A zero torsional stiffness twist morphing blade as a wind turbine load alleviation device

This paper presents the design, analysis and realization of a zero stiffness twist morphing wind turbine blade. The morphing blade is designed to actively twist as a means of alleviating the gust loads which reduce the fatigue life of wind turbine blades. The morphing structure exploits an elastic strain energy balance within the blade to enable large twisting deformations with modest actuation requirements. While twist is introduced using the warping of the blade skin, internal pre-stressed members ensure that a constant strain energy balance is achieved throughout the deformation, resulting in a zero torsional stiffness structure. The torsional stability of the morphing blade is characterized by analysing the elastic strain energy in the device. Analytical models of the skin, the pre-stressed components and the complete blade are compared to their respective finite element models as well as experimental results. The load alleviation potential of the adaptive structure is quantified using a two-dimensional steady flow aerodynamic model which is experimentally validated with wind tunnel measurements.

[1]  László P. Kollár,et al.  Mechanics of Composite Structures by László P. Kollár , 2003 .

[2]  Marc R. Schultz,et al.  A Concept for Airfoil-like Active Bistable Twisting Structures , 2008 .

[3]  Paul M. Weaver,et al.  Review of morphing concepts and materials for wind turbine blade applications , 2013 .

[4]  Mac Gaunaa,et al.  Wind tunnel test on wind turbine airfoil with adaptive trailing edge geometry , 2007 .

[5]  I. H. Abbott,et al.  Theory of Wing Sections , 1959 .

[6]  Phil Mellor,et al.  Bistable Composite Flap for an Airfoil , 2010 .

[7]  Mac Gaunaa,et al.  Load alleviation through adaptive trailing edge control surfaces: ADAPWING overview , 2007 .

[8]  David J. Wagg,et al.  Adaptive Structures: Engineering Applications , 2007 .

[9]  G.A.M. van Kuik,et al.  Review of state of the art in smart rotor control research for wind turbines , 2010 .

[10]  Christian Bak,et al.  Wind tunnel test on airfoil Riso-B1-18 with an Active Trailing Edge Flap , 2010 .

[11]  T.H.G. Megson,et al.  Aircraft structures for engineering students , 1972 .

[12]  Paul M. Weaver,et al.  Design and testing of a deformable wind turbine blade control surface , 2012 .

[13]  S. LynchChristopher,et al.  リラクサ強誘電体8/65/35PLZTとオルセンサイクルを用いる焦電廃熱エネルギー回収 | 文献情報 | J-GLOBAL 科学技術総合リンクセンター , 2012 .

[14]  Sergio Pellegrino,et al.  Bistable prestressed shell structures , 2004 .

[15]  Scott J. Johnson,et al.  Active load control techniques for wind turbines. , 2008 .

[16]  Zafer Gürdal,et al.  Mechanism for Warp-Controlled Twist of a Morphing Wing , 2010 .

[17]  C. R. Calladine,et al.  Theory of Shell Structures , 1983 .

[18]  Sergio Pellegrino.  Bistable Shell Structures , 2005 .

[19]  M. Stack,et al.  On erosion issues associated with the leading edge of wind turbine blades , 2013 .

[20]  P. Weaver,et al.  A morphing trailing edge device for a wind turbine , 2012 .

[21]  Sergio Pellegrino,et al.  A Zero-Stiffness Elastic Shell Structure , 2011 .

[22]  Torben J. Larsen,et al.  Active load reduction using individual pitch, based on local blade flow measurements , 2005 .

[23]  Isaac M Daniel,et al.  Engineering Mechanics of Composite Materials , 1994 .

[24]  Mihir Mistry,et al.  Actuation Requirements of a Warp-Induced Variable Twist Rotor Blade , 2011 .

[25]  Stefano Vidoli,et al.  Tristability of thin orthotropic shells with uniform initial curvature , 2008, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[26]  Gijs van Kuik,et al.  Closed-Loop Control Wind Tunnel Tests on an Adaptive Wind Turbine Blade for Load Reduction , 2008 .

[27]  David G. Wilson,et al.  ACTIVE AERODYNAMIC BLADE CONTROL DESIGN FOR LOAD REDUCTION ON LARGE WIND TURBINES , 2009 .

[28]  C. P. van Dam,et al.  Active Aerodynamic Load Control of Wind Turbine Blades. , 2007 .

[29]  Paul M. Weaver,et al.  Multi-stable composite twisting structure for morphing applications , 2012, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[30]  Sergio Pellegrino,et al.  Analytical models for bistable cylindrical shells , 2006, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[31]  Paul M. Weaver,et al.  Twisting structures with tailored stability and their application to morphing wings , 2012 .