Modeling and design of flexure hinge-based compliant mechanisms

A compliant mechanism gains its mobility fully or partially from the compliance of its elastically deformable parts rather than from conventional joints. Due to many advantages, in particular the smooth and repeatable motion, monolithic mechanisms with notch flexure hinges are state of the art in numerous precision engineering applications with required positioning accuracies in the low micrometer range. However, the deformation and especially motion behavior are complex and depend on the notch geometry. This complicates both the accurate modeling and purposeful design. Therefore, the chapter provides a survey of different methods for the general and simplified modeling of the elasto-kinematic properties of flexure hinges and compliant mechanisms for four hinge contours. Based on non-linear analytical calculations and FEM simulations, several guidelines like design graphs, design equations, design tools or a geometric scaling approach are presented. The obtained results are analytically and simulatively verified and show a good correlation. Using the example of a path-generating mechanism, it will be demonstrated that the suggested angle-based method for synthesizing a compliant mechanism with individually shaped hinges can be used to design high-precise and large-stroke compliant mechanisms. The approaches can be used for the accelerated synthesis of planar and spatial flexure hinge-based compliant mechanisms.

[1]  Mary Frecker,et al.  Topological synthesis of compliant mechanisms using multi-criteria optimization , 1997 .

[2]  Chien‐Jong Shih,et al.  Multiobjective design optimization of flexure hinges for enhancing the performance of micro‐compliant mechanisms , 2005 .

[3]  Larry L. Howell,et al.  The modeling of cross-axis flexural pivots , 2002 .

[4]  Nenad D. Pavlović,et al.  Synthesis of Compliant Mechanisms based on Goal-Oriented Design Guidelines for Prismatic Flexure Hinges with Polynomial Contours , 2015 .

[5]  René Theska,et al.  On the influence of the flexure hinge orientation in planar compliant mechanisms for ultra-precision applications , 2017 .

[6]  L. Zentner,et al.  On Modeling the Bending Stiffness of Thin Semi-Circular Flexure Hinges for Precision Applications , 2018, Actuators.

[7]  Vincenzo Parenti-Castelli,et al.  A novel technique for position analysis of planar compliant mechanisms , 2005 .

[8]  J. Paros.  How to design flexure hinges , 1965 .

[9]  Larry L. Howell,et al.  Handbook of Compliant Mechanisms: Howell/Handbook , 2013 .

[10]  Bi Shusheng,et al.  Dimensionless design graphs for three types of annulus-shaped flexure hinges , 2010 .

[11]  Lena Zentner,et al.  General design equations for the rotational stiffness, maximal angular deflection and rotational precision of various notch flexure hinges , 2017 .

[12]  L. F. Campanile,et al.  A simple and effective solution of the elastica problem , 2008 .

[13]  Guangbo Hao,et al.  Compliance Synthesis of a Class of Planar Compliant Parallelogram Mechanisms Using the Position Space Concept , 2018, 2018 International Conference on Reconfigurable Mechanisms and Robots (ReMAR).

[14]  Lena Zentner,et al.  The influence of asymmetric flexure hinges on the axis of rotation , 2011 .

[15]  Qingsong Xu.  Design and Implementation of Large-Range Compliant Micropositioning Systems , 2016 .

[16]  Larry L. Howell,et al.  Handbook of compliant mechanisms , 2013 .

[17]  Tat Joo Teo,et al.  A large deflection and high payload flexure-based parallel manipulator for UV nanoimprint lithography: Part I. Modeling and analyses , 2014 .

[18]  B. Zettl,et al.  On Systematic Errors of Two-Dimensional Finite Element Modeling of Right Circular Planar Flexure Hinges , 2005 .

[19]  Lena Zentner,et al.  Compliant systems: Mechanics of elastically deformable mechanisms, actuators and sensors , 2019 .

[20]  Y. Tseytlin.  Notch flexure hinges: An effective theory , 2002 .

[21]  Pier Paolo Valentini,et al.  Elasto-kinematic comparison of flexure hinges undergoing large displacement , 2017 .

[22]  Dae-Gab Gweon,et al.  Error analysis of a flexure hinge mechanism induced by machining imperfection , 1997 .

[23]  Nenad D. Pavlović,et al.  Compliant mechanism design for realizing of axial link translation , 2009 .

[24]  Larry L. Howell,et al.  A Method for the Design of Compliant Mechanisms With Small-Length Flexural Pivots , 1994 .

[25]  Lena Zentner,et al.  Contour-independent design equations for the calculation of the rotational properties of commonly used and polynomial flexure hinges , 2017 .

[26]  Saša Zelenika,et al.  Optimized flexural hinge shapes for microsystems and high-precision applications , 2009 .

[27]  Rolf Lammering,et al.  On mechanical properties of planar flexure hinges of compliant mechanisms , 2011 .

[28]  Sameh H Tawfick,et al.  Compliant microgripper with parallel straight-line jaw trajectory for nanostructure manipulation , 2011 .

[29]  Simon Henein,et al.  FLEXURE PIVOT FOR AEROSPACE MECHANISMS , 2007 .

[30]  Qiaoling Meng.  A Design Method for Flexure-Based Compliant Mechanisms on the Basis of Stiffness and Stress Characteristics , 2012 .

[31]  Xianmin Zhang,et al.  Design of single-axis flexure hinges using continuum topology optimization method , 2014 .

[32]  Marco Ceccarelli,et al.  Design and Simulation of a Binary Actuated Parallel Micro-Manipulator , 2011 .

[33]  F. Cosandier,et al.  Development and integration of high straightness flexure guiding mechanisms dedicated to the METAS watt balance Mark II , 2014 .

[34]  Jaroslav Hricko.  Straight-Line Mechanisms as One Building Element of Small Precise Robotic Devices , 2014 .

[35]  Bijan Shirinzadeh,et al.  Design and analysis of a compact flexure-based precision pure rotation stage without actuator redundancy , 2016 .

[36]  Jonathan B. Hopkins,et al.  Corrigendum to Synthesis of multi-degree of freedom, parallel flexure system concepts via Freedom and Constraint Topology (FACT)—Part I: Principles , 2010 .

[37]  Tien-Fu Lu,et al.  Review of circular flexure hinge design equations and derivation of empirical formulations , 2008 .

[38]  Lena Zentner,et al.  Static behavior of weighing cells , 2018, Journal of Sensors and Sensor Systems.

[39]  Qingsong Xu,et al.  Design and analysis of a new compliant XY micropositioning stage based on Roberts mechanism , 2016 .

[40]  J. Haidl,et al.  Similitude of Scaled and Full Scale Linkages , 2018, EuCoMeS 2018.

[41]  Lena Zentner,et al.  Influence of geometric scaling on the elasto-kinematic properties of flexure hinges and compliant mechanisms , 2018, Mechanism and Machine Theory.

[42]  Nicolae Lobontiu,et al.  Compliant Mechanisms: Design of Flexure Hinges , 2002 .

[43]  Guimin Chen,et al.  A general approach for generating kinetostatic models for planar flexure-based compliant mechanisms using matrix representation , 2018 .

[44]  Lena Zentner,et al.  Optimization of Compliant Mechanisms by Use of Different Polynomial Flexure Hinge Contours , 2019 .

[45]  Lena Zentner,et al.  detasFLEX – A computational design tool for the analysis of various notch flexure hinges based on non-linear modeling , 2018 .