A comparative study on a novel combination of spherical and membrane tubular reactors of the catalyt

Abstract Refineries have been looking for ways of improving the performance of the reformer by enhancing the octane number of the product via increasing the aromatics content. To reach this goal, more improved configurations should be investigated. The aromatics production rate could be enhanced by shifting the reactions to the production side by using hydrogen perm–selective membranes. In the present study, we have investigated theoretically the best combination of membrane tubular reactors and spherical radial-flow reactors for the conventional naphtha reforming unit consist of three fixed-bed reactors. Hydrogen permeation through the membrane shifts the reaction to the product side (aromatics and hydrogen) according to the thermodynamic equilibrium. Spherical reactors reduce the pressure drop in the catalytic naphtha reforming units and consequently increase the efficiency. The results show higher aromatics production in the new configurations compared with the membrane tubular and conventional reactors despite using lower membrane surface area.

[1]  Howard F. Rase,et al.  Chemical Reactor Design for Process Plants , 1977 .

[2]  Sushil Adhikari,et al.  Hydrogen Membrane Separation Techniques , 2006 .

[3]  Bernard P. A. Grandjean,et al.  Catalytic palladium‐based membrane reactors: A review , 1991 .

[4]  Lawrence F. Shampine,et al.  The MATLAB ODE Suite , 1997, SIAM J. Sci. Comput..

[5]  Mohammad Reza Rahimpour,et al.  Enhancement of hydrogen production in a novel fluidized-bed membrane reactor for naphtha reforming , 2009 .

[6]  D. Thoenes,et al.  Mass transfer from spheres in various regular packings to a flowing fluid , 1958 .

[7]  K. Kobe,et al.  Chemical engineering kinetics , 1956 .

[8]  Sunggyu Lee,et al.  Encyclopedia of Chemical Processing , 2005 .

[9]  Don W. Green,et al.  Perry's Chemical Engineers' Handbook , 2007 .

[10]  L. Cot,et al.  Fundamentals of inorganic membrane science and technology , 1996 .

[11]  Ke-min Liang,et al.  A study on naphtha catalytic reforming reactor simulation and analysis. , 2005, Journal of Zhejiang University. Science. B.

[12]  H. S. Fogler,et al.  Elements of Chemical Reaction Engineering , 1986 .

[13]  Mohammad Reza Rahimpour,et al.  A Novel Radial‐Flow, Spherical‐Bed Reactor Concept for Methanol Synthesis in the Presence of Catalyst Deactivation , 2008 .

[14]  Mohammad Reza Rahimpour,et al.  A membrane catalytic bed concept for naphtha reforming in the presence of catalyst deactivation , 2009 .

[15]  Abdullah M. Aitani,et al.  Catalytic Naphtha Reforming , 2005 .

[16]  S. Tosti,et al.  Rolled thin Pd and Pd–Ag membranes for hydrogen separation and production , 2000 .

[17]  Mohammad Reza Rahimpour,et al.  A novel dynamic radial-flow, spherical-bed reactor concept for naphtha reforming in the presence of catalyst deactivation , 2010 .

[18]  R. Baker.  Future directions of membrane gas separation technology , 2002 .

[19]  John R. Grace,et al.  Modeling of a novel membrane reactor to integrate dehydrogenation of ethylbenzene to styrene with hydrogenation of nitrobenzene to aniline , 2008 .

[20]  S. Nam,et al.  Hydrogen separation by Pd alloy composite membranes: introduction of diffusion barrier , 2001 .

[21]  Patrick Linke,et al.  Optimization Approach for Continuous Catalytic Regenerative Reformer Processes , 2010 .

[22]  R. Reid,et al.  The Properties of Gases and Liquids , 1977 .

[23]  Mohammad Reza Rahimpour,et al.  Dynamic optimization of a multi-stage spherical, radial flow reactor for the naphtha reforming process in the presence of catalyst deactivation using differential evolution (DE) method , 2010 .

[24]  P. G. Menon,et al.  Hydrogen Effects in Catalysis , 2020 .