Porous anodic alumina optimized as a catalyst support for microreactors

Abstract This paper describes the optimization of process conditions for making porous anodic alumina as a catalyst support in monolithic microreactors. The basic process involves direct current anodization of 1100 alloy aluminum in oxalic acid. Electrolyte concentration, temperature, and anodization potential are optimized with respect to oxidation efficiency and pore density via a Box–Behnken experimental design to the values of 0.6 M, 18 °C, and 30 V, respectively. The effects of subsequent hydrothermal–thermal treatment on the surface area enhancement and surface morphology of the porous oxide are also investigated and optimized. The resulting films are employed in the fabrication of active catalytic aluminum–alumina microreactors for the decomposition of ammonia to hydrogen and nitrogen.

[1]  G. Patermarakis,et al.  Catalysis over porous anodic alumina catalysts , 1994 .

[2]  G. Patermarakis,et al.  Catalysis over Porous Anodic Alumina Film Catalysts with Different Pore Surface Concentrations , 1999 .

[3]  L. Zhang,et al.  Template synthesis of single-crystal Cu nanowire arrays by electrodeposition , 2001 .

[4]  R. Piner,et al.  An improved method to strip aluminum from porous anodic alumina films , 2003 .

[5]  Gerhard Ertl,et al.  Preparation of Solid Catalysts , 1999 .

[6]  M. Muthukumar,et al.  Optimization of mix proportions of mineral aggregates using Box Behnken design of experiments , 2003 .

[7]  J. Ying,et al.  Processing and Characterization of Single-Crystalline Ultrafine Bismuth Nanowires , 1999 .

[8]  Frank Müller,et al.  Self-Organized Formation of Hexagonal Pore Structures in Anodic Alumina , 1998 .

[9]  G. Patermarakis,et al.  Preparation of ultra-active alumina of designed porous structure by successive hydrothermal and thermal treatments of porous anodic Al2O3 films , 1999 .

[10]  Y. Abdel-Fattah.  Optimization of thermostable lipase production from a thermophilic Geobacillus sp. using Box-Behnken experimental design , 2002, Biotechnology Letters.

[11]  Kenji Fukuda,et al.  Ordered Metal Nanohole Arrays Made by a Two-Step Replication of Honeycomb Structures of Anodic Alumina , 1995, Science.

[12]  G. Patermarakis,et al.  Formulation of a criterion predicting the development of uniform regular and non-uniform abnormal porous anodic alumina coatings and revealing the mechanisms of their appearance and progress , 2001 .

[13]  V. Parkhutik,et al.  Theoretical modelling of porous oxide growth on aluminium , 1992 .

[14]  Edmund G Seebauer,et al.  Porous anodic alumina microreactors for production of hydrogen from ammonia , 2004 .

[15]  Craig A. Grimes,et al.  Titanium oxide nanotube arrays prepared by anodic oxidation , 2001 .

[16]  Hiroki Habazaki,et al.  Mechanical properties of amorphous anodic alumina and tantala films using nanoindentation , 2002 .

[17]  Douglas K. Ludlow,et al.  Teaching Statistical Experimental Design Using a Laboratory Experiment , 1995 .

[18]  C. R. Martin,et al.  Carbon nanotubule membranes for electrochemical energy storage and production , 1998, Nature.

[19]  M. Moskovits,et al.  Fabrication of Nanometer‐Scale Patterns by Ion‐Milling with Porous Anodic Alumina Masks , 2000 .

[20]  Kornelius Nielsch,et al.  Hexagonal pore arrays with a 50-420 nm interpore distance formed by self-organization in anodic alumina , 1998 .

[21]  G. Patermarakis,et al.  Study on the mechanism of oxide hydration and oxide pore closure during hydrothermal treatment of porous anodic Al2O3 films , 1992 .

[22]  K. Shimizu,et al.  Adhesion of Anodic Films on Aluminum-Lithium Alloys , 1999 .

[23]  G. Patermarakis,et al.  The mechanism of growth of porous anodic Al2O3 films on aluminium at high film thicknesses , 1995 .