Laser patterned PDMS gasket as voids-free underfill material for implantable biomedical microsystems

A pre-cured homogeneous film of silicone rubber (Polydimethyl Siloxane, PDMS) is investigated for application as a gasket-underfill material between flexible polymeric electrodes array and electronics package or interposer for biomedical implants. The gasket is fabricated by structuring a thin sheet of the medical grade MED-1000 silicone with picosecond laser to adapt to the design of interconnections between the electrodes array and the package of implant electronics. The adhesion of the gasket-underfill with the overglazed ceramics (used as test vehicle for package) is evaluated. The application of pre-structured underfill applied prior to electrical bonding ensures voids & bubble-free underfilling and allows for contamination-free interfaces of the mating surfaces. It also eliminates the risk of air or entrapment during underfilling providing which poses a risk for water condensation and short circuiting between contacts. The results of the study show that the gasket with opening size as small as 35 μm with a center-to-center pitch size of 55 μm can be fabricated with the picosecond laser. The gasket-underfill showed sustained adhesion with overglazed ceramics during shear and short term aging tests.

[1]  P. Donaldson,et al.  Twenty years of neurological prosthesis-making. , 1987, Journal of biomedical engineering.

[2]  W. T. Chen,et al.  Materials and mechanics issues in flip-chip organic packaging , 1996, 1996 Proceedings 46th Electronic Components and Technology Conference.

[3]  C. Wong,et al.  Study of the fluxing agent effects on the properties of no-flow underfill materials for flip-chip applications , 1999 .

[4]  Thomas Stieglitz,et al.  “Microflex”—A New Assembling Technique for Interconnects , 2000 .

[5]  Jianhua Wu,et al.  The impact of underfill properties on the thermomechanical reliability of FCOB assembly , 2000 .

[6]  Songhua Shi,et al.  Incorporation of inorganic filler into the no-flow underfill material for flip-chip application , 2000, Proceedings International Symposium on Advanced Packaging Materials Processes, Properties and Interfaces (Cat. No.00TH8507).

[7]  Jianmin Qu,et al.  Study on the correlation of flip-chip reliability with mechanical properties of no-flow underfill materials , 2000, Proceedings International Symposium on Advanced Packaging Materials Processes, Properties and Interfaces (Cat. No.00TH8507).

[8]  Y. Chan,et al.  Electrical Characterization of NCP- and NCF-Bonded Fine-Pitch Flip-Chip-on-Flexible Packages , 2006, IEEE Transactions on Advanced Packaging.

[9]  Thomas Stieglitz,et al.  Manufacturing, assembling and packaging of miniaturized neural implants , 2010 .

[10]  Maurits Ortmanns,et al.  A 232-channel retinal vision prosthesis with a miniaturized hermetic package , 2012, 2012 Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[11]  T. Stieglitz,et al.  Modular assembly of flexible thin-film electrode arrays enabled by a laser-structured ceramic adapter , 2013, 2013 6th International IEEE/EMBS Conference on Neural Engineering (NER).

[12]  Thomas Stieglitz,et al.  Silicone rubber and thin-film polyimide for hybrid neural interfaces — A MEMS-based adhesion promotion technique , 2013, 2013 6th International IEEE/EMBS Conference on Neural Engineering (NER).

[13]  R. Dauskardt,et al.  Moisture-assisted failure mechanisms in underfill epoxy/silicon systems for microelectronic packaging , 2014, IEEE International Interconnect Technology Conference.