Enlarged finite strain modelling incorporating adiabatic shear banding and post-localization microvoiding as shear failure mechanisms

The adiabatic shear banding and its consequences are considered here as deterioration mechanisms incorporated in the dynamic plasticity modelling for high-strength metallic materials following earlier contributions of the present authors. A three-dimensional finite deformation model, starting from a specific scale postulate and devoted to cover a wide range of dissipative phenomena including adiabatic shear banding-related material instabilities, is further developed here. The developments concerned are based on recent experimental evidence and include explicitly post-localization void-sheet formation and growth in the wake of a band cluster. The model enlarged in this way allows for a more detailed description of a late pre-failure stage of shear-dominated deformation. Some model calibration and numerical implementation items are discussed.

[1]  J. Duffy,et al.  An experimental study of the formation process of adiabatic shear bands in a structural steel , 1988 .

[2]  A. Molinari.  Instabilité thermoviscoplastique en cisaillement simple , 1985 .

[3]  A. Huespe,et al.  From continuum mechanics to fracture mechanics: the strong discontinuity approach , 2002 .

[4]  R. Batra,et al.  Adiabatic shear banding in plane strain tensile deformations of 11 thermoelastoviscoplastic materials with finite thermal wave speed , 2005 .

[5]  T. Lodygowski,et al.  Localized Fracture in Inelastic Polycrystalline Solids under Dynamic Loading Processes , 1997 .

[6]  A. Needleman,et al.  Analysis of the cup-cone fracture in a round tensile bar , 1984 .

[7]  J. Petit,et al.  Analysis of ASB assisted failure in a high strength steel under high loading rate , 2015 .

[8]  George Z. Voyiadjis,et al.  A Finite Strain Plastic-damage Model for High Velocity Impacts using Combined Viscosity and Gradient Localization Limiters: Part II - Numerical Aspects and Simulations , 2006 .

[9]  J. H. Hollomon,et al.  Effect of Strain Rate Upon Plastic Flow of Steel , 1944 .

[10]  M. Dolinski,et al.  Modeling adiabatic shear failure from energy considerations , 2010 .

[11]  Jean-Baptiste Leblond,et al.  Recent extensions of Gurson's model for porous ductile metals , 1997 .

[12]  A. Dragon,et al.  Adiabatic Shear: Pre- and Post-critical Dynamic Plasticity Modelling and Study of Impact Penetration. Heat Generation in this Context , 2010 .

[13]  Marc A. Meyers,et al.  Evolution of microstructure and shear-band formation in α-hcp titanium , 1994 .

[14]  Thomas J. R. Hughes,et al.  A variational multiscale approach to strain localization – formulation for multidimensional problems , 2000 .

[15]  A. Gurson.  Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Media , 1977 .

[16]  A. Dragon,et al.  Modelling adiabatic shear banding via damage mechanics approach , 2003 .

[17]  H. Couque,et al.  A hydrodynamic hat specimen to investigate pressure and strain rate dependence on adiabatic shear band formation , 2003 .

[18]  A. Molinari.  Collective behavior and spacing of adiabatic shear bands , 1997 .

[19]  J. R. Klepaczko,et al.  Some results and new experimental technique in studies of adiabatic shear bands , 1994 .

[20]  Yi-long Bai,et al.  Adiabatic Shear Localization: Occurrence, Theories and Applications , 1992 .

[21]  A. Rosakis,et al.  Dynamically propagating shear bands in impact-loaded prenotched plates—II. Numerical simulations , 1996 .

[22]  D. Rittel.  Dynamic Shear Failure of Materials , 2009 .

[23]  Rashid K. Abu Al-Rub,et al.  A Finite Strain Plastic-damage Model for High Velocity Impact using Combined Viscosity and Gradient Localization Limiters: Part I - Theoretical Formulation , 2006 .

[24]  Yi-long Bai.  Thermo-plastic instability in simple shear , 1982 .

[25]  P. Perzyna.  Stability of flow processes for dissipative solids with internal imperfections , 1984 .

[26]  M.,et al.  DYNAMICALLY PROPAGATING SHEAR BANDS IN IMPACT-LOADED PRENOTCHED PLATES-II . NUMERICAL , 2003 .

[27]  Abdelwaheb Dogui,et al.  Some issues about anisotropic elastic-plastic models at finite strain , 2001 .

[28]  G. Rousselier,et al.  Ductile fracture models and their potential in local approach of fracture , 1987 .

[29]  A. Molinari,et al.  Analysis of the dynamic propagation of adiabatic shear bands , 2002 .

[30]  I. Sinclair,et al.  In situ 3-D observation of early strain localization during failure of thin Al alloy (2198) sheet , 2014 .

[31]  Patrice Longère,et al.  Adiabatic shear banding induced degradation in a thermo-elastic/viscoplastic material under dynamic loading , 2005 .

[32]  Patrice Longère,et al.  Numerical Study of Impact Penetration Shearing Employing Finite Strain Viscoplasticity Model Incorporating Adiabatic Shear Banding , 2009 .

[33]  R. Pęcherski,et al.  Macroscopic effects of micro-shear banding in plasticity of metals , 1998 .

[34]  Anthony N. Palazotto,et al.  Non-local coupling of viscoplasticity and anisotropic viscodamage for impact problems using the gradient theory , 2003 .

[35]  Alain Combescure,et al.  Damage model with delay effect Analytical and numerical studies of the evolution of the characteristic damage length , 2003 .

[36]  Tomasz Wierzbicki,et al.  On the transition from adiabatic shear banding to fracture , 2007 .

[37]  J. Duffy,et al.  On critical conditions for shear band formation at high strain rates , 1984 .

[38]  A. Dragon,et al.  Adiabatic heat evaluation for dynamic plastic localization , 2007 .

[39]  A. Dragon,et al.  Dynamic vs. quasi-static shear failure of high strength metallic alloys: Experimental issues , 2015 .

[40]  Ted Belytschko,et al.  Stability and error analysis for time integrators applied to strain-softening materials , 1995 .

[41]  G. Ravichandran,et al.  A shear-compression specimen for large strain testing , 2002 .