Evaluation of ejector performance for an organic Rankine cycle combined power and cooling system

Power-generation systems based on organic Rankine cycles (ORCs) are well suited and increasingly employed in the conversion of thermal energy from low temperature heat sources to power. These systems can be driven by waste heat, for example from various industrial processes, as well as solar or geothermal energy. A useful extension of such systems involves a combined ORC and ejector-refrigeration cycle (EORC) that is capable, at low cost and complexity, of producing useful power while having a simultaneous capacity for cooling that is highly desirable in many applications. A significant thermodynamic loss in such a combined energy system takes place in the ejector due to unavoidable losses caused by irreversible mixing in this component. This paper focuses on the flow and transport processes in an ejector, in order to understand and quantify the underlying reasons for these losses, as well as their sensitivity to important design parameters and operational variables. Specifically, the study considers, beyond variations to the geometric design of the ejector, also the role of changing the external conditions across this component and how these affect its performance; this is not only important in helping develop ejector designs in the first instance, but also in evaluating how the performance may shift (in fact, deteriorate) quantitatively when the device (and wider energy system within which it functions) are operated at part load, away from their design/operating points. An appreciation of the loss mechanisms and how these vary can be harnessed to propose new and improved designs leading to more efficient EROC systems, which would greatly enhance this technology’s economic and environmental potential. It is found that some operating conditions, such as a high pressure of the secondary and discharge fluid, lead to higher energy losses inside the ejector and limit the performance of the entire system. Based on the ejector model, an optimal design featuring a smoothed nozzle edge and an improved nozzle position is found to achieve an improved entrainment ratio, significantly better performance and reduced energy losses in the ejector.

[1]  Christos N. Markides,et al.  Low-Concentration Solar-Power Systems Based on Organic Rankine Cycles for Distributed-Scale Applications: Overview and Further Developments , 2015, Front. Energy Res..

[2]  D. Yogi Goswami,et al.  Analysis of a New Thermodynamic Cycle for Combined Power and Cooling Using Low and Mid Temperature Solar Collectors , 1999 .

[3]  Christos N. Markides,et al.  On the use of SAFT-VR Mie for assessing large-glide fluorocarbon working-fluid mixtures in organic rankine cycles , 2016 .

[4]  Christos N. Markides,et al.  The role of pumped and waste heat technologies in a high-efficiency sustainable energy future for the UK , 2013 .

[5]  G. K. Alexis,et al.  Investigation of ejector design at optimum operating condition , 2000 .

[6]  Santanu Bandyopadhyay,et al.  Process integration of organic Rankine cycle , 2009 .

[7]  Christos N. Markides,et al.  AN ASSESSMENT OF WORKING-FLUID MIXTURES USING SAFT-VR MIE FOR USE IN ORGANIC RANKINE CYCLE SYSTEMS FOR WASTE-HEAT RECOVERY , 2014 .

[8]  Saffa Riffat,et al.  A combined heat and power system for buildings driven by solar energy and gas , 2002 .

[9]  Thanarath Sriveerakul,et al.  CFD simulation on the effect of primary nozzle geometries for a steam ejector in refrigeration cycle , 2013 .

[10]  J. Keenan,et al.  An Investigation of Ejector Design by Analysis and Experiment , 1950 .

[11]  G. K. Alexis,et al.  Estimation of ejector's main cross sections in steam-ejector refrigeration system , 2004 .

[12]  Hailong Li,et al.  Theoretical analysis of a combined power and ejector refrigeration cycle using zeotropic mixture , 2015 .

[13]  Yiping Dai,et al.  A theoretical study on a novel combined power and ejector refrigeration cycle , 2009 .

[14]  Kamaruzzaman Sopian,et al.  Review on solar-driven ejector refrigeration technologies , 2009 .

[15]  Fereshteh Aramoun,et al.  Energy and exergy assessments of modified Organic Rankine Cycles (ORCs) , 2015 .

[16]  Yong Yang,et al.  Experimental Investigation of Adjustable Ejector Performance , 2012 .

[17]  A. Mani,et al.  Experimental investigations on ejector refrigeration system with ammonia , 2007 .

[18]  Saffa Riffat,et al.  Computational fluid dynamics applied to ejector heat pumps , 1996 .

[19]  D. Y. Goswami,et al.  Effectiveness of cooling production with a combined power and cooling thermodynamic cycle , 2006 .

[20]  D. Yogi Goswami,et al.  Analysis of a combined power and cooling cycle for low-grade heat sources , 2011 .

[21]  Costante Mario Invernizzi,et al.  Heat recovery from Diesel engines: A thermodynamic comparison between Kalina and ORC cycles , 2010 .

[22]  Christos N. Markides,et al.  An assessment of solar-powered organic Rankine cycle systems for combined heating and power in UK domestic applications , 2015 .

[23]  Da-Wen Sun,et al.  Performance characteristics of HCFC-123 ejector refrigeration cycles , 1996 .

[24]  Yiping Dai,et al.  Exergy analysis, parametric analysis and optimization for a novel combined power and ejector refrigeration cycle , 2009 .

[25]  Wenjian Cai,et al.  Shock circle model for ejector performance evaluation , 2007 .

[26]  Fateme Ahmadi Boyaghchi,et al.  Thermoeconomic assessment and multi objective optimization of a solar micro CCHP based on Organic Rankine Cycle for domestic application , 2015 .

[27]  Shenyi Wu,et al.  A novel absorption-recompression refrigeration cycle , 1998 .

[28]  Xinguo Li,et al.  The first and second law analysis on an organic Rankine cycle with ejector , 2013 .

[29]  Bin-Juine Huang,et al.  Ejector Performance Characteristics and Design Analysis of Jet Refrigeration System , 1985 .

[30]  Yann Bartosiewicz,et al.  Numerical and Experimental Investigations on Supersonic Ejectors , 2005 .

[31]  Satha Aphornratana,et al.  Ejectors: applications in refrigeration technology , 2004 .

[32]  Navid Sharifi,et al.  Reducing energy consumption of a steam ejector through experimental optimization of the nozzle geometry , 2014 .

[33]  Jianyong Chen,et al.  A review on versatile ejector applications in refrigeration systems , 2015 .

[34]  Masud Behnia,et al.  Investigation and improvement of ejector refrigeration system using computational fluid dynamics technique , 2007 .

[35]  Mohammad Mehdi Rashidi,et al.  Analysis of a combined power and ejector-refrigeration cycle using low temperature heat , 2013 .

[36]  Wenming Yang,et al.  Advances in heat pump systems: A review , 2010 .

[37]  Bogdan Diaconu,et al.  Influence of geometrical factors on steam ejector performance – A numerical assessment , 2009 .

[38]  Saffa Riffat,et al.  Recent developments in ejector refrigeration technologies , 2013 .

[39]  Changyun Wen,et al.  Numerical investigation of geometry parameters for design of high performance ejectors , 2009 .

[40]  Zine Aidoun,et al.  Optimum design of ejector refrigeration systems with environmentally benign fluids. , 2011 .

[41]  Ricardo Chacartegui,et al.  Part-load analysis of gas turbine & ORC combined cycles , 2012 .

[42]  Christos N. Markides,et al.  Working Fluid Selection and Electrical Performance Optimisation of a Domestic Solar-ORC Combined Heat and Power System for Year-Round Operation in the UK , 2017 .

[43]  Gunnar Tamm,et al.  Theoretical and experimental investigation of an ammonia–water power and refrigeration thermodynamic cycle , 2004 .

[44]  Bin-Juine Huang,et al.  A 1-D analysis of ejector performance , 1999 .

[45]  Jiangfeng Wang,et al.  Parametric optimization and comparative study of organic Rankine cycle (ORC) for low grade waste heat recovery , 2009 .

[46]  B. Zheng,et al.  A combined power and ejector refrigeration cycle for low temperature heat sources , 2010 .

[47]  Kun Zhang,et al.  Numerical investigation on performance of the adjustable ejector , 2010 .

[48]  Mohammad Mehdi Rashidi,et al.  First and second law analysis of an ejector expansion Joule–Thomson cryogenic refrigeration cycle , 2012 .

[49]  Adriano Milazzo,et al.  Performance analysis of a supersonic ejector cycle working with R245fa , 2015 .

[50]  Mortaza Yari,et al.  Thermodynamic analysis and optimization of a novel dual-evaporator system powered by electrical and solar energy sources , 2013 .