NORTRIP - Non-exhaust road traffic induced particle emissions : development of a model for assessing the effect on air quality and exposure

The PM10 concentrations exceed the EU limit values in almost all countries in Europe. Especially, in many Nordic cities, non-exhaust particle emissions are the main reason for high PM10 levels along densely trafficked roads. This is connected to the use of studded tyres and winter time road traction maintenance, e.g. salting and sanding. The ultimate aim of the project has been to develop a process based emission model, that can be applied in any city without site specific empirical factors, for management and evaluation of abatement strategies and that is able to describe the (non-exhaust) emissions on an hourly or at least daily basis with satisfactory accuracy. The model is built upon existing road dust emission models, combined with field and laboratory measurements. The major features of the model are:Road dust and salt loading is calculated based on a mass balance equationProduction of road dust, and subsequent emissions, are based on the total wear of road, brakes and tyresMaintenance activities (e.g. salting, sanding, cleaning, ploughing) contribute to the mass balance as well as processes such as drainage and splash/sprayRetention of road surface dust is dependent on the surface moisture contentThe road surface moisture is calculated based on a mass balance equation for surface water and iceEvaporation is based on energy balance modelling of the road surfaceMaintenance activities (e.g. cleaning, ploughing, salt solutions) and processes (e.g. drainage, splash/ spray) are included in the moisture mass balanceThe impact of salting on both dust retention and melt temperature is considered

[1]  Roy M Harrison,et al.  Sources and properties of non-exhaust particulate matter from road traffic: a review. , 2008, The Science of the total environment.

[2]  Kaarle Kupiainen,et al.  Road Dust from Pavement Wear and Traction Sanding , 2007 .

[3]  David Proffitt,et al.  Tailpipe, resuspended road dust, and brake-wear emission factors from on-road vehicles , 2003 .

[4]  Mats Gustafsson,et al.  Traffic-generated emissions of ultrafine particles from pavement–tire interface , 2006 .

[5]  Christer Johansson,et al.  Automobile tires--a potential source of highly carcinogenic dibenzopyrenes to the environment. , 2012, Environmental science & technology.

[6]  Christer Johansson,et al.  Studies of some measures to reduce road dust emissions from paved roads in Scandinavia , 2006 .

[7]  Janne Berger,et al.  A generalised model for traffic induced road dust emissions. Model description and evaluation , 2011 .

[8]  K. Kupiainen,et al.  The Effect of Traction Sanding on Urban Suspended Particles in Finland , 2004, Environmental monitoring and assessment.

[9]  E. Nilsson,et al.  The relationship between 0.25–2.5 μm aerosol and CO 2 emissions over a city , 2010 .

[10]  Kaarle Kupiainen,et al.  Experimental studies about the impact of traction sand on urban road dust composition. , 2003, The Science of the total environment.

[11]  Matthias Ketzel,et al.  Evaluation of a road dust suspension model for predicting the concentrations of PM10 in a street canyon , 2011 .

[12]  Michael Gasser,et al.  Toxic effects of brake wear particles on epithelial lung cells in vitro , 2009, Particle and Fibre Toxicology.

[13]  P. Boulter,et al.  PPR 065 A REVIEW OF EMISSION FACTORS AND MODELS FOR ROAD VEHICLE NON-EXHAUST PARTICULATE MATTER , 2005 .

[14]  John G. Watson,et al.  Vehicle-based road dust emission measurement: I—methods and calibration , 2003 .

[15]  Mats Gustafsson,et al.  Properties and toxicological effects of particles from the interaction between tyres, road pavement and winter traction material. , 2008, The Science of the total environment.

[16]  Christer Johansson,et al.  A model for vehicle-induced non-tailpipe emissions of particles along Swedish roads , 2005 .

[17]  Brynhild Snilsberg Pavement wear and airborne dust pollution in Norway , 2008 .

[18]  Timo Mäkelä,et al.  Size and composition of airborne particles from pavement wear, tires, and traction sanding. , 2005, Environmental science & technology.

[19]  Liisa Pirjola,et al.  Non-exhaust emission measurement system of the mobile laboratory SNIFFER , 2009 .

[20]  Christer Johansson,et al.  Factors affecting non-tailpipe aerosol particle emissions from paved roads: On-road measurements in Stockholm, Sweden , 2008 .

[21]  J. Kukkonen,et al.  Source-Receptor and Inverse Modelling to quantify urban PARTiculate emissions (SRIMPART) , 2009 .

[22]  Christer Johansson,et al.  Spatial & temporal variations of PM10 and particle number concentrations in urban air , 2007, Environmental monitoring and assessment.

[23]  Liisa Pirjola,et al.  “Sniffer”—a novel tool for chasing vehicles and measuring traffic pollutants , 2004 .

[24]  B. Brunekreef,et al.  Epidemiological evidence of effects of coarse airborne particles on health , 2005, European Respiratory Journal.

[25]  C. Johansson,et al.  Road Dust Emissions from Paved Roads Measured Using Different Mobile Systems , 2010, Journal of the Air & Waste Management Association.

[26]  U. Olofsson,et al.  Size, Shape, and Elemental Composition of Airborne Wear Particles from Disc Brake Materials , 2010 .

[27]  Hampden D. Kuhns,et al.  Vehicle-based road dust emission measurement—Part II: Effect of precipitation, wintertime road sanding, and street sweepers on inferred PM10 emission potentials from paved and unpaved roads , 2003 .

[28]  I. Ishaaya,et al.  Properties and toxicological significance of diflubenzuron hydrolase activity in Spodoptera littoralis larvae , 1988 .

[29]  J. Gerring A case study , 2011, Technology and Society.

[30]  Hampden D. Kuhns,et al.  Testing Re-entrained Aerosol Kinetic Emissions from Roads : a new approach to infer silt loading on roadways , 2001 .

[31]  Christer Johansson,et al.  Estimated Short-Term Effects of Coarse Particles on Daily Mortality in Stockholm, Sweden , 2011, Environmental health perspectives.