Hot melt extruded polysaccharide blends for controlled drug delivery

[1]  R. Rossi,et al.  On-demand drug release from tailored blended electrospun nanofibers , 2019, Journal of Drug Delivery Science and Technology.

[2]  M. Barati,et al.  Polyvinyl alcohol-sodium alginate blend, composited with 3D-graphene oxide as a controlled release system for curcumin , 2019, Journal of Drug Delivery Science and Technology.

[3]  N. Okur,et al.  A novel approach for skin infections: Controlled release topical mats of poly(lactic acid)/poly(ethylene succinate) blends containing Voriconazole , 2018, Journal of Drug Delivery Science and Technology.

[4]  Gareth R. Williams,et al.  Dual‐responsive drug delivery systems prepared by blend electrospinning , 2018, International journal of pharmaceutics.

[5]  T. Kumar,et al.  Tailoring antibiotic release for the treatment of periodontal infrabony defects using bioactive gelatin-alginate/apatite nanocomposite films , 2018 .

[6]  A. Larsson,et al.  New insights on the influence of manufacturing conditions and molecular weight on phase-separated films intended for controlled release. , 2018, International journal of pharmaceutics.

[7]  J. B. Méndez,et al.  Cellulose-polysaccharide film-coating of cyclodextrin based pellets for controlled drug release , 2017 .

[8]  A. Attama,et al.  Optimization of formulation processes using Design Expert® Software for preparation of polymeric blends-artesunate-amodiaquine HCl microparticles , 2017 .

[9]  J. Siepmann,et al.  PLGA implants: How Poloxamer/PEO addition slows down or accelerates polymer degradation and drug release , 2017, Journal of controlled release : official journal of the Controlled Release Society.

[10]  S. Singh,et al.  Role of synbiotics in polysaccharide assisted colon targeted microspheres of mesalamine for the treatment of ulcerative colitis. , 2017, International Journal of Biological Macromolecules.

[11]  R. Bodmeier,et al.  Poly vinyl acetate and ammonio methacrylate copolymer as unconventional polymer blends increase the mechanical robustness of HPMC matrix tablets. , 2017, International journal of pharmaceutics.

[12]  Feng Zhang,et al.  Properties and mechanisms of drug release from matrix tablets containing poly(ethylene oxide) and poly(acrylic acid) as release retardants. , 2016, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[13]  A. Särkkä,et al.  Characterization of pore structure of polymer blended films used for controlled drug release. , 2016, Journal of Controlled Release.

[14]  A. Gazzaniga,et al.  Coated pellets for oral colon delivery , 2015 .

[15]  C. Leopold,et al.  Coatings from blends of Eudragit® RL and L55: a novel approach in pH-controlled drug release. , 2014, International journal of pharmaceutics.

[16]  J. Siepmann,et al.  Ethanol-resistant ethylcellulose/guar gum coatings--importance of formulation parameters. , 2013, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[17]  J. Siepmann,et al.  Mechanisms Controlling Theophylline Release from Ethanol-Resistant Coated Pellets , 2013, Pharmaceutical Research.

[18]  J. Siepmann,et al.  Ethanol-resistant polymeric film coatings for controlled drug delivery. , 2013, Journal of controlled release : official journal of the Controlled Release Society.

[19]  B. S. Khatkar,et al.  X-ray diffraction, IR spectroscopy and thermal characterization of partially hydrolyzed guar gum. , 2012, International journal of biological macromolecules.

[20]  J. Siepmann,et al.  Drug release mechanisms from Kollicoat SR:Eudragit NE coated pellets. , 2011, International journal of pharmaceutics.

[21]  R. Bodmeier,et al.  Improved drug delivery to the lower intestinal tract with tablets compression-coated with enteric/nonenteric polymer powder blends. , 2010, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[22]  D. Craig,et al.  Characterisation of the thermal properties of ethylcellulose using differential scanning and quasi-isothermal calorimetric approaches. , 2010, International journal of pharmaceutics.

[23]  Yaochun Shen,et al.  Effects of film coating thickness and drug layer uniformity on in vitro drug release from sustained-release coated pellets: a case study using terahertz pulsed imaging. , 2009, International journal of pharmaceutics.

[24]  H. Kranz,et al.  Evaluation of the drug release patterns and long term stability of aqueous and organic coated pellets by using blends of enteric and gastrointestinal insoluble polymers. , 2009, International journal of pharmaceutics.

[25]  T. De Beer,et al.  Influence of polyethylene glycol/polyethylene oxide on the release characteristics of sustained-release ethylcellulose mini-matrices produced by hot-melt extrusion: in vitro and in vivo evaluations. , 2009, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[26]  Klaus-Peter Moll,et al.  Modulating pH-independent release from coated pellets: effect of coating composition on solubilization processes and drug release. , 2009, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[27]  S. Nazzal,et al.  Novel use of Eudragit NE 30D/Eudragit L 30D-55 blends as functional coating materials in time-delayed drug release applications. , 2008, International journal of pharmaceutics.

[28]  J. Siepmann,et al.  Polymer blends for controlled release coatings. , 2008, Journal of controlled release : official journal of the Controlled Release Society.

[29]  Jingjun Huang,et al.  Drug-polymer interaction and its significance on the physical stability of nifedipine amorphous dispersion in microparticles of an ammonio methacrylate copolymer and ethylcellulose binary blend. , 2008, Journal of Pharmacy and Science.

[30]  J. Remon,et al.  Correlation between the permeability of metoprolol tartrate through plasticized isolated ethylcellulose/hydroxypropyl methylcellulose films and drug release from reservoir pellets. , 2007, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[31]  P. J. Wilson,et al.  Exploiting gastrointestinal bacteria to target drugs to the colon: an in vitro study using amylose coated tablets. , 2005, International journal of pharmaceutics.

[32]  J. Siepmann,et al.  Blends of aqueous polymer dispersions used for pellet coating: importance of the particle size. , 2005, Journal of controlled release : official journal of the Controlled Release Society.

[33]  Lin Li,et al.  Release of theophylline from polymer blend hydrogels. , 2005, International journal of pharmaceutics.

[34]  S. Al-Saidan,et al.  In vitro and in vivo evaluation of guar gum-based matrix tablets of rofecoxib for colonic drug delivery. , 2005, Current drug delivery.

[35]  Randall V. Sparer,et al.  Adjusting drug diffusivity using miscible polymer blends. , 2005, Journal of controlled release : official journal of the Controlled Release Society.

[36]  R. Liggins,et al.  Paclitaxel-loaded poly(L-lactic acid) microspheres 3: blending low and high molecular weight polymers to control morphology and drug release. , 2004, International journal of pharmaceutics.

[37]  J. Siepmann,et al.  Polymer Blends Used for the Coating of Multiparticulates: Comparison of Aqueous and Organic Coating Techniques , 2004, Pharmaceutical Research.

[38]  J. Newton,et al.  Amylose formulations for drug delivery to the colon: a comparison of two fermentation models to assess colonic targeting performance in vitro. , 2004, International journal of pharmaceutics.

[39]  James W McGinity,et al.  Physicochemical properties and mechanism of drug release from ethyl cellulose matrix tablets prepared by direct compression and hot-melt extrusion. , 2004, International journal of pharmaceutics.

[40]  J. Siepmann,et al.  Blends of enteric and GIT-insoluble polymers used for film coating: physicochemical characterization and drug release patterns. , 2003, Journal of controlled release : official journal of the Controlled Release Society.

[41]  V. Satyanarayana,et al.  In vitro drug release studies on guar gum-based colon targeted oral drug delivery systems of 5-fluorouracil. , 2002, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

[42]  P. Deluca,et al.  Polymer and microsphere blending to alter the release of a peptide from PLGA microspheres. , 2000, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[43]  J. Newton,et al.  The properties of amylose-ethylcellulose films cast from organic-based solvents as potential coatings for colonic drug delivery. , 2000, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

[44]  A. Moes,et al.  Studies of pectin HM/Eudragit RL/Eudragit NE film-coating formulations intended for colonic drug delivery. , 2000, International journal of pharmaceutics.

[45]  J. Siepmann,et al.  Diffusion-controlled drug delivery systems: calculation of the required composition to achieve desired release profiles. , 1999, Journal of controlled release : official journal of the Controlled Release Society.

[46]  A. Moes,et al.  Leaching of pectin from mixed pectin/insoluble polymer films intended for colonic drug delivery , 1998 .

[47]  K. C. Ting,et al.  Microparticles of poly(dl-lactic-co-glycolic acid)/poly(ethylene glycol) blends for controlled drug delivery , 1997 .

[48]  K. Lonsdale.  X-Ray Diffraction , 1971, Nature.