Experimental investigation on residual stress distribution in an austenitic stainless steel weld overlay pipe after local ultrasonic impact treatment

[1]  Xin Lv,et al.  Microstructure investigation on the fusion zone of steel/nickel-alloy dissimilar weld joint for nozzle buttering in nuclear power industry , 2021, Welding in the World.

[2]  Guoqing Wang,et al.  Radial expansion approach and its mechanism to reduce residual stress and distortion of girth joint structure , 2021, Journal of Manufacturing Processes.

[3]  Chuan Liu,et al.  Effects of local ultrasonic impact treatment on residual stress in an engineering-scale stainless steel pipe girth weld , 2021 .

[4]  Ru-Feng Liu,et al.  Finite element analyses of the effect of weld overlay sizing on residual stresses of the dissimilar metal weld in PWRs , 2021 .

[5]  Chuan Liu,et al.  Effects of initial stress state on the subsurface stress distribution after ultrasonic impact treatment on thick specimens , 2020 .

[6]  Chuan Liu,et al.  Experimental investigation on residual stress distribution in an engineering-scale pipe girth weld , 2020, Science and Technology of Welding and Joining.

[7]  Jialing Yan,et al.  Experimental Investigations on Welding Stress Distribution in Thick Specimens After Postweld Heat Treatment and Ultrasonic Impact Treatment , 2020, Journal of Materials Engineering and Performance.

[8]  H. Shimanuki,et al.  Influence of cyclic loading on the relaxation behavior of compressive residual stress induced by UIT , 2019, Welding in the World.

[9]  O. Muránsky,et al.  Validated prediction of weld residual stresses in austenitic steel pipe girth welds before and after thermal ageing, part 2: Modelling and validation , 2019, International Journal of Pressure Vessels and Piping.

[10]  P. Bouchard,et al.  Validated prediction of weld residual stresses in austenitic steel pipe girth welds before and after thermal ageing, part 1: Mock-up manufacture, residual stress measurements, and materials characterisation , 2019, International Journal of Pressure Vessels and Piping.

[11]  M. R. Hill,et al.  Validation of a Contour Method Single-Measurement Uncertainty Estimator , 2018 .

[12]  P. J. Bouchard,et al.  Through-Thickness Residual Stress Profiles in Austenitic Stainless Steel Welds: A Combined Experimental and Prediction Study , 2017, Metallurgical and Materials Transactions A.

[13]  C. Hamelin,et al.  Investigating optimal cutting configurations for the contour method of weld residual stress measurement , 2017, International Journal of Pressure Vessels and Piping.

[14]  M. Smith,et al.  Residual stress analysis in linear friction welded in-service Inconel 718 superalloy via neutron diffraction and contour method approaches , 2017 .

[15]  M. Prime,et al.  Mitigating Cutting-Induced Plasticity in the Contour Method, Part 2: Numerical Analysis , 2016 .

[16]  Hidekazu Murakawa,et al.  Prediction of residual stresses induced by low transformation temperature weld wires and its validation using the contour method , 2015 .

[17]  E. Sinyakova,et al.  Mechanisms of surface roughening of commercial purity titanium during ultrasonic impact treatment , 2015 .

[18]  M. R. Hill,et al.  Estimation of Uncertainty for Contour Method Residual Stress Measurements , 2015 .

[19]  Pingsha Dong,et al.  A full-field residual stress estimation scheme for fitness-for-service assessment of pipe girth welds: Part I - Identification of key parameters , 2015 .

[20]  Paul A. Colegrove,et al.  Assessment of residual stress of welded structural steel plates with or without post weld rolling using the contour method and neutron diffraction , 2013 .

[21]  D. Smith,et al.  Through-thickness distributions of residual stresses in two extreme heat-input thick welds: A neutron diffraction, contour method and deep hole drilling study , 2013 .

[22]  Chin-Cheng Huang,et al.  Welding residual stress analysis for weld overlay on a BWR feedwater nozzle , 2013 .

[23]  P. J. Bouchard,et al.  Mapping Multiple Components of the Residual Stress Tensor in a Large P91 Steel Pipe Girth Weld Using a Single Contour Cut , 2013 .

[24]  Tao Zhang,et al.  Weld Residual Stress Analysis and the Effects of Structural Overlay on Various Nuclear Power Plant Nozzles , 2012 .

[25]  Alfredo A. Betervide,et al.  Welding Residual Stress in a Large Diameter Nuclear Reactor Pressure Vessel Nozzle , 2012 .

[26]  Chin-Cheng Huang,et al.  Structural integrity analyses for preemptive weld overlay on the dissimilar metal weld of a pressurizer nozzle , 2012 .

[27]  P. J. Bouchard,et al.  Slitting and Contour Method Residual Stress Measurements in an Edge Welded Beam , 2012 .

[28]  W. Woo,et al.  Residual stress determination in a dissimilar weld overlay pipe by neutron diffraction , 2011 .

[29]  Marc Thomas,et al.  Residual stress characterization in low transformation temperature 13%Cr-4%Ni stainless steel weld by neutron diffraction and the contour method , 2010 .

[30]  I. Rivero,et al.  An investigation of the residual stress characterization and relaxation in peened friction stir welded aluminum–lithium alloy joints , 2009 .

[31]  Raynald Simoneau,et al.  A Comparison of Residual Stress in Hammer-Peened, Multi-Pass Steel Welds–A514 (S690Q) and S41500 , 2009 .

[32]  M. Preuss,et al.  Comparison of residual stresses in Ti–6Al–4V and Ti–6Al–2Sn–4Zr–2Mo linear friction welds , 2009 .

[33]  H. F. Nied,et al.  Residual Stresses and Distortion in Boiler Tube Panels With Welded Overlay Cladding , 2004 .

[34]  Michael B. Prime,et al.  Quenching and Cold-Work Residual Stresses in Aluminum Hand Forgings: Contour Method Measurement and FEM Prediction , 2003 .

[35]  Michael B. Prime,et al.  Mapping Residual Stresses after Foreign Object Damage Using the Contour Method , 2002 .

[36]  M. Prime.  Cross-sectional mapping of residual stresses by measuring the surface contour after a cut , 2001 .

[37]  H. J. Yen,et al.  Measurement of residual stress in the weld overlay piping components , 1995 .

[38]  G. An,et al.  Through-thickness distributions of residual stresses in an 80 mm thick weld using neutron diffraction and contour method , 2014, Journal of Materials Science.

[39]  Brian Vilhauer,et al.  Fatigue behavior of welded coverplates treated with Ultrasonic Impact Treatment and bolting , 2012 .

[40]  Frederick W. Brust,et al.  An Analytical Evaluation of the Full Structural Weld Overlay as a Stress Improving Mitigation Strategy to Prevent Primary Water Stress Corrosion Cracking in Pressurized Water Reactor Piping , 2009 .

[41]  M. Lin,et al.  Residual Stress Measurement in 304 Stainless Steel Weld Overlay Pipes , 1996 .