Reliability-based evaluation of the inherent safety presumptions in common fire safety design

Abstract The structural safety of a simply supported one-way concrete slab exposed to the ISO 834 standard fire curve is investigated. The proposed methodology allows for an objective comparison of the structural performance of different concrete slab design alternatives and to derive indirectly a lower bound of the fire ignition frequencies that can be associated to the Eurocode guidelines. A comparison is made with empirical fire ignition frequencies found in literature and a detailed study is presented of the significance of the concrete cover and its uncertainty on the safety level and fire resistance time. Results indicate that the safety level during fire and the fire resistance time are both highly sensitive to the ratio of the variable to the permanent load and that the accepted design solutions given in EN 1992-1-2 are rather conservative.

[1]  Henrik O. Madsen,et al.  Structural Reliability Methods , 1996 .

[2]  Dunaiski Pe,et al.  The reliability basis of design for structural resistance , 2007 .

[3]  Robby Caspeele,et al.  Global resistance factor for concrete slabs exposed to fire , 2012 .

[4]  Bernard Bourret,et al.  FIRE SAFETY OF REINFORCED CONCRETE COLUMNS , 2000 .

[6]  Robby Caspeele,et al.  The mixed lognormal distribution for a more precise assessment of the reliability of concrete slabs exposed to fire , 2014 .

[7]  Venkatesh Kodur,et al.  Hydrothermal model for predicting fire-induced spalling in concrete structural systems , 2009 .

[8]  Robby Caspeele,et al.  Towards a reliability‐based post‐fire assessment method for concrete slabs incorporating information from inspection , 2014 .

[9]  Christopher D. Eamon,et al.  Reliability Analysis of RC Beams Exposed to Fire , 2013 .

[10]  Pietro G. Gambarova,et al.  High-Performance Concrete in Fire-Exposed Reinforced Concrete Sections , 2002 .

[11]  Ann E. Jeffers,et al.  Probabilistic Evaluation of Structural Fire Resistance , 2013 .

[12]  Monther B. Dwaikat,et al.  A numerical model for predicting the fire resistance of reinforced concrete beams , 2008 .

[13]  M. Holicky,et al.  Designer's guide to EN 1990 : Eurocode: Basis of Structural Design , 2002 .

[14]  E. G. Choi,et al.  The structural behavior and simplified thermal analysis of normal-strength and high-strength concrete beams under fire , 2011 .

[15]  Christoph Klinzmann,et al.  Probabilistische Bewertung von Stahlbetonbauteilen unter Naturbrandbeanspruchung , 2008 .

[16]  Christopher D. Eamon,et al.  Reliability analysis of prestressed concrete beams exposed to fire , 2012 .

[17]  Dietmar Hosser,et al.  A parametric natural fire model for the structural fire design of multi-storey buildings , 2007 .

[18]  Robby Caspeele,et al.  Full-Probabilistic Analysis of Concrete Beams During Fire , 2013 .

[19]  Robby Caspeele,et al.  Lifetime Cost Optimization for the Structural Fire Resistance of Concrete Slabs , 2014 .

[20]  Kristian Dahl Hertz,et al.  Limits of spalling of fire-exposed concrete , 2003 .

[21]  R. Torrent,et al.  The log-normal distribution: A better fitness for the results of mechanical testing of materials , 1978 .

[22]  Jean-Baptiste Schleich.  Structural innovation through active fire safety , 2014 .

[23]  J. Rahikainen,et al.  Statistical Determination of Ignition Frequency of Structural Fires in Different Premises in Finland , 2004 .

[24]  Darlene Rini,et al.  Recent Lessons Learned in Structural Fire Engineering for Composite Steel Structures , 2013 .

[25]  Paulo J. S. Cruz,et al.  Probabilistic models for mechanical properties of concrete, reinforcing steel and pre-stressing steel , 2012 .

[26]  Jana Marková,et al.  Target reliability levels for assessment of existing structures , 2012 .

[27]  Mohamed Saafi,et al.  Effect of fire on FRP reinforced concrete members , 2002 .

[28]  K. K. Yuen,et al.  THE DEVELOPMENT OF PERFORMANCE-BASED FIRE SAFETY ENGINEERING DESIGN IN HONG KONG AND JAPAN , 2009 .

[29]  Emmanuel Annerel.  Assessment of the Residual Strength of Concrete Structuresafter Fire Exposure. , 2010 .

[30]  R. Rackwitz.  Reliability analysis—a review and some perspectives , 2001 .

[31]  Zhenqing Wang,et al.  The Reliability Analysis of Reinforced Concrete Beams under High Temperature , 2010, 2010 Third International Joint Conference on Computational Science and Optimization.

[32]  X. Zha,et al.  Three-dimensional non-linear analysis of reinforced concrete members in fire , 2003 .

[33]  Kent Gylltoft,et al.  Safety formats for nonlinear analysis tested on concrete beams subjected to shear forces and bending moments , 2011 .

[34]  C. R. Barnett,et al.  BFD curve: a new empirical model for fire compartment temperatures , 2002 .

[35]  Ricardo Hallal Fakury,et al.  Interaction diagrams for reinforced concrete sections subjected to fire , 2010 .

[36]  Robby Caspeele,et al.  Quantifying the filtering effect of conformity inspection on the reliability of reinforced concrete structures , 2010 .

[37]  Ton Vrouwenvelder,et al.  Assessment Criteria for Existing Structures , 2010 .