Mitigation of carbon deposits formation in intermediate temperature solid oxide fuel cells fed with dry methane by anode doping with barium

Abstract The effect of barium doping on a fuel cell anode consisting of a Ni 0.53 Cu 0.47 alloy and gadolinia doped ceria cermet (50:50 wt.) was investigated in an intermediate temperature solid oxide fuel cell (IT-SOFC) fed with dry methane. IT-SOFCs containing the same cathode-electrolyte configuration but equipped with different anodes were compared in terms of performance, steady state operation, and formation of carbon deposits on the anode surface. After proper cell conditioning, similar maximum power densities of 284 mW cm −2 and 310 mW cm −2 were obtained in dry methane fuel at 750 °C for the anodic compositions with and without barium, respectively. The anode containing barium did not show significant carbon deposits after a 200 h time-study in dry methane whereas the anode without barium showed the presence of carbon deposits as evidenced by X-ray diffraction (XRD). Both anode formulations showed carbon deposits when exposed to dry CH 4 in ex-situ experiments. The electrochemical profile recorded during the time-study was different in the two systems. In the absence of barium, a slow and progressive increase in performance as a function of time was achieved. On the contrary, the Ba-doped anode achieved optimum performance in a short time. It is determined that the presence of barium reduces carbon deposition under fuel cell conditions and influences the electrochemical behaviour.

[1]  George E. Marnellos,et al.  Methane activation on a La0.6Sr0.4Co0.8Fe0.2O3 perovskite: Catalytic and electrocatalytic results , 1998 .

[2]  M. Sommer,et al.  Carbon dioxide reforming of methane on nickel catalysts , 1989 .

[3]  A. Kaiser,et al.  Niobia Based Rutile Materials as SOFC Anodes , 2001 .

[4]  John T. S. Irvine,et al.  Tetragonal tungsten bronze type phases (Sr1−xBax)0.6Ti0.2Nb0.8O3−δ: Material characterisation and performance as SOFC anodes , 2000 .

[5]  Malcolm L. H. Green,et al.  Methane Oxyforming for Synthesis Gas Production , 2007 .

[6]  John T. S. Irvine,et al.  Improved Oxidation of Hydrocarbons with New Electrodes in High Temperature Fuel Cells , 2001 .

[7]  S. A. Barnett,et al.  A direct-methane fuel cell with a ceria-based anode , 1999, Nature.

[8]  Mogens Bjerg Mogensen,et al.  High-temperature conversion of methane on a composite gadolinia-doped ceria–gold electrode , 1999 .

[9]  John T. S. Irvine,et al.  A redox-stable efficient anode for solid-oxide fuel cells , 2003, Nature materials.

[10]  Raymond J. Gorte,et al.  Ceria-Based Anodes for the Direct Oxidation of Methane in Solid Oxide Fuel Cells , 1995 .

[11]  J. Rostrup-Nielsen.  Coking on nickel catalysts for steam reforming of hydrocarbons , 1974 .

[12]  W. L. Worrell,et al.  Cu-Ni Cermet Anodes for Direct Oxidation of Methane in Solid-Oxide Fuel Cells , 2002 .

[13]  V. Antonucci,et al.  Preparation and sintering of Ce1−xGdxO2−x/2 nanopowders and their electrochemical and EPR characterization , 2004 .

[14]  A. Gadalla,et al.  The role of catalyst support on the activity of nickel for reforming methane with CO2 , 1988 .

[15]  G. Busca,et al.  New Pd/Pt on Mg/Al basic mixed oxides for the hydrogenation and hydrogenolysis of naphthalene , 2004 .

[16]  V. Antonucci,et al.  Performance and life-time behaviour of NiCu–CGO anodes for the direct electro-oxidation of methane in IT-SOFCs , 2007 .

[17]  J. Herle,et al.  Oxalate coprecipitation of doped ceria powder for tape casting , 1998 .

[18]  M. Sommer,et al.  Synthesis and Characterization of Catalysts in the System A12O3-MgO-NiO-Ni for Methane Reforming with CO2 , 1989 .

[19]  Jens R. Rostrup-Nielsen,et al.  SULFUR-PASSIVATED NICKEL CATALYSTS FOR CARBON-FREE STEAM REFORMING OF METHANE , 1984 .

[20]  T. Fukui,et al.  Suppression of carbon deposition in the CO2-reforming of CH4 by adding basic metal oxides to a Ni/Al2O3 catalyst , 1996 .

[21]  Malcolm L. H. Green,et al.  Partial oxidation of methane to synthesis gas using carbon dioxide , 1991, Nature.

[22]  Mogens Bjerg Mogensen,et al.  Kinetic and geometric aspects of solid oxide fuel cell electrodes , 1996 .

[23]  R. Gorte,et al.  Direct hydrocarbon solid oxide fuel cells. , 2004, Chemical reviews.

[24]  Raymond J. Gorte,et al.  A Study of SOFC Anodes Based on Cu-Ni and Cu-Co Bimetallics in CeO2 ­ YSZ , 2004 .

[25]  U. Stimming,et al.  Recent anode advances in solid oxide fuel cells , 2007 .

[26]  E. Tanabe,et al.  Partial oxidation of methane to synthesis gas over supported Ni catalysts prepared from Ni-Ca/Al-layered double hydroxide , 2001 .