Research on vibration characteristics of multistage gears transmission system driven by internal and external excitation

In order to accurately describe the complex transmission systems and clarify the effects of internal and external excitation on the vibration characteristics for large complex transmission systems, a dynamics model considering gear meshing error and time-varying meshing stiffness is established at two-stage planetary gears systems. The coupling model is established by matrix set method for two-stage planetary gears and multistage spur gears transmission systems. The random load excitation verified by experiments is the external excitation in the system, and the excitation caused by the time-varying meshing stiffness and meshing error is the internal excitation. The research on the response of the vibration systems shows that the internal excitation caused by gear meshing stiffness and gear meshing error has important influence on the dynamic load behavior of spur gears transmission in complex systems. For the planetary system with heavy external load, the dynamic behavior mainly depends on the external load, and the influence of internal excitation on the dynamic meshing force is less than that of the external excitation for the planetary system. The external excitation mainly affects the low-frequency region of the dynamic meshing force for the system, and the internal excitation affects the high-frequency region of the dynamic force for the system. The frequency influence interval of the internal excitation is much larger than that of the external excitation.

[1]  Haruo Houjoh,et al.  Research on Multiple-Split Load Sharing Characteristics of 2-Stage External Meshing Star Gear System in Consideration of Displacement Compatibility , 2017 .

[2]  Li Chao-fen.  Vibration of bending-torsion coupling gear-rotor-rolling bearing transmission system , 2014 .

[3]  Huaiju Liu,et al.  Influences of carrier assembly errors on the dynamic characteristics for wind turbine gearbox , 2016 .

[4]  Peng Dong,et al.  Dynamic Analysis of Helical Planetary Gear Sets under Combined Force and Moment Loading , 2017 .

[5]  Ahmet Kahraman,et al.  Planetary gear train dynamics , 1994 .

[6]  Hui Ma,et al.  Time-varying mesh stiffness calculation of cracked spur gears , 2014 .

[7]  Yang Yang,et al.  Influence of controllable parameters on load sharing behavior of torque coupling gear set , 2018 .

[8]  Yang Yang,et al.  Performance Analysis of a Hybrid Power Cutting System for Roadheader , 2017 .

[9]  Rama K. Yedavalli,et al.  Vibration of high speed helical geared shaft systems mounted on rigid bearings , 2018, International Journal of Mechanical Sciences.

[10]  Hui Ma,et al.  Dynamic analysis of three-dimensional helical geared rotor system with geometric eccentricity , 2013 .

[11]  Datong Qin,et al.  A coupling dynamics analysis method for a multistage planetary gear system , 2017 .

[12]  Ru-peng Zhu,et al.  Dynamic load sharing behavior of transverse-torsional coupled planetary gear train with multiple clearances , 2015 .

[13]  Fakher Chaari,et al.  Analytical modelling of spur gear tooth crack and influence on gearmesh stiffness , 2009 .

[14]  Q. Han,et al.  Investigation of Parametric Instability of the Planetary Gear under Speed Fluctuations , 2017 .

[15]  A. Diez-Ibarbia,et al.  Planetary transmission load sharing: Manufacturing errors and system configuration study , 2017 .

[16]  Fakher Chaari,et al.  Effects of variable loading conditions on the dynamic behaviour of planetary gear with power recirculation , 2016 .

[17]  Ji Yeong Lee,et al.  Dynamic analysis for a planetary gear with time-varying pressure angles and contact ratios , 2012 .

[18]  Qinkai Han,et al.  Dynamic analysis of a geared rotor system considering a slant crack on the shaft , 2012 .

[19]  Rama K. Yedavalli,et al.  Dynamics of low speed geared shaft systems mounted on rigid bearings , 2017 .

[20]  Zhang Yi-min.  Vibration response analysis of gear coupled rotor system considering geometric eccentric effect of helical gears , 2013 .

[21]  Datong Qin,et al.  Dynamic characteristics of motor-gear system under load saltations and voltage transients , 2018 .

[22]  Robert G. Parker,et al.  Analytical Characterization of the Unique Properties of Planetary Gear Free Vibration , 1999 .

[23]  P. Borne,et al.  Lyapunov analysis of sliding motions: Application to bounded control , 1996 .

[24]  Wang Qibin.  Modal Coupling Characteristic Analysis of a Helical Gear Rotor System With Parallel Shafts , 2012 .

[25]  Xuefeng Yang,et al.  Nonlinear dynamic analysis and chaos control of multi-freedom semi-direct gear drive system in coal cutters , 2019, Mechanical Systems and Signal Processing.

[26]  Zhansheng Liu,et al.  Nonlinear Dynamic of a Geared Rotor System With Nonlinear Oil Film Force and Nonlinear Mesh Force , 2012 .

[27]  Wennian Yu,et al.  Effects of the gear eccentricities on the dynamic performance of a planetary gear set , 2017 .

[28]  Wenlei Sun,et al.  Dynamic characteristics of a planetary gear system based on contact status of the tooth surface , 2018 .

[29]  Datong Qin,et al.  Investigation of electromechanical coupling vibration characteristics of an electric drive multistage gear system , 2018 .

[30]  T. N. Shiau,et al.  Dynamic analysis of gear-rotor system with viscoelastic supports under residual shaft bow effect , 2011 .

[31]  David Blake Stringer.  Geared rotor dynamic methodologies for advancing prognostic modeling capabilities in rotary-wing transmission systems , 2008 .

[32]  Ge Huai-ting.  Mathematical model of stochastic pick loads for a continuous miner , 2006 .