Lithography-free high-resolution organic transistor arrays on polymer substrate by low energy selective laser ablation of inkjet-printed nanoparticle film

Inkjet direct writing of functional materials provides a promising pathway towards realization of ultra-low-cost, large-area printed electronics, albeit at the expense of lowered resolution (∼20–50 μm). We demonstrate that selective laser sintering and ablation of inkjet-printed metal nanoparticles enables low-temperature metal deposition as well as high-resolution patterning. Combined with an air-stable carboxylate-functionalized polythiophene, all-inkjet-printed and laser-processed organic field effect transistors with micron to submicron critical feature resolution were fabricated in a fully maskless sequence, eliminating the need for any lithographic processes. All processing and characterization steps were carried out at plastic-compatible low temperatures and in air under ambient pressure.

[1]  C. Grigoropoulos,et al.  Air stable high resolution organic transistors by selective laser sintering of ink-jet printed metal nanoparticles , 2007 .

[2]  Ute Zschieschang,et al.  Flexible Organic Circuits with Printed Gate Electrodes , 2003 .

[3]  Robert F. Pierret,et al.  Semiconductor device fundamentals , 1996 .

[4]  H. Girault,et al.  Surface plasmon enhanced non-linear optical response of gold nanoparticles at the air/toluene interface , 1997 .

[5]  Costas P. Grigoropoulos,et al.  Conductor microstructures by laser curing of printed gold nanoparticle ink , 2004 .

[6]  Feng Gao,et al.  Large area, high resolution, dry printing of conducting polymers for organic electronics , 2003 .

[7]  Jean M. J. Fréchet,et al.  Synthesis, Characterization, and Field-Effect Transistor Performance of Carboxylate-Functionalized Polythiophenes with Increased Air Stability , 2005 .

[8]  Marc D. Porter,et al.  Alkanethiolate Gold Cluster Molecules with Core Diameters from 1.5 to 5.2 nm: Core and Monolayer Properties as a Function of Core Size , 1998 .

[9]  Henning Sirringhaus,et al.  Inkjet Printing of Functional Materials , 2003 .

[10]  H. Sirringhaus,et al.  High-Resolution Ink-Jet Printing of All-Polymer Transistor Circuits , 2000, Science.

[11]  Z. Kam,et al.  Absorption and Scattering of Light by Small Particles , 1998 .

[12]  Zhenan Bao,et al.  High-performance plastic transistors fabricated by printing techniques , 1997 .

[13]  Ute Zschieschang,et al.  High-mobility organic thin-film transistors based on α,α′-didecyloligothiophenes , 2003 .

[14]  Takao Someya,et al.  Nanoscale organic transistors that use source/drain electrodes supported by high resolution rubber stamps , 2003 .

[15]  Costas P. Grigoropoulos,et al.  Fabrication of multilayer passive and active electric components on polymer using inkjet printing and low temperature laser processing , 2007 .

[16]  John A Rogers,et al.  Soft, conformable electrical contacts for organic semiconductors: High-resolution plastic circuits by lamination , 2002, Proceedings of the National Academy of Sciences of the United States of America.

[17]  Costas P. Grigoropoulos,et al.  In-tandem deposition and sintering of printed gold nanoparticle inks induced by continuous Gaussian laser irradiation , 2004 .

[18]  C. Grigoropoulos,et al.  The coalescence of supported gold nanoparticles induced by nanosecond laser irradiation , 2007 .

[19]  I. Park,et al.  Nanoscale Patterning and Electronics on Flexible Substrate by Direct Nanoimprinting of Metallic Nanoparticles , 2007 .

[20]  C. Grigoropoulos,et al.  Damage-free low temperature pulsed laser printing of gold nanoinks on polymers , 2005 .

[21]  Russell Chung,et al.  Direct writing of electronic and sensor materials using a laser transfer technique , 2000 .

[22]  R. Wallace,et al.  Gate induced leakage and drain current offset in organic thin film transistors , 2006 .

[23]  Richard H. Friend,et al.  Close look at charge carrier injection in polymer field-effect transistors , 2003 .

[24]  H W Li,et al.  Dewetting of conducting polymer inkjet droplets on patterned surfaces , 2004, Nature materials.

[25]  David J. Hwang,et al.  Nanosecond laser ablation of gold nanoparticle films , 2006 .

[26]  K. Venkatakrishnan,et al.  Selective surface texturing using femtosecond pulsed laser induced forward transfer , 2003 .

[27]  I. Park,et al.  Direct nanoimprinting of metal nanoparticles for nanoscale electronics fabrication. , 2007, Nano letters.

[28]  C. Grigoropoulos,et al.  All-inkjet-printed flexible electronics fabrication on a polymer substrate by low-temperature high-resolution selective laser sintering of metal nanoparticles , 2007 .

[29]  Ping Liu,et al.  High‐Performance Organic Thin‐Film Transistors with Solution‐Printed Gold Contacts , 2005 .

[30]  P. Buffat,et al.  Size effect on the melting temperature of gold particles , 1976 .

[31]  D. Bäuerle.  Laser Processing and Chemistry , 1996 .

[32]  A. Yassar,et al.  All-Polymer Field-Effect Transistor Realized by Printing Techniques , 1994, Science.

[33]  H. Sirringhaus,et al.  Self-Aligned, Vertical-Channel, Polymer Field-Effect Transistors , 2003, Science.