Microwave-assisted extraction for qualitative and quantitative determination of brominated flame retardants in styrenic plastic fractions from waste electrical and electronic equipment (WEEE).

A fast method for the determination of brominated flame retardants (BFRs) in styrenic polymers using microwave-assisted extraction (MAE) and liquid chromatography with UV detection (HPLC-UV) was developed. Different extraction parameters (extraction temperature and time, type of solvent, particle size) were first optimised for standard high-impact polystyrene (HIPS) samples containing known amounts of tetrabromobisphenol A (TBBPA) and decabromodiphenyl ether (Deca-BDE). Complete extraction of TBBPA was achieved using a combination of polar/non-polar solvent system (isopropanol/n-hexane) and high extraction temperatures (130 degrees C). Lower extraction yields were, however, obtained for Deca-BDE, due to its high molecular weight and its non-polar nature. The developed method was successfully applied to the screening of BFRs in standard plastic samples from waste electrical and electronic equipment (WEEE); TBBPA could be fully recovered, and Deca-BDE could be identified, together with minor order polybrominated diphenyl ether (PBDE) congeners.

[1]  V. Lopez-Avila,et al.  Microwave-Assisted Extraction of Organic Compounds from Standard Reference Soils and Sediments , 1994 .

[2]  Robert C Hale,et al.  Brominated flame retardant concentrations and trends in abiotic media. , 2006, Chemosphere.

[3]  H. Budzinski,et al.  Microwave assisted extraction of organic compounds , 1999 .

[4]  Keith D. Bartle,et al.  A simple solvent selection method for accelerated solvent extraction of additives from polymers , 1999 .

[5]  John Crank,et al.  The Mathematics Of Diffusion , 1956 .

[6]  J. Luque‐Garcia,et al.  Where is microwave-based analytical equipment for solid sample pre-treatment going? , 2003 .

[7]  Ǻ. Bergman,et al.  An overview of commercially used brominated flame retardants, their applications, their use patterns in different countries/regions and possible modes of release. , 2003, Environment international.

[8]  D. Barceló,et al.  Sample handling and analysis of brominated flame retardants in soil and sludge samples , 2004 .

[9]  S. Karlsson,et al.  A rapid microwave‐assisted solvent extraction method for assessment of stabilizer concentration in crosslinked polydimethylsiloxane , 2004 .

[10]  Rudi van Eldik,et al.  Identification of brominated flame retardants in polymeric materials by reversed-phase liquid chromatography with ultraviolet detection , 1998 .

[11]  J. Dean,et al.  Extraction of Oligomers From Poly(ethylene terephthalate) by Microwave-assisted Extraction , 1997 .

[12]  M. Marı́n,et al.  Determination of adipate plasticizers in poly(vinyl chloride) by microwave-assisted extraction. , 2002, Journal of chromatography. A.

[13]  Rudi van Eldik,et al.  Rapid identification of RoHS-relevant flame retardants from polymer housings by ultrasonic extraction and RP-HPLC/UV. , 2005, Journal of chromatography. A.

[14]  H. Neels,et al.  Recent developments in the analysis of brominated flame retardants and brominated natural compounds. , 2007, Journal of chromatography. A.

[15]  C. Cramers,et al.  Parameters affecting the accelerated solvent extraction of polymeric samples , 1997 .

[16]  Rudi van Eldik,et al.  Extraction of brominated flame retardants from polymeric waste material using different solvents and supercritical carbon dioxide , 2003 .

[17]  S. Karlsson,et al.  Quality-determination of recycled plastic packaging waste by identification of contaminants by GC–MS after microwave assisted extraction (MAE) , 2000 .

[18]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[19]  C. A. Wit.  An overview of brominated flame retardants in the environment. , 2002 .

[20]  A. Covaci,et al.  Determination of brominated flame retardants, with emphasis on polybrominated diphenyl ethers (PBDEs) in environmental and human samples--a review. , 2003, Environment international.

[21]  Martin Schlummer,et al.  Analysis of flame retardant additives in polymer fractions of waste of electric and electronic equipment (WEEE) by means of HPLC-UV/MS and GPC-HPLC-UV. , 2005, Journal of chromatography. A.

[22]  C. Hansen.  Hansen Solubility Parameters: A User's Handbook , 1999 .

[23]  T. Hyötyläinen,et al.  Determination of brominated flame retardants in environmental samples , 2002 .

[24]  W. Freitag,et al.  Fast separation of stabilizers from polyolefins by microwave heating , 1990 .

[25]  R. Law,et al.  Developments in the use of chromatographic techniques in marine laboratories for the determination of halogenated contaminants and polycyclic aromatic hydrocarbons. , 2003, Journal of chromatography. A.

[26]  B. Marcato,et al.  Microwave-assisted extraction by fast sample preparation for the systematic analysis of additives in polyolefins by high-performance liquid chromatography. , 2000, Journal of chromatography. A.