Research on the universal model of filled-type evacuated tube with U-tube in uniform boundary condition

Abstract The heat transfer efficiency of solar collector tubes is a crucial factor for the application of solar heating and cooling systems (SHCS). How to enhance solar collector efficiency has become a hot topic. In this paper, a new type of collector tube – filled-type evacuated tube with U-tube (UFET), was presented to increase solar collector efficiency by eliminating the thermal resistance between the absorber tube and the copper fin of the conventional evacuated solar collector. First, a UFET heat transfer model was built with different U-tube structures and the universal UFET model in uniform boundary condition. Furthermore, the thermal performances of three types of UFET were compared theoretically and experimentally. The results show that the maximum solar collector efficiency of UFET with three U-tubes reaches 0.82 and is higher than other types with the same heat transfer surface area. In addition, the theoretical result is 4% higher than the experimental result, indicating that the developed model is validated by the experimental investigation in this study.

[1]  K. F. Fong,et al.  Comparative study of different solar cooling systems for buildings in subtropical city , 2010 .

[2]  Ruobing Liang,et al.  Thermal performance analysis of the glass evacuated tube solar collector with U-tube , 2010 .

[3]  Chaicharn Chotetanorm,et al.  Thermal performance analysis and economic evaluation of roof-integrated solar concrete collector , 2011 .

[4]  Hans-Martin Henning,et al.  Solar-assisted air conditioning in buildings : a handbook for planners , 2007 .

[5]  David Harrison,et al.  Predicted and in situ performance of a solar air collector incorporating a translucent granular aerogel cover , 2012 .

[6]  Jili Zhang,et al.  Performance analysis of a new-design filled-type solar collector with double U-tubes , 2013 .

[7]  Xudong Zhao,et al.  A novel hybrid heat pipe solar collector/CHP system—Part 1: System design and construction , 2004 .

[8]  Yong Kim,et al.  Thermal performances comparisons of the glass evacuated tube solar collectors with shapes of absorber tube , 2007 .

[9]  Ruobing Liang,et al.  Theoretical and experimental investigation of the filled-type evacuated tube solar collector with U tube , 2011 .

[10]  Gerardo Diaz,et al.  Performance Analysis and Design Optimization of a Mini-Channel Evacuated-Tube Solar Collector , 2008 .

[11]  Xudong Zhao,et al.  Developing a theoretical model to investigate thermal performance of a thin membrane heat-pipe solar collector , 2005 .

[12]  Xavier García Casals,et al.  Solar absorption cooling in Spain: Perspectives and outcomes from the simulation of recent installations , 2006 .

[13]  Gary Rosengarten,et al.  Thermal performance of a novel rooftop solar micro-concentrating collector , 2012 .

[14]  Hua Wang,et al.  Exergy Analysis of Flat Plate Solar Collectors , 2014, Entropy.