Liquid-metal-electrode-based compact, flexible, and high-power thermoelectric device

Abstract There is an increasing demand for power sources of wearable sensors and personal refrigeration. Flexible thermoelectric device (FTED) can be ideal candidate for such purpose. This paper reports on a compact, high-power and flexible thermoelectric device based on a bulk thermoelectric (TE) material. For thermoelectric device based on bulk TE materials to be flexible, (i) flexible electrodes and (ii) holders to secure TE materials are required. In FTED, we have used liquid-metal encapsulated in polydimethylsiloxane (PDMS) as electrodes on one side above the bending neutral axis and flexible printed circuit boards (FPCB) as electrodes below the bending neutral axis. Hence, the stretchability of the liquid metal electrode and flatness of the FPCB are fully utilized to reduce thermal contact resistance. Additionally, we used PDMS and flexible wires as holders to eliminate filler materials that annihilate thermal bypass, i.e., heat transfer not going through TE materials. For refrigeration using portable batteries as power sources, the refrigerated skin temperature was lowered by 5.4 K which is adequate for humans to perceive coldness, according to theoretical analysis. For human body-heat harvesting, the open-circuit voltage and output power density were 7.38 mV and 8.32 μW/cm2 or 123.74 μW, respectively. This implies that the FTED can be used both as a portable refrigerator and a wearable body-heat harvester.

[1]  Lasse Rosendahl,et al.  Waste Heat Recovery from a Marine Waste Incinerator Using a Thermoelectric Generator , 2012, Journal of Electronic Materials.

[2]  C. Van Hoof,et al.  Micropower energy harvesting , 2009, ESSDERC 2009.

[3]  R. Vullers,et al.  Wearable Thermoelectric Generators for Body-Powered Devices , 2009 .

[4]  P. Wright,et al.  High-performance dispenser printed MA p-type Bi(0.5)Sb(1.5)Te(3) flexible thermoelectric generators for powering wireless sensor networks. , 2013, ACS applied materials & interfaces.

[5]  Mehmet C. Öztürk,et al.  Flexible thermoelectric generator using bulk legs and liquid metal interconnects for wearable electronics , 2017 .

[6]  N. Ghaddar,et al.  A new transient bioheat model of the human body and its integration to clothing models , 2007 .

[7]  Graham Town,et al.  Review of solar energy for biofuel extraction , 2018 .

[8]  Yu-Wei Chang,et al.  Thermoelectric water-cooling device applied to electronic equipment , 2010 .

[9]  H. Hng,et al.  Fabrication of flexible thermoelectric thin film devices by inkjet printing. , 2014, Small.

[10]  Ali Elkamel,et al.  Design and experimental investigation of portable solar thermoelectric refrigerator , 2009 .

[11]  Wei-Chin Chang,et al.  A mathematic model of thermoelectric module with applications on waste heat recovery from automobile engine , 2010 .

[12]  C. Van Hoof,et al.  Thermoelectric Converters of Human Warmth for Self-Powered Wireless Sensor Nodes , 2007, IEEE Sensors Journal.

[13]  Joseph Richardson,et al.  High-performance and flexible thermoelectric films by screen printing solution-processed nanoplate crystals , 2016, Scientific Reports.

[14]  Vladimir Leonov,et al.  Thermoelectric Energy Harvesting of Human Body Heat for Wearable Sensors , 2013, IEEE Sensors Journal.

[15]  D. Astrain,et al.  Development of a thermoelectric refrigerator with two-phase thermosyphons and capillary lift , 2009 .

[16]  G. J. Snyder,et al.  Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics , 2015, Science.

[17]  Yan Xie,et al.  Microfabrication of Flexible Self-Repairing Ground Reaction Sensor With Liquid Metal Electrodes , 2011 .

[18]  M. Li,et al.  Enhancement of Conductivity and Thermoelectric Property of PEDOT:PSS via Acid Doping and Single Post‐Treatment for Flexible Power Generator , 2018, Advanced Sustainable Systems.

[19]  Deqing Mei,et al.  Wearable thermoelectric generator to harvest body heat for powering a miniaturized accelerometer , 2018 .

[20]  J. Goldemberg,et al.  Renewable energy--traditional biomass vs. modern biomass , 2004 .

[21]  Ji-Hui Yang,et al.  Automotive Applications of Thermoelectric Materials , 2009 .

[22]  Yani Chen,et al.  Solution processed organic thermoelectrics: towards flexible thermoelectric modules , 2015 .

[23]  Michael D. Dickey,et al.  Self‐Healing Stretchable Wires for Reconfigurable Circuit Wiring and 3D Microfluidics , 2013, Advanced materials.

[24]  D. Rowe.  Thermoelectrics Handbook , 2005 .

[25]  James W. Evans,et al.  Dispenser-printed planar thick-film thermoelectric energy generators , 2011 .

[26]  Zichen Chen,et al.  Wearable Thermoelectric Generator With Copper Foam as the Heat Sink for Body Heat Harvesting , 2018, IEEE Access.

[27]  Alic Chen,et al.  Printed Se-Doped MA n-Type Bi2Te3 Thick-Film Thermoelectric Generators , 2012, Journal of Electronic Materials.

[28]  K. T. Chau,et al.  Thermoelectric automotive waste heat energy recovery using maximum power point tracking , 2009 .

[29]  Lingai Luo,et al.  An experimental and numerical study of a thermoelectric air-cooling and air-heating system , 2008 .

[30]  V. Leonov.  Human Machine and Thermoelectric Energy Scavenging for Wearable Devices , 2011 .

[31]  Daoben Zhu,et al.  Inkjet-printed flexible organic thin-film thermoelectric devices based on p- and n-type poly(metal 1,1,2,2-ethenetetrathiolate)s/polymer composites through ball-milling , 2014, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[32]  Michael D. Dickey,et al.  Emerging Applications of Liquid Metals Featuring Surface Oxides , 2014, ACS applied materials & interfaces.

[33]  Ruzhu Wang,et al.  Experimental investigation and analysis on a thermoelectric refrigerator driven by solar cells , 2003 .

[34]  H. H. Pennes.  Analysis of tissue and arterial blood temperatures in the resting human forearm. 1948. , 1948, Journal of applied physiology.

[35]  Yunfei Dai,et al.  Experimental investigation on a thermoelectric refrigerator driven by solar cells , 2003 .

[36]  Bill J. Van Heyst,et al.  Thermal energy harvesting from the human body using flexible thermoelectric generator (FTEG) fabricated by a dispenser printing technique , 2016 .

[37]  S B Wilson,et al.  A tissue heat transfer model for relating dynamic skin temperature changes to physiological parameters. , 1988, Physics in medicine and biology.

[38]  Bill J. Van Heyst,et al.  A review of the state of the science on wearable thermoelectric power generators (TEGs) and their existing challenges , 2017 .

[39]  Alic Chen,et al.  Dispenser printed circular thermoelectric devices using Bi and Bi0.5Sb1.5Te3 , 2014 .

[40]  D. Astrain,et al.  Increase of COP in the thermoelectric refrigeration by the optimization of heat dissipation , 2003 .

[41]  Hui-Ming Wee,et al.  Renewable energy supply chains, performance, application barriers, and strategies for further development , 2012 .

[42]  Dimuthu Wijethunge,et al.  Simplified human thermoregulatory model for designing wearable thermoelectric devices , 2018 .

[43]  Cristiano Hora de Oliveira Fontes,et al.  Sustainable and renewable energy supply chain: A system dynamics overview , 2018 .

[44]  Hwanjoo Park,et al.  Flexible thermoelectric power generation system based on rigid inorganic bulk materials , 2017 .

[45]  Luca Francioso,et al.  Flexible thermoelectric generator for ambient assisted living wearable biometric sensors , 2011 .

[46]  S. Beeby,et al.  Flexible screen printed thick film thermoelectric generator with reduced material resistivity , 2014 .

[47]  C. Huizenga,et al.  Thermal sensation and comfort in transient non-uniform thermal environments , 2004, European Journal of Applied Physiology.

[48]  Dongkeon Lee,et al.  High power output from body heat harvesting based on flexible thermoelectric system with low thermal contact resistance , 2018, Journal of Physics D: Applied Physics.

[49]  Nandy Putra,et al.  The characterization of a cascade thermoelectric cooler in a cryosurgery device. , 2010 .

[50]  M. Sarrafzadeh,et al.  Effect of nitrifiers community on fouling mitigation and nitrification efficiency in a membrane bioreactor , 2018, Chemical Engineering and Processing - Process Intensification.

[51]  K. Lomas,et al.  A computer model of human thermoregulation for a wide range of environmental conditions: the passive system. , 1999, Journal of applied physiology.

[52]  D. Zrnić,et al.  On the resistivity and surface tension of the eutectic alloy of gallium and indium , 1969 .

[53]  E. Kondili,et al.  Environmental and social footprint of offshore wind energy. Comparison with onshore counterpart , 2016 .

[54]  B. Cho,et al.  A wearable thermoelectric generator fabricated on a glass fabric , 2014 .

[55]  Jing Liu,et al.  Suitability of a thermoelectric power generator for implantable medical electronic devices , 2007 .

[56]  R. Chein,et al.  Thermoelectric cooler application in electronic cooling , 2004 .

[57]  Hyeung-Sik Choi,et al.  Development of a temperature-controlled car-seat system utilizing thermoelectric device , 2007 .

[58]  Sheng Xu,et al.  Wearable thermoelectrics for personalized thermoregulation , 2019, Science Advances.

[59]  H. H. Pennes.  Analysis of tissue and arterial blood temperatures in the resting human forearm. , 1948, Journal of applied physiology.

[60]  Jingkun Xu,et al.  A simple thermoelectric device based on inorganic/organic composite thin film for energy harvesting , 2017 .

[61]  Hwanjoo Park,et al.  Mat-like flexible thermoelectric system based on rigid inorganic bulk materials , 2017 .

[62]  Yu-Wei Chang,et al.  Thermoelectric air-cooling module for electronic devices , 2009 .

[63]  Gao Min,et al.  Experimental evaluation of prototype thermoelectric domestic-refrigerators , 2006 .

[64]  SeongHwan Cho,et al.  Self-Powered Wearable Electrocardiography Using a Wearable Thermoelectric Power Generator , 2018 .

[65]  Byung Jin Cho,et al.  Hybrid composite of screen-printed inorganic thermoelectric film and organic conducting polymer for flexible thermoelectric power generator , 2014 .

[66]  Takao Ishida,et al.  Polymer thermoelectric modules screen-printed on paper , 2014 .

[67]  Byung Jin Cho,et al.  Structural design of a flexible thermoelectric power generator for wearable applications , 2018 .

[68]  D. Astrain,et al.  Computational model for refrigerators based on Peltier effect application , 2005 .