Microstructure-related properties of magnesium fluoride films at 193nm by oblique-angle deposition.

Magnesium fluoride (MgF2) films deposited by resistive heating evaporation with oblique-angle deposition have been investigated in details. The optical and micro-structural properties of single-layer MgF2 films were characterized by UV-VIS and FTIR spectrophotometers, scanning electron microscope (SEM), atomic force microscope (AFM), and x-ray diffraction (XRD), respectively. The dependences of the optical and micro-structural parameters of the thin films on the deposition angle were analyzed. It was found that the MgF2 film in a columnar microstructure was negatively inhomogeneous of refractive index and polycrystalline. As the deposition angle increased, the optical loss, extinction coefficient, root-mean-square (rms) roughness, dislocation density and columnar angle of the MgF2 films increased, while the refractive index, packing density and grain size decreased. Furthermore, IR absorption of the MgF2 films depended on the columnar structured growth.

[1]  I. Hodgkinson,et al.  Empirical equations for the principal refractive indices and column angle of obliquely deposited films of tantalum oxide, titanium oxide, and zirconium oxide. , 1998, Applied optics.

[2]  K. Nishimoto,et al.  Fluoride antireflection coatings for deep ultraviolet optics deposited by ion-beam sputtering. , 2006, Applied optics.

[3]  Tom J. Smy,et al.  Modelling and characterization of columnar growth in evaporated films , 1993 .

[4]  Cheng-Chung Lee,et al.  Microstructure of magnesium fluoride films deposited by boat evaporation at 193 nm. , 2006, Applied optics.

[5]  Leon Abelmann,et al.  Oblique evaporation and surface diffusion , 1997 .

[6]  M. Al-Kuhaili,et al.  Determination of the optical constants (n and k) of inhomogeneous thin films with linear index profiles. , 2006, Applied optics.

[7]  David H. Peterson,et al.  Deposition and characterization of challenging DUV coatings , 2008, Optical Engineering + Applications.

[8]  Hartmut Enkisch,et al.  Coatings for next generation lithography , 2008, Optical Systems Design.

[9]  Norbert Kaiser,et al.  Review of the fundamentals of thin-film growth. , 2002, Applied optics.

[10]  Dieter Gäbler,et al.  Metal fluoride coatings prepared by ion-assisted deposition , 2008, Optical Systems Design.

[11]  Bincheng Li,et al.  Simultaneous determination of optical constants, thickness, and surface roughness of thin film from spectrophotometric measurements. , 2013, Optics letters.

[12]  Akira Tanaka,et al.  Optical properties of fluoride thin films deposited by RF magnetron sputtering. , 2006, Applied optics.

[13]  H. Ishizawa,et al.  Investigations of MgF2 Optical Thin Films Prepared from Autoclaved Sol , 2004 .

[14]  S. Selvasekarapandian,et al.  Structural and impedance studies on LaF3 thin films prepared by vacuum evaporation , 2004 .

[15]  Cheng-Chung Lee,et al.  Residual stress in obliquely deposited MgF2 thin films. , 2008, Applied optics.

[16]  Horst Schreiber,et al.  Nanoporous structure of a GdF(3) thin film evaluated by variable angle spectroscopic ellipsometry. , 2007, Applied optics.

[17]  C K Carniglia,et al.  Single-layer model for surface roughness. , 2002, Applied optics.