sullivan,et al.  Microfabricated Racetrack Inductors With Thin-Film Magnetic Cores for On-Chip Power Conversion , 2018, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[24]  Rongxiang Wu,et al.  High-Efficiency Silicon-Embedded Coreless Coupled Inductors for Power Supply on Chip Applications , 2012, IEEE Transactions on Power Electronics.

[25]  Yu-Jen Lin,et al.  Passive ripple mirror circuit and its application in pulse-width modulated DC-DC converters , 2015, 2015 IEEE 2nd International Future Energy Electronics Conference (IFEEC).

[26]  M. Allen,et al.  A comparison of micromachined inductors with different magnetic core materials , 1996, 1996 Proceedings 46th Electronic Components and Technology Conference.

[27]  Gabriel Alfonso Rincón-Mora.  Powering Microsystems with Ambient Energy , 2017 .

[28]  P. Ancey,et al.  Low Resistance Integrated Toroidal Inductors for Power Management , 2006, INTERMAG 2006 - IEEE International Magnetics Conference.

[29]  D. C. Hamill,et al.  Analysis and design of an active ripple filter for DC-DC applications , 1995, Proceedings of 1995 IEEE Applied Power Electronics Conference and Exposition - APEC'95.

[30]  Krishna Shenai,et al.  DC-DC power converter for monolithic implementation , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[31]  E. Brandon,et al.  Fabrication and characterization of microinductors for distributed power converters , 2003 .

[32]  Henk Jan Bergveld,et al.  Survey and Benchmark of Fully Integrated Switching Power Converters: Switched-Capacitor Versus Inductive Approach , 2013, IEEE Transactions on Power Electronics.