Calibration of 0-D combustion model applied to dual-fuel engine

[1]  E. Öztürk,et al.  Effects of EGR, injection retardation and ethanol addition on combustion, performance and emissions of a DI diesel engine fueled with canola biodiesel/diesel fuel blend , 2022, Energy.

[2]  Piyush Singhal,et al.  Analysis of Environmental Emission Neat Diesel-Biodiesel–Algae Oil-Nanometal Additives in Compression Ignition Engines , 2022, Journal of Nanomaterials.

[3]  O. Turan,et al.  Artificial neural networks modeling of combustion parameters for a diesel engine fueled with biodiesel fuel , 2022, Energy.

[4]  Zibin Yin,et al.  Performance enhancement and emission reduction of a diesel engine fueled with different biodiesel-diesel blending fuel based on the multi-parameter optimization theory , 2021, Fuel.

[5]  L. Heber,et al.  Modelling of a thermoelectric generator for heavy-duty natural gas vehicles: Techno-economic approach and experimental investigation , 2020 .

[6]  J. E,et al.  Effects of boiling heat transfer on the performance enhancement of a medium speed diesel engine fueled with diesel and rapeseed methyl ester , 2020 .

[7]  H. Sapra,et al.  Hydrogen-natural gas combustion in a marine lean-burn SI engine: A comparitive analysis of Seiliger and double Wiebe function-based zero–dimensional modelling , 2020 .

[8]  J. E,et al.  Effects of low-level water addition on spray, combustion and emission characteristics of a medium speed diesel engine fueled with biodiesel fuel , 2019, Fuel.

[9]  Li Xu,et al.  Automatic calibration algorithm of 0-D combustion model applied to DICI diesel engine , 2018 .

[10]  M. Yıldız,et al.  Zero-dimensional single zone engine modeling of an SI engine fuelled with methane and methane-hydrogen blend using single and double Wiebe Function: A comparative study , 2017 .

[11]  Ertaç Hürdoğan,et al.  Experimental investigation on performance and emission characteristics of waste tire pyrolysis oil–diesel blends in a diesel engine , 2017 .

[12]  Chuanlei Yang,et al.  Burnt fraction sensitivity analysis and 0-D modelling of common rail diesel engine using Wiebe function , 2017 .

[13]  Guven Gonca,et al.  Theoretical and experimental study on the performance of a diesel engine fueled with diesel–biodiesel blends , 2016 .

[14]  F. Bentahar,et al.  Combustion study of a spark-ignition engine from pressure cycles , 2016 .

[15]  Fadila Maroteaux,et al.  Development and validation of double and single Wiebe function for multi-injection mode Diesel engine combustion modelling for hardware-in-the-loop applications , 2015 .

[16]  Wen Tong Chong,et al.  Engine performance and emissions using Jatropha curcas, Ceiba pentandra and Calophyllum inophyllum biodiesel in a CI diesel engine , 2014 .

[17]  J. Mattson,et al.  Emissions–calibrated equilibrium heat release model for direct injection compression ignition engines , 2014 .

[18]  Junmin Wang,et al.  Control-oriented multi-phase combustion model for biodiesel fueled engines , 2013 .

[19]  Fadila Maroteaux,et al.  Diesel engine combustion modeling for hardware in the loop applications: Effects of ignition delay time model , 2013 .

[20]  Mohand Tazerout,et al.  Single zone combustion modeling of biodiesel from wastes in diesel engine , 2013 .

[21]  P. Soltic,et al.  The polytropic volume method to detect engine events based on the measured cylinder pressure , 2012 .

[22]  Pablo Olmeda,et al.  A complete 0D thermodynamic predictive model for direct injection diesel engines , 2011 .

[23]  Jeffrey Naber,et al.  Estimation of double-Wiebe function parameters using least square method for burn durations of ethanol-gasoline blends in spark ignition engine over variable compression ratios and EGR levels , 2011 .

[24]  Andrea Catania,et al.  Predictive zero-dimensional combustion model for DI diesel engine feed-forward control , 2011 .

[25]  H. Climent,et al.  Correlations for Wiebe function parameters for combustion simulation in two-stroke small engines , 2011 .

[26]  Jamil Ghojel,et al.  Review of the development and applications of the Wiebe function: A tribute to the contribution of Ivan Wiebe to engine research , 2010 .

[27]  Paul J. Shayler,et al.  Burn angles and form factors for Wiebe function fits to mass fraction burned curves of a spark ignition engine with variable valve timing , 2010 .

[28]  M. P. Dorado,et al.  Influence of a Combustion Parametric Model on the Cyclic Angular Speed of Internal Combustion Engines. Part I: Setup for Sensitivity Analysis , 2009 .

[29]  Cem Sorusbay,et al.  Double-Wiebe function: An approach for single-zone HCCI engine modeling , 2008 .

[30]  F. Zanello,et al.  Forcing the strong Lefschetz and the maximal rank properties , 2008, 0804.2877.

[31]  S. Nada,et al.  Effect of Castor Biodiesel on Diesel Engine Performance, Emissions, and Combustion Characteristics , 2019 .

[32]  Claude Valery Ngayihi Abbe,et al.  A study on the 0D phenomenological model for diesel engine simulation: Application to combustion of Neem methyl esther biodiesel , 2015 .

[33]  Pedro Piqueras,et al.  Methodology for characterisation and simulation of turbocharged diesel engines combustion during transient operation. Part 2: Phenomenological combustion simulation , 2009 .