3D finite element prediction of chip flow, burr formation, and cutting forces in micro end-milling of aluminum 6061-T6

Predictive models for machining operations have been significantly improved through numerous methods in recent decades. This study proposed a 3D finite element modeling (3D FEM) approach for the micro end-milling of Al6061-T6. Finite element (FE) simulations were performed under different cutting conditions to obtain realistic numerical predictions of chip flow, burr formation, and cutting forces. FE modeling displayed notable advantages, such as capability to easily handle any type of tool geometry and any side effect on chip formation, including thermal aspect and material property changes. The proposed 3D FE model considers the effects of mill helix angle and cutting edge radius on the chip. The prediction capability of the FE model was validated by comparing numerical model and experimental test results. Burr dimension trends were correlated with force profile shapes. However, the FE predictions overestimated the real force magnitude. This overestimation indicates that the model requires further development.

[1]  N. Saheb,et al.  Wear and friction behavior of Al6061 alloy reinforced with carbon nanotubes , 2013 .

[2]  Tuğrul Özel,et al.  Experimental and finite element simulation based investigations on micro-milling Ti-6Al-4V titanium alloy: Effects of cBN coating on tool wear , 2013 .

[3]  Hyo-Chol Sin,et al.  A finite element analysis for the characteristics of temperature and stress in micro-machining considering the size effect , 1999 .

[4]  Massimiliano Annoni,et al.  Finite Element Simulation and Validation of Chip Formation and Cutting Forces in Dry and Cryogenic Cutting of Ti–6Al–4V☆ , 2015 .

[5]  Yingchun Liang,et al.  Tool edge radius effect on cutting temperature in micro-end-milling process , 2011 .

[6]  Tuğrul Özel,et al.  3-D finite element process simulation of micro-end milling Ti-6Al-4V titanium alloy: Experimental validations on chip flow and tool wear , 2015 .

[7]  Matthew A. Davies,et al.  Recent advances in modelling of metal machining processes , 2013 .

[8]  Alan Myers,et al.  Analysis of discrete time schemes for milling forces control under fractional order holds , 2013 .

[9]  Yang Jiang,et al.  Research on the modeling of burr formation process in micro-ball end milling operation on Ti–6Al–4V , 2012 .

[10]  Kui Liu,et al.  The effect of tool edge radius on the contact phenomenon of tool-based micromachining , 2008 .

[11]  Mohamed A. Elbestawi,et al.  Modelling the effects of tool-edge radius on residual stresses when orthogonal cutting AISI 316L , 2007 .

[12]  Xialin Man,et al.  Validation of Finite Element Cutting Force Prediction for End Milling , 2012 .

[13]  Quirico Semeraro,et al.  Calibration and Validation of a Mechanistic Micromilling Force Prediction Model , 2016 .

[14]  D. Agard,et al.  Microtubule nucleation by γ-tubulin complexes , 2011, Nature Reviews Molecular Cell Biology.

[15]  Yusuf Altintas,et al.  Prediction of micro-milling forces with finite element method , 2012 .

[16]  David Dornfeld,et al.  Effect of In-Plane Exit Angle and Rake Angles on Burr Height and Thickness in Face Milling Operation , 1999 .

[17]  Ibrahim N. Tansel,et al.  Modeling micro-end-milling operations. Part I: analytical cutting force model , 2000 .

[18]  Hongbing Wu,et al.  3D FEM simulation of milling process for titanium alloy Ti6Al4V , 2014 .

[19]  Svetan Ratchev,et al.  Modelling and simulation of micro-milling cutting forces , 2010 .

[20]  Sang-Gook Kim,et al.  Designing direct printing process for improved piezoelectric micro-devices , 2009 .

[21]  Richard E. DeVor,et al.  An Analytical Model for the Prediction of Minimum Chip Thickness in Micromachining , 2006 .

[22]  T. Özel,et al.  Investigations on the effects of friction modeling in finite element simulation of machining , 2010 .

[23]  S. Thibaud,et al.  3D FEM simulations of shoulder milling operations on a 304L stainless steel , 2012, Simul. Model. Pract. Theory.

[24]  Shreyes N. Melkote,et al.  Finite element analysis of the influence of tool edge radius on size effect in orthogonal micro-cutting process , 2007 .

[25]  Chengfeng Li,et al.  Development of meso-scale milling machine tool and its performance analysis , 2008 .

[26]  Tuğrul Özel,et al.  The influence of friction models on finite element simulations of machining , 2006 .

[27]  Tuğrul Özel,et al.  Process simulation using finite element method — prediction of cutting forces, tool stresses and temperatures in high-speed flat end milling , 2000 .

[28]  F. Girot,et al.  A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti–6Al–4V , 2008 .

[29]  Takahisa Masuzawa,et al.  State of the Art of Micromachining , 2000 .