Drop formation from a wettable nozzle

Abstract The process of drop formation from a nozzle can be seen in many natural systems and engineering applications. However, previous research focuses on the pinch-off mechanism of drops from a non-wettable nozzle. Here we investigate the formation of a liquid droplet from a wettable nozzle. In the experiments, drops forming from a wettable nozzle initially climb the outer walls of the nozzle due to surface tension. Then, when the weight of the drops gradually increases, they eventually fall due to gravity. By changing the parameters such as the nozzle size and fluid flow rate, we have observed different behaviors of the droplets. Such oscillatory behavior is characterized by an equation that consists of capillary force, viscous drag, and gravity. Two asymptotic solutions in the initial and later stages of drop formation are obtained and show good agreement with the experimental observations.

[1]  Richard Lucas,et al.  Ueber das Zeitgesetz des kapillaren Aufstiegs von Flüssigkeiten , 1918 .

[2]  Hans J. Rath,et al.  Capillary driven flow in circular cylindrical tubes , 2003 .

[3]  D. Bogy.  Drop Formation in a Circular Liquid Jet , 1979 .

[4]  P. Taborek,et al.  Scaling and instabilities in bubble pinch-off. , 2005, Physical review letters.

[5]  Alberto Fernandez-Nieves,et al.  Absolute instability of a liquid jet in a coflowing stream. , 2008, Physical review letters.

[6]  Christophe Clanet,et al.  Transition from dripping to jetting , 1999, Journal of Fluid Mechanics.

[7]  Osman A. Basaran,et al.  Small‐scale free surface flows with breakup: Drop formation and emerging applications , 2002 .

[8]  S. Quake,et al.  Dynamic pattern formation in a vesicle-generating microfluidic device. , 2001, Physical review letters.

[9]  Scott D. Phillips,et al.  Computational and experimental analysis of dynamics of drop formation , 1999 .

[10]  J. Gordillo,et al.  Generation and breakup of Worthington jets after cavity collapse. Part 2. Tip breakup of stretched jets , 2010, Journal of Fluid Mechanics.

[11]  D. Lohse,et al.  Approach to universality in axisymmetric bubble pinch-off. , 2009, Physical review. E, Statistical, nonlinear, and soft matter physics.

[12]  L. Rayleigh.  On The Instability Of Jets , 1878 .

[13]  Alfonso M. Gañán-Calvo,et al.  Generation of Steady Liquid Microthreads and Micron-Sized Monodisperse Sprays in Gas Streams , 1998 .

[14]  S. Wilson,et al.  The slow dripping of a viscous fluid , 1988, Journal of Fluid Mechanics.

[15]  Wetting controls separation of inertial flows from solid surfaces. , 2010, Physical review letters.

[16]  R. Reitz,et al.  MODELING SPRAY ATOMIZATION WITH THE KELVIN-HELMHOLTZ/RAYLEIGH-TAYLOR HYBRID MODEL , 1999 .

[17]  T. Tate Esq.,et al.  XXX. On the magnitude of a drop of liquid formed under different circumstances , 1864 .

[18]  Ian M. Hutchings,et al.  Direct Writing Technology Advances and Developments , 2008 .

[19]  Zhmud,et al.  Dynamics of Capillary Rise. , 2000, Journal of colloid and interface science.

[20]  A. Gañán-Calvo.  Jetting–dripping transition of a liquid jet in a lower viscosity co-flowing immiscible liquid: the minimum flow rate in flow focusing , 2006, Journal of Fluid Mechanics.

[21]  E. W. Washburn.  The Dynamics of Capillary Flow , 1921 .

[22]  Markus Reiner.  The teapot effect…a problem , 1956 .