An object of research is a vibration of the stator of the knife refining machines and its interrelation with the factors which influences the course of refining among them are technical condition of a plate and change of characteristics of the ground material. The diagnostic model of process of refining is developed and positively approved. The new method of determination of degree of wear of the refining plate of refiners is offered. The new method of management of functioning of the knife refining machines is developed. It is shown that management of work on this indirect indicator is not worse, than the management based on the earlier known diagnostic signs of refiners functioning. The developed method of management is indispensible for the refiners with stepwise regulation of a gap, in a disk-conic refiners and in a dual refiners. Realization of this method under production conditions showed stable characteristics of a gain in degree of refining of a semi-finished fibrous product and decrease in specific power consumption during refining. The developed methods can be used in other branches of industry, for example, mining and metallurgy.
[1]
Christer Sandberg,et al.
Low-consistency refining of mechanical pulp in the light of forces on fibres
,
2015
.
[2]
Anders Karlström,et al.
Fiber energy efficiency Part II: Forces acting on the refiner bars
,
2014
.
[3]
G. Daniel,et al.
Fiber- and fine fractions-derived effects on pulp quality as a result of mechanical pulp refining consistency
,
2014,
Wood Science and Technology.
[4]
Mark Martinez,et al.
Understanding of no-load power in low consistency refiners
,
2014
.
[5]
Yu D Alashkevich,et al.
Study of fibrous materials grinding in knife machines taking into account the wear of the headset
,
2018
.
[6]
Oddbjørn Eriksen,et al.
High-frequency pressure measurements in the refining zone of a high-consistency refiner
,
2003
.