Effect of temperature on the electric breakdown strength of dielectric elastomer

DE (dielectric elastomer) is one of the most promising artificial muscle materials for its large strain over 100% under driving voltage. However, to date, dielectric elastomer actuators (DEAs) are prone to failure due to the temperature-dependent electric breakdown. Previously studies had shown that the electrical breakdown strength was mainly related to the temperature-dependent elasticity modulus and the permittivity of dielectric substances. This paper investigated the influence of ambient temperature on the electric breakdown strength of DE membranes (VHB4910 3M). The electric breakdown experiment of the DE membrane was conducted at different ambient temperatures and pre-stretch levels. The real breakdown strength was obtained by measuring the deformation and the breakdown voltage simultaneously. Then, we found that with the increase of the environment temperature, the electric breakdown strength decreased obviously. Contrarily, the high pre-stretch level led to the large electric breakdown strength. What is more, we found that the deformations of DEs were strongly dependent on the ambient temperature.

[1]  Edoardo Mazza,et al.  Electromechanical coupling in dielectric elastomer actuators , 2007 .

[2]  Reinhard Schwödiauer,et al.  Stretch dependence of the electrical breakdown strength and dielectric constant of dielectric elastomers , 2013 .

[3]  Zhigang Suo,et al.  Method for measuring energy generation and efficiency of dielectric elastomer generators , 2011 .

[4]  C. Jean-Mistral,et al.  New operating limits for applications with electroactive elastomer: effect of the drift of the dielectric permittivity and the electrical breakdown , 2013, Smart Structures.

[5]  Iain A. Anderson,et al.  Leakage current as a predictor of failure in dielectric elastomer actuators , 2010, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[6]  D. Rossi,et al.  Dielectric elastomers as electromechanical transducers: Fundamentals, Materials, Devices, Models and Applications of an Emerging Electroactive Polymer Technology , 2008 .

[7]  Hualing Chen,et al.  Effect of temperature on the stability of dielectric elastomers , 2011 .

[8]  Ron Pelrine,et al.  Dielectric elastomers: generator mode fundamentals and applications , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[9]  Q. Pei,et al.  Advances in dielectric elastomers for actuators and artificial muscles. , 2010, Macromolecular rapid communications.

[10]  S. Michel,et al.  Stacked dielectric elastomer actuator for tensile force transmission , 2009 .

[11]  Iain A. Anderson,et al.  Self-priming dielectric elastomer generators , 2010 .

[12]  K. Stark,et al.  Electric Strength of Irradiated Polythene , 1955, Nature.

[13]  Hualing Chen,et al.  Temperature dependence of the dielectric constant of acrylic dielectric elastomer , 2012, Applied Physics A.

[14]  Skandar Basrour,et al.  Dielectric properties of polyacrylate thick films used in sensors and actuators , 2010 .

[15]  S. Michel,et al.  A comparison between silicone and acrylic elastomers as dielectric materials in electroactive polymer actuators , 2009 .

[16]  C. Keplinger,et al.  Röntgen’s electrode-free elastomer actuators without electromechanical pull-in instability , 2010, Proceedings of the National Academy of Sciences.

[17]  S. Bauer,et al.  Self-organized minimum-energy structures for dielectric elastomer actuators , 2006 .