A flume study on the development and equilibrium morphology of current ripples in very fine sand

An empirical model is constructed for the development and equilibrium dimensions of small scale, unidirectional bedforms in sand with a median grain size of 0·095 mm, based on a series of steady flow experiments in a flume. Current ripples always attain a linguoid plan morphology with constant average height (13·1 mm) and wavelength (115·7 mm), provided that sufficient time is allowed for their formation. The development pattern of these ripples on a flat bed is independent of flow velocity, and involves four stages: (1) incipient ripples; (2) straight and sinuous ripples; (3) non-equilibrium linguoid ripples, and (4) equilibrium linguoid ripples. Straight and sinuous ripples are non-equilibrium bedforms at all flow velocities. The time needed to reach equilibrium dimensions is related to the inverse power of flow velocity and ranges from several minutes to more than hundreds of hours. At flow velocities where washed ripples are stable, the equilibrium wavelength is similar to that of equilibrium linguoid ripples, but the equilibrium height rapidly decreases from 13·1 mm to zero towards upper stage plane bed conditions. The results of the flume experiments correspond reasonably well with those of previous studies, provided that various complicating factors, such as different experimental methods, different sediment characteristics, shallow flow depths and non-equilibrium runs, are accounted for.

[1]  John F. Kennedy,et al.  The spectral evolution of sedimentary bed forms , 1974, Journal of Fluid Mechanics.

[2]  J. Allen.  Computational models for dune time-lag: General ideas, difficulties, and early results , 1976 .

[3]  M. Yalin.  On the Determination of Ripple Geometry , 1985 .

[4]  A. I. Rees.  SOME FLUME EXPERIMENTS WITH A FINE SILT , 1966 .

[5]  Kelvin J. Richards,et al.  The formation of ripples and dunes on an erodible bed , 1980, Journal of Fluid Mechanics.

[6]  H. Reineck,et al.  Depositional sedimentary environments , 1973 .

[7]  D. Marquardt.  An Algorithm for Least-Squares Estimation of Nonlinear Parameters , 1963 .

[8]  D. Forbes,et al.  FLUME STUDY OF SILT TRANSPORTATION AND DEPOSITION , 1979 .

[9]  Pa Mantz,et al.  SEMI-EMPIRICAL CORRELATIONS FOR FINE AND COARSE COHESIONLESS SEDIMENT TRANSPORT. , 1983 .

[10]  J. C. Harms.  Hydraulic Significance of Some Sand Ripples , 1969 .

[11]  Van Rijn,et al.  Closure of "Sediment Transport, Part III: Bed Forms and Alluvial Roughness" , 1984 .

[12]  J. Southard,et al.  Bed Configurations in Steady Unidirectional Water Flows. Part 3. Effects of Temperature and Gravity , 1990 .

[13]  J. R. Allen.  Phase differences between bed configuration and flow in natural environments, and their geological relevance , 1973 .

[14]  J. Best,et al.  Flow, sediment transport and bedform dynamics over the transition from dunes to upper‐stage plane beds: implications for the formation of planar laminae , 1988 .

[15]  J. Southard,et al.  Bed configuration in steady unidirectional water flows; Part 2, Synthesis of flume data , 1990 .

[16]  A. J. Raudkivi,et al.  Development of Bed Features , 1990 .

[17]  A. J. Moss.  BED‐LOAD SEDIMENTS , 1972 .

[18]  J. C. Harms.  Primary Sedimentary Structures , 1979 .

[19]  Martin C. Miller,et al.  Threshold of sediment motion under unidirectional currents , 1977 .

[20]  J. R. Allen.  Features of cross‐stratified units due to random and other changes in bed forms , 1973 .