Shorted square-ring slot antennas with a rectangular slot are presented for the global positioning system (GPS) and third-generation communication (3G) operations.The shorted square-ring slot antenna is used as the basic configuration for circular polarization in the GPS band. Then, an added rectangular slot inside the square-ring slot will radiate linearly polarized wave in the 3G band. Because the added slot has little influence in the GPS band's characteristics, the design rule is very simple. The experimental impedance and axial-ratio bandwidths for the GPS band are 19.8 and 4.5%, respectively. Also, the impedance bandwidth and the antenna gain for the 3G band are 14.9% and 2.5 dBi, respectively. The antenna characteristics such as bandwidths and gain satisfy the dual-band's antenna requirements. Especially, the antenna radiation patterns are very suitable to apply in the GPS and 3G systems. © 2010 Wiley Periodicals, Inc. Microwave Opt Technol Lett 52:855–857, 2010; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.25051
[1]
Sheau-Shong Bor,et al.
A shorted square-ring slot antenna with a branched slot for the 1575 MHz and 2.4 GHz dual-band operations
,
2009
.
[2]
Kow-Ming Chang,et al.
A NOVEL DESIGN OF A MICROSTRIP- FED SHORTED SQUARE-RING SLOT ANTENNA FOR CIRCULAR POLARIZATION
,
2007
.
[3]
Kin-Lu Wong,et al.
Microstrip-line-fed printed shorted ring-slot antennas for circular polarization
,
2001
.
[4]
Stefano Maci,et al.
Dual-band slot-loaded patch antenna
,
1995
.
[5]
H. Morishita,et al.
Analysis of a cavity-backed annular slot antenna with one point shorted
,
1991
.
[6]
Chung-I G. Hsu,et al.
Studies of small dualband annular‐ring slot antenna with a pair of implanted spur‐like slits
,
2007
.