Process Modelling of the Calcium Looping Process and Validation Against 1 MWth Pilot Testing

Abstract The calcium carbonate looping (CaL) process is a promising post-combustion technology for CO2 capture from fossil-fired power plants and carbon intense industries like steel and cement manufacturing. A CaL system consists basically of two interconnected circulating fluidized bed (CFB) reactors using natural limestone as a sorbent. Inside the carbonator, CO2 contained in the flue gas is absorbed by the exothermic carbonation reaction, during endothermic sorbent regeneration in the calciner, CO2 is released consequently. The CaL technology has proven its feasibility in semi-industrial scale by pilot testing in various test rigs all over the world. For the further development of the process, models are required for the prediction of process characteristics in terms of heat and mass flows. Most critical to the calculation of an overall process performance is the CO2 absorption efficiency in the carbonator and, moreover, the decreasing CO2 carrying capacity of the sorbent during operation. The enrichment of impurities like ash or calcium sulfate in the circulating sorbent as well as the reduction in particle size due to attrition needs also to be taken into account when assessing the performance of a CaL system. The main focus of this paper is the development of an advanced steady state process model and its validation against 1 MWth long term pilot testing. The validation of the process model showed good agreement in predicting the CO2 absorption efficiency of the carbonator as well as the sorbent regeneration in calciner. Furthermore, the composition, and the effect of attrition to particle size distribution of the circulating sorbent are reproduced with good accordance. The process model is further applied for a sensitivity study to show the influence of crucial parameters on the particle size reduction as well as on the calciner efficiency.

[1]  M. Aresta,et al.  The changing paradigm in CO2 utilization , 2013 .

[2]  Ajay R. Bidwe,et al.  Development of the calcium looping CO2 capture technology from lab to pilot scale at IFK, University of Stuttgart , 2014 .

[3]  E. J. Anthony,et al.  Capture of CO2 from combustion gases in a fluidized bed of CaO , 2004 .

[4]  Jochen Ströhle,et al.  Carbonate looping experiments in a 1 MWth pilot plant and model validation , 2014 .

[5]  Octave Levenspiel,et al.  Fluidized reactor models. 1. For bubbling beds of fine, intermediate, and large particles. 2. For the lean phase: freeboard and fast fluidization , 1990 .

[6]  A. Sánchez-Biezma,et al.  Calcium Looping with Enhanced Sorbent Performance: Experimental Testing in A Large Pilot Plant , 2014 .

[7]  Jochen Ströhle,et al.  Thermodynamic Evaluation and Cold Flow Model Testing of an Indirectly Heated Carbonate Looping Process , 2013 .

[8]  T. Shimizu,et al.  A twin fluid-bed reactor for removal of CO2 from combustion processes , 1999 .

[9]  Luis M. Romeo,et al.  Primary fragmentation of limestone under oxy-firing conditions in a bubbling fluidized bed , 2011 .

[10]  M. Romano.  Modeling the carbonator of a Ca-looping process for CO2 capture from power plant flue gas , 2012 .

[11]  Gemma Grasa,et al.  Modelling the continuous calcination of CaCO3 in a Ca-looping system , 2013 .

[12]  Jochen Ströhle,et al.  Carbonate looping process simulation using a 1D fluidized bed model for the carbonator , 2011 .

[13]  Edgar Muschelknautz,et al.  Die Berechnung von Zyklonabscheidern für Gase , 1972 .

[14]  Fabio Montagnaro,et al.  The influence of temperature on limestone sulfation and attrition under fluidized bed combustion conditions , 2010 .

[15]  John R. Grace,et al.  Limestone particle attrition and size distribution in a small circulating fluidized bed , 2008 .

[16]  Fabrizio Scala,et al.  Fluidized bed technologies for near-zero emission combustion and gasification , 2013 .

[17]  Jochen Ströhle,et al.  Continuous CO2 Capture in a 1‐MWth Carbonate Looping Pilot Plant , 2013 .

[18]  Abass A. Olajire,et al.  Valorization of greenhouse carbon dioxide emissions into value-added products by catalytic processes , 2013 .

[19]  Jochen Ströhle,et al.  Design and Erection of a 300 kWth Indirectly Heated Carbonate Looping Test Facility , 2014 .

[20]  E. J. Anthony,et al.  Fluidized bed combustion systems integrating CO2 capture with CaO. , 2005, Environmental science & technology.

[21]  Octave Levenspiel,et al.  Circulating fluidized-bed reactors , 1997 .