Micromechanics-based model for trends in toughness of ductile metals

[1]  A. A. Benzerga.  Micromechanics of coalescence in ductile fracture , 2002 .

[2]  R. H. Dodds,et al.  Simulation of ductile crack growth in thin aluminum panels using 3-D surface cohesive elements , 2001 .

[3]  D. Dumont.  Relations microstructure - ténacité dans les alliages aéronautiques de la série 7000 , 2001 .

[4]  Jacques Besson,et al.  Ductile tearing of pipeline-steel wide plates: II. Modeling of in-plane crack propagation , 2001 .

[5]  Thomas Pardoen,et al.  An extended model for void growth and coalescence - application to anisotropic ductile fracture , 2000 .

[6]  Jacques Besson,et al.  Modeling of scatter and size effect in ductile fracture: application to thermal embrittlement of duplex stainless steels , 2000 .

[7]  T. Siegmund,et al.  A numerical study on the correlation between the work of separation and the dissipation rate in ductile fracture , 2000 .

[8]  Christian Thaulow,et al.  A complete Gurson model approach for ductile fracture , 2000 .

[9]  T. Siegmund,et al.  Micromechanical modeling of damage due to particle cracking in reinforced metals , 1999 .

[10]  T. Siegmund,et al.  Prediction of the Work of Separation and Implications to Modeling , 1999 .

[11]  A. Pineau,et al.  Coalescence-Controlled Anisotropic Ductile Fracture , 1999 .

[12]  Y. Mai,et al.  Effect of constraint on void growth near a blunt crack tip , 1998 .

[13]  Robert H. Dodds,et al.  Ductile tearing in part-through cracks: experiments and cell-model predictions , 1998 .

[14]  F. Delannay,et al.  Experimental and numerical comparison of void growth models and void coalescence criteria for the prediction of ductile fracture in copper bars , 1998 .

[15]  Siegfried Schmauder,et al.  Comput. Mater. Sci. , 1998 .

[16]  Jacques Besson,et al.  Size and geometry effects on ductile rupture of notched bars in a C-Mn steel: experiments and modelling , 1997 .

[17]  Jonas Faleskog,et al.  Micromechanics of coalescence—I. Synergistic effects of elasticity, plastic yielding and multi-size-scale voids , 1997 .

[18]  R. Narasimhan,et al.  Numerical simulations of hole growth and ductile fracture initiation under mixed-mode loading , 1996 .

[19]  Viggo Tvergaard,et al.  Effect of strain-dependent cohesive zone model on predictions of crack growth resistance , 1996 .

[20]  Viggo Tvergaard,et al.  Constraint effects on the ductile-brittle transition in small scale yielding , 1996 .

[21]  Claudio Ruggieri,et al.  Numerical modeling of ductile crack growth in 3-D using computational cell elements , 1996 .

[22]  Laurent Bauvineau,et al.  Approche locale de la rupture ductile : application à un acier carbone-manganèse , 1996 .

[23]  A. Bakker.  Mechanical Behaviour of Materials , 1995 .

[24]  John W. Hutchinson,et al.  A computational approach to ductile crack growth under large scale yielding conditions , 1995 .

[25]  C. Shih,et al.  Ductile crack growth-I. A numerical study using computational cells with microstructurally-based length scales , 1995 .

[26]  David J. Smith,et al.  Constraint Effects in Fracture : Theory and Applications ASTM STP 1244 , 1995 .

[27]  Ian C. Howard,et al.  PREDICTION OF THE FIRST SPINNING CYLINDER TEST USING DUCTILE DAMAGE THEORY , 1993 .

[28]  J. Hutchinson,et al.  The relation between crack growth resistance and fracture process parameters in elastic-plastic solids , 1992 .

[29]  Viggo Tvergaard,et al.  Effect of crack meandering on dynamic, ductile fracture , 1992 .

[30]  K. S. Raghavan,et al.  A comparison of the fracture behavior of two commercially produced heats of HY180 steel differing in sulfide type , 1991 .

[31]  P. Thomason,et al.  Ductile Fracture of Metals , 1990 .

[32]  J. Embury,et al.  On the development of a metallographic method to determine the strain distribution ahead of a crack tip , 1989 .

[33]  R. McMeeking,et al.  Three-dimensional void growth before a blunting crack tip , 1989 .

[34]  Owen Richmond,et al.  The effect of void shape on the development of damage and fracture in plane-strain tension , 1989 .

[35]  V. Tvergaard.  Material Failure by Void Growth to Coalescence , 1989 .

[36]  A. Saxena,et al.  Nonlinear Fracture Mechanics: Volume II Elastic-Plastic Fracture , 1988 .

[37]  N. Aravas.  On the numerical integration of a class of pressure-dependent plasticity models , 1987 .

[38]  R. Becker.  The effect of porosity distribution on ductile failure , 1987 .

[39]  Viggo Tvergaard,et al.  An analysis of ductile rupture modes at a crack tip , 1987 .

[40]  R. E. Smelser,et al.  The influence of porosity on the deformation and fracture of alloys , 1986 .

[41]  N. Aravas,et al.  FINITE ELEMENT ANALYSIS OF VOID GROWTH NEAR A BLUNTING CRACK TIP , 1985 .

[42]  Robert O. Ritchie,et al.  On macroscopic and microscopic analyses for crack initiation and crack growth toughness in ductile alloys , 1985 .

[43]  J. Hutchinson.  Fundamentals of the Phenomenological Theory of Nonlinear Fracture Mechanics , 1983 .

[44]  A. Gurson.  Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Media , 1977 .

[45]  M. F. Kanninen,et al.  Inelastic Behavior of Solids , 1970, Science.