UGR-FACT test for the study of fatigue cracking in bituminous mixes

Abstract Fatigue cracking in bituminous mixes is one of the most common pathologies that affect roads all over the world. The improvement of the laboratory test methods used in their design is crucial to prolong the service life of pavements. This article describes a test method that simulates the stresses caused by fatigue cracking in pavements. The UGR-FACT Test, based on a device that produces controlled fatigue cracking process, makes possible to analyze the cracking propagation in the different phases (initiation, progression, and failure). The study of the material is performed in a representative volume, controlling horizontal and vertical deformations produced in the immediate proximity of the crack, after the application of each loading cycle. The energy dissipated by the material is analyzed to avoid the problems associated with the three-dimensional dispersion and randomness of fatigue cracking.

[1]  D. Castro-Fresno,et al.  Evaluation of anti-reflective cracking systems using geosynthetics in the interlayer zone , 2011 .

[2]  Reynaldo Roque,et al.  Identification and verification of a suitable crack growth law , 2001 .

[3]  Samuel H Carpenter,et al.  DISSIPATED ENERGY CONCEPTS FOR HMA PERFORMANCE: FATIGUE AND HEALING , 2006 .

[4]  S H Carpenter,et al.  FATIGUE BEHAVIOR UNDER NEW AIRCRAFT LOADING CONDITIONS , 1997 .

[5]  G. Colombier.  Cracking in pavements: nature and origin of cracks , 2004 .

[6]  Nick Thom,et al.  Principles of Pavement Engineering , 2008 .

[7]  F V Hermann.  Aircraft/Pavement Technology in the Midst of Change: Seattle, Washington, August 17-20, 1997 , 1997 .

[8]  Reynaldo Roque,et al.  Evaluation of Laboratory-Measured Crack Growth Rate for Asphalt Mixtures , 2001 .

[9]  Qiang Li,et al.  A simple fatigue performance model of asphalt mixtures based on fracture energy , 2012 .

[10]  Khalid A. Ghuzlan.  Fatigue Damage Analysis in Asphalt Concrete Mixtures Based Upon Dissipated Energy Concepts , 2001 .

[11]  Hai Huang,et al.  A Dissipated Energy Approach to Fatigue Evaluation , 2006 .

[12]  R. Miró,et al.  Application of a strain sweep test to assess fatigue behavior of asphalt binders , 2012 .

[13]  Samuel H Carpenter,et al.  Energy-Derived, Damage-Based Failure Criterion for Fatigue Testing , 2000 .

[14]  A C Pronk,et al.  ENERGY DISSIPATION: THE LEADING FACTOR OF FATIGUE , 1991 .

[15]  Khalid A. Ghuzlan,et al.  Fatigue Endurance Limit for Highway and Airport Pavements , 2003 .

[16]  L. Hui,et al.  Evaluation of fatigue crack behavior in asphalt concrete pavements with different polymer modifiers , 2012 .

[17]  Shihui Shen,et al.  Application of the dissipated energy concept in fatigue endurance limit testing , 2005 .

[18]  Jia-Der Perng,et al.  Analysis of crack propagation in asphalt concrete using a cohesive crack model , 1991 .

[19]  Adriana Martínez,et al.  Approach to fatigue performance using Fénix test for asphalt mixtures , 2012 .