Effect of annealing temperature on magnetic properties of cold rolled high silicon steel thin sheet

[1]  C. Bolfarini,et al.  Magnetic properties evaluation of spray formed and rolled Fe–6.5 wt.% Si–1.0 wt.% Al alloy , 2007 .

[2]  S. Takemoto,et al.  Effects of Crystal Grain Size and Particle Size on Core Loss for Fe-Si Compressed Cores , 2007 .

[3]  Julio C. Teixeira,et al.  The optimum grain size for minimizing energy losses in iron , 2006 .

[4]  C. Bolfarini,et al.  Microstructure and Magnetic Properties of Fe-6.5wt%Si Alloy Obtained by Spray Forming Process , 2005 .

[5]  L. Dupré,et al.  Influence of atomic order on magnetic properties of Fe Si alloys , 2005 .

[6]  Tao Zhang,et al.  Magnetic properties of high silicon iron sheet fabricated by direct powder rolling , 2004 .

[7]  G. Chen,et al.  The effect of boron content on the processing for Fe–6.5 wt% Si electrical steel sheets , 2004 .

[8]  Y. Houbaert,et al.  Advances in the production of high-silicon electrical steel by thermomechanical processing and by immersion and diffusion annealing , 2004 .

[9]  Yvan Houbaert,et al.  High-silicon steel produced by hot dipping and diffusion annealing , 2002 .

[10]  Y. Houbaert,et al.  Production of high silicon steel for electrical applications by thermomechanical processing , 2003 .

[11]  E. Lavernia,et al.  The effect of casting method and heat treating condition on cold workability of high-Si electrical steel , 2001 .

[12]  G. Chen,et al.  Moisture induced environmental embrittlement of intermetallics , 2001 .

[13]  G. Chen,et al.  Surface reaction of polycrystalline Fe3Si alloys with oxygen and water vapor , 1998 .

[14]  Kazushi Ishiyama,et al.  The relationship of microstructure and magnetic properties in cold-rolled 6.5% Si-Fe alloy , 1996 .

[15]  B. Viala,et al.  Evolution of magnetomechanical damping and magnetic properties of pure iron siliconized up to 5.5 wt.% by chemical vapour deposition , 1994 .

[16]  K. Narita,et al.  Order-disorder effect on magnetic properties of rapidly quenched Fe-6.5%Si alloy , 1994 .

[17]  K. Ishiyama,et al.  Iron loss of grain size controlled very thin grain-oriented silicon steels , 1993 .

[18]  K. Sato,et al.  Effect of microstructure on the magnetic properties of 6.5% SiFe alloy , 1992 .

[19]  M. Abe,et al.  Commercial scale production of Fe-6.5 wt. % Si sheet and its magnetic properties , 1988 .

[20]  C. Chang,et al.  Frequency dependence of core loss in rapidly quenched Fe‐6.5 wt. %Si , 1988 .