Polyethylene terephthalate (PET) optical properties deterioration induced by temperature and protective effect of organically modified SiO2–TiO2 coating
暂无分享,去创建一个
J. Kubacki | J. Krzak | A. Szczurek | C. Armellini | A. Chiasera | A. Łukowiak | S. Varas | Kamila Startek | Thị Ngọc Lam Trần | A. Carlotto | A. Mazur-Nowacka | Maurizio Ferrari | Anna Gasiorek | R. Dell’Anna
[1] A. G. Ramu,et al. Synthesis of Transparent ZnO–TiO2 and Its Nanocomposites for Ultraviolet Protection of a Polyethylene Terephthalate (PET) Film , 2022, Catalysts.
[2] I. Raptis,et al. Non-Destructive Characterization of Selected Types of Films and Other Layers via White Light Reflectance Spectroscopy (WLRS) , 2022, Micro.
[3] P. D. Fleming,et al. Controlling unequal surface energy results caused by test liquids: the case of UV/O3 Treated PET , 2022, Scientific Reports.
[4] T. Leisegang,et al. Hybrid sol-gel materials for realization of radiation protective coatings—a review with emphasis on UV protective materials , 2021, Journal of Sol-Gel Science and Technology.
[5] A. Bachmatiuk,et al. Structural and Functional Properties of Fluorinated Silica Hybrid Barrier Layers on Flexible Polymeric Foil , 2021, Coatings.
[6] Stefano Varas,et al. From flexible electronics to flexible photonics: A brief overview , 2021 .
[7] M. Veselý,et al. Low-Temperature Mineralisation of Titania-Siloxane Composite Layers , 2021, Catalysts.
[8] D. Nykypanchuk,et al. Characterization of polyaniline thin films prepared on polyethylene terephthalate substrate , 2020, Polymer Bulletin.
[9] R. Nisticò. Polyethylene terephthalate (PET) in the packaging industry , 2020 .
[10] Sang Yoon Park,et al. Preparation and characterization of heat-resistant PET/bio-based polyester blends for hot-filled bottles , 2020 .
[11] M. Ferrari,et al. Flexible Photonics: Where Are We Now? , 2020, 2020 22nd International Conference on Transparent Optical Networks (ICTON).
[12] J. Ramkumar,et al. Optically Transparent Protective Coating for ITO-Coated PET-Based Microwave Metamaterial Absorbers , 2020, IEEE Transactions on Components, Packaging and Manufacturing Technology.
[13] H. Heim,et al. Influence of the degree of crystallinity and the surface free energy on the adhesion properties of different PLA/PBS blends in multicomponent injection molding , 2020 .
[14] T. Ohishi,et al. Heat-Resistant Properties of a SiO2-Coated PET Film Prepared by Irradiating a Polysilazane-Coated Film with Excimer Light , 2020, Materials Sciences and Applications.
[15] J. Kaleta,et al. Sol-gel multilayered coatings for reduction of H2 permeation , 2019 .
[16] J. Poulis,et al. Effect of UV/ozone treatment on the wettability and adhesion of polymeric systems , 2019, The Journal of Adhesion.
[17] X. Ren,et al. Preparation and characterization of polyester fabrics coated with TiO2/Benzotriazole for UV protection , 2019, Colloids and Surfaces A: Physicochemical and Engineering Aspects.
[18] T. Ohishi,et al. Formation and gas barrier properties of silica thin films formed on heat resistant PET (Polyethylene Terephthalate) substrate by excimer light irradiation to polysilazane coatings , 2019, Materials Letters.
[19] Jiangtao Hu,et al. Fabrication of highly durable polysiloxane-zinc oxide (ZnO) coated polyethylene terephthalate (PET) fabric with improved ultraviolet resistance, hydrophobicity, and thermal resistance. , 2019, Journal of colloid and interface science.
[20] O. Penkov,et al. Highly transparent micro-patterned protective coatings on polyethylene terephthalate for flexible solar cell applications , 2018, Solar Energy.
[21] U. Maity,et al. Effect of Aqueous HCl with Dissolved Chlorine on Certain Corrosion-Resistant Polymers , 2018, ACS omega.
[22] G. Guerra,et al. Vibrational Spectra of Poly(ethylene terephthalate) Chains in the Mesomorphic Form , 2018 .
[23] Rafael Auras,et al. A roadmap towards green packaging: The current status and future outlook for polyesters in the packaging industry , 2017 .
[24] Y. S. Lee,et al. Heat resistance, impact strength, and transparency of PET copolymer containing fluorenylidene bis(2-phenoxyethanol) , 2017, Fibers and Polymers.
[25] T. Nakajima,et al. Morphological change of crystalline polymer films by annealing: substrate‐ and heating/cooling‐rate‐dependent surface roughness , 2017 .
[26] Yuan Hu,et al. Fabrication of montmorillonite and titanate nanotube based coatings via layer-by-layer self-assembly method to enhance the thermal stability, flame retardancy and ultraviolet protection of polyethylene terephthalate (PET) fabric , 2016 .
[27] K. Ishikawa,et al. Effect of calcium-ozone treatment on chemical and biological properties of polyethylene terephthalate. , 2015, Journal of biomedical materials research. Part B, Applied biomaterials.
[28] Roger Narayan,et al. Physical, Thermal, and Mechanical Properties of Polymers , 2015 .
[29] V. Deshpande,et al. Isoconversional kinetic analysis of DSC data on nonisothermal crystallization: Estimation of Hoffman-Lauritzen parameters and thermal transitions in PET/MMT nanocomposites , 2014 .
[30] M. Laus,et al. Rigid amorphous fraction and melting behavior of poly(ethylene terephthalate) , 2014, Colloid and Polymer Science.
[31] Ping Zhang,et al. Flexible integrated photonics: where materials, mechanics and optics meet [Invited] , 2013 .
[32] É. Devaux,et al. Development of fire resistant PET fibrous structures based on phosphinate-POSS blends , 2012 .
[33] Andrzej Bartnik,et al. EUV-induced physico-chemical changes in near-surface layers of polymers , 2011 .
[34] Ali Yaraş,et al. Crystallization Behavior of PET Materials , 2011 .
[35] E. Arzt,et al. Nanofibrillar Patterns by Plasma Etching: The Influence of Polymer Crystallinity and Orientation in Surface Morphology , 2010 .
[36] Jang‐Kyo Kim,et al. Cleaning and Functionalization of Polymer Surfaces and Nanoscale Carbon Fillers by UV/Ozone Treatment: A Review , 2009 .
[37] A. Varesano,et al. Thermal stability and flame resistance of polypyrrole-coated PET fibres , 2008 .
[38] Dieter Fischer,et al. Effect of Carboxy-Functionalized Multiwall Nanotubes (MWNT-COOH) on the Crystallization and Chain Conformations of Poly(ethylene terephthalate) PET in PET-MWNT Nanocomposites , 2006 .
[39] K. Koumoto,et al. Room temperature deposition of a TiO2 thin film from aqueous peroxotitanate solution , 2003 .
[40] N. Bhat,et al. X-ray crystallographic studies of polymeric materials , 2002 .
[41] K. Cholewa-Kowalska,et al. Organic–inorganic hybrid glasses of selective optical transmission , 2001 .
[42] Tadashi Inoue,et al. Effects of Wavelength on Strain-Induced Birefringence of Polymers , 1998 .
[43] Craig M. Herzinger,et al. Characterization of biaxially-stretched plastic films by generalized ellipsometry , 1998 .
[44] V. Siracusa,et al. High-resolution X-ray photoelectron spectroscopy of crystalline and amorphous poly(ethylene terephthalate): a study of biaxially oriented film, spin cast film and polymer melt , 1996 .
[45] P. Rouxhet,et al. Analysis of Poly(Ethylene Terephthalate) (PET) by XPS , 1994 .
[46] V. Deshpande,et al. Comparison of crystallization kinetics of polyethylene terephthalate (PET) and reorganized PET , 2020 .
[47] P. Olivier,et al. Correlation between degree of crystallinity, morphology and mechanical properties of PPS/carbon fiber laminates , 2016 .
[48] E. Bourhis,et al. Enhanced mechanical properties in organofluorosilica thin films , 2008 .
[49] H. Estrade-szwarckopf. XPS photoemission in carbonaceous materials: A “defect” peak beside the graphitic asymmetric peak , 2004 .
[50] G. Botelho,et al. Studies on thermal and thermo-oxidative degradation of poly(ethylene terephthalate) and poly(butylene terephthalate) , 2001 .