论文信息 - A Numerical Prediction Method for the Auto-Ignition Process in a Homogeneous Charge Compression Ignition Engine

A Numerical Prediction Method for the Auto-Ignition Process in a Homogeneous Charge Compression Ignition Engine

An auto-ignition process in a homogeneous charge compression ignition engine has been numerically solved by the Very Large Eddy Simulation (VLES) which integrates a reduced kinetic model for the low temperature oxidationof hydrocarbon fuels. We employ a new method to set the initial turbulent velocity field, reforming the velocity field so that the turbulence dissipation process may fit the results of the K-e model simulation. The phase-averaged quantities of the VLES agree well with those of the K-e model simulation. The VLES exhibits the spatially random appearance of auto-ignition sites, which is similar to experimental observations shown in the reference literature.

[1] R. Reitz,et al. Modeling and Experiments of HCCI Engine Combustion Using Detailed Chemical Kinetics with Multidimensional CFD , 2001 .

[2] W. Lee,et al. Multidimensional Modelling of Knocking Combustion in SI Engines , 1985 .

[3] Kazuie Nishiwaki,et al. Numerical Analysis of the Interaction between Thermo-Fluid Dynamics and Auto-Ignition Reaction in Spark Ignition Engines , 2003 .

[4] Kiyosi Horiuti. Large Eddy Simulation of Turbulent Channel Flow by One-Equation Modeling , 1985 .

[5] Hiromichi Yanagihara. Simultaneous Reduction of NOx and Soot in Diesel Engines Using a New Mixture Preparation Method. , 1997 .

[6] Kazushi Nishimoto,et al. Turbulence intensity and spatial integral scale during compression and expansion strokes in a four-cycle reciprocating engine , 1987 .

[7] P. S. Myers,et al. Heat Transfer Rates at Gas-Wall Interfaces in Motored Piston Engine , 1973 .

[8] Kazuie Nishiwaki,et al. Numerical Analysis of the Location of Knock Initiation in S. I. Engines , 2000 .