Reducing fuel consumption through modular vehicle architectures

By identifying energy waste streams in vehicles fuel consumption and introducing the concept of lean driving systems, a technological gap for reducing fuel consumption was identified. This paper proposes a solution to overcome this gap, through a modular vehicle architecture aligned with driving patterns. It does not address detailed technological solutions; instead it models the potential effects in fuel consumption through a modular concept of a vehicle and quantifies their dependence on vehicle design parameters (manifesting as the vehicle mass) and user behavior parameters (driving patterns manifesting as the use of a modular car in lighter and heavier mode, in urban and highway cycles). Modularity has been functionally applied in automotive industry as manufacture and assembly management strategies; here it is thought as a product development strategy for flexibility in use, driven by environmental concerns and enabled by social behaviors. The authors argue this concept is a step forward in combining technological solutions and social behavior, of which eco-driving is a vivid example, and potentially evolutionary to a lean, more sustainable, driving culture.

[1]  George Chryssolouris,et al.  Product modularity and assembly systems: An automotive case study , 2011 .

[2]  Tommy Gärling,et al.  HOUSEHOLD CHOICES OF CAR-USE REDUCTION MEASURES , 2000 .

[3]  Kanok Boriboonsomsin,et al.  Energy and emissions impacts of a freeway-based dynamic eco-driving system , 2009 .

[4]  Mark Hadfield,et al.  A sustainable product design model , 2006 .

[5]  Cutler J. Cleveland,et al.  Encyclopedia of Energy , 2004 .

[6]  Jan L. Spoormaker,et al.  Materials selection combined with optimal structural design: concept and some results , 2002 .

[7]  Yadollah Saboohi,et al.  Model for developing an eco-driving strategy of a passenger vehicle based on the least fuel consumption , 2009 .

[8]  Lucia Gauchia,et al.  Airport electric vehicle powered by fuel cell , 2007 .

[9]  George Marsh,et al.  Next step for automotive materials , 2003 .

[10]  R. Scholz,et al.  Reducing energy consumption in road transport through hybrid vehicles: investigation of rebound effects, and possible effects of tax rebates , 2007 .

[11]  Lester B. Lave,et al.  A free lunch at higher CAFE? A review of economic, environmental and social benefits , 1996 .

[12]  Jan Swevers,et al.  Minimization of the fuel consumption of a gasoline engine using dynamic optimization , 2009 .

[13]  S. Jack Hu,et al.  A method for optimal design of automotive body assembly using multi-material construction , 2008 .

[14]  Steven Broekx,et al.  Using on-board logging devices to study the longer-term impact of an eco-driving course , 2009 .

[15]  Yoshimi Ito,et al.  Modular Design for Machine Tools , 2008 .

[16]  Scott W. Jorgensen,et al.  Hydrogen storage tanks for vehicles: Recent progress and current status , 2011 .

[17]  Mahmoud M. Farag,et al.  Quantitative methods of materials substitution: Application to automotive components , 2008 .

[18]  Sujit Das,et al.  Life cycle energy impacts of automotive liftgate inner , 2005 .

[19]  Miguel Torres García,et al.  Infantry mobility hybrid electric vehicle performance analysis and design , 2011 .

[20]  J. Barkenbus.  Eco-driving: An overlooked climate change initiative , 2010 .

[21]  Antonino Risitano,et al.  Materials selection in the Life-Cycle Design process: a method to integrate mechanical and environmental performances in optimal choice , 2005 .

[22]  Catarina Bjelkengren,et al.  The impact of mass decompounding on assessing the value of vehicle lightweighting , 2008 .

[23]  G. Fontana,et al.  Variable valve timing for fuel economy improvement in a small spark-ignition engine , 2009 .

[24]  D. Dissanayake,et al.  Investigating household vehicle ownership, mode choice and trip sharing decisions using a combined revealed preference/stated preference Nested Logit model: case study in Bangkok Metropolitan Region , 2010 .

[25]  Jobst Hapke,et al.  Filling procedure for vehicles with compressed hydrogen tanks , 2008 .

[26]  Hyung Chul Kim,et al.  LIFE CYCLE OPTIMIZATION OF OWNERSHIP COSTS AND EMISSIONS REDUCTION IN US VEHICLE RETIREMENT DECISIONS , 2005 .

[27]  A. Tharumarajah,et al.  Is there an environmental advantage of using magnesium components for light-weighting cars? , 2007 .

[28]  Mark Miodownik,et al.  The case for teaching the arts , 2003 .

[29]  A. Nee,et al.  A proposed tool to integrate environmental and economical assessments of products , 2003 .

[30]  J. L. Stoyell,et al.  Analyzing design activities which affect the life-cycle environmental performance of large made-to-order products , 2001 .

[31]  C. H. Cáceres,et al.  Transient environmental effects of light alloy substitutions in transport vehicles , 2009 .

[32]  Jillian Anable,et al.  Energy policy , 1974 .

[33]  I. Verpoest,et al.  Optimisation of a GMT-based cold pressing technique for low cost textile reinforced thermoplastic composites , 1999 .

[34]  Ping Zhu,et al.  Lightweight Design of Automotive Front Side Rail Based on Robust Optimisation , 2007 .

[35]  Konstantinos Salonitis,et al.  Modularity concepts for the automotive industry: A critical review , 2009 .

[36]  Richard Patton,et al.  Causes of weight reduction effects of material substitution on constant stiffness components , 2004 .

[37]  Chenghong Gu,et al.  Potential for reducing GHG emissions and energy consumption from implementing the aluminum intensive , 2010 .

[38]  Kwang-Kyu Seo,et al.  A knowledge-based approximate life cycle assessment system for evaluating environmental impacts of product design alternatives in a collaborative design environment , 2006, Adv. Eng. Informatics.

[39]  Helena Titheridge,et al.  Vehicle mass as a determinant of fuel consumption and secondary safety performance , 2009 .

[40]  M. B. G. Castro,et al.  Materials selection for an automotive structure by integrating structural optimization with environmental impact assessment , 2004 .

[41]  Michael F. Ashby,et al.  Materials and Design: The Art and Science of Material Selection in Product Design , 2002 .

[42]  Ina Meyer,et al.  International passenger transport and climate change: A sector analysis in car demand and associated CO2 emissions from 2000 to 2050 , 2007 .

[43]  Björn Andersson,et al.  Metal resource constraints for electric-vehicle batteries , 2001 .

[44]  Xunmin Ou,et al.  Life-cycle analysis on energy consumption and GHG emission intensities of alternative vehicle fuels in China , 2012 .

[45]  Alireza Ashori,et al.  Wood-plastic composites as promising green-composites for automotive industries! , 2008, Bioresource technology.

[46]  Hai Yang,et al.  Carpooling and congestion pricing in a multilane highway with high-occupancy-vehicle lanes , 1999 .

[47]  Brian D. James,et al.  Affordable hydrogen supply pathways for fuel cell vehicles , 1998 .

[48]  Yuichi Moriguchi,et al.  Current status of actual fuel-consumptions of petrol-fuelled passenger vehicles in Japan , 2004 .

[49]  Mattias Höjer,et al.  How much transport can the climate stand?--Sweden on a sustainable path in 2050 , 2006 .

[50]  Stuart Macey,et al.  H-Point: The Fundamentals of Car Design & Packaging , 2009 .