Reinforcing Interlaminar Interface of Carbon Fiber Reinforced Metal Laminates by Graphene

[1]  Chandrakant R. Kini,et al.  Experimental and Numerical studies of Fiber Metal Laminates comprising Ballistic fabrics subjected to Shock Impact , 2022, Composite Structures.

[2]  Weifeng Su,et al.  Investigation on graphene addition on the quasi-static and dynamic responses of carbon fibre-reinforced metal laminates , 2022, Thin-Walled Structures.

[3]  C. Featherston,et al.  Predicting interlaminar damage behaviour of fibre-metal laminates containing adhesive joints under bending loads , 2021, Journal of Reinforced Plastics and Composites.

[4]  Ying Wu,et al.  Multiscale modelling of graphene sheet and its application in laminated composites , 2021 .

[5]  Ren Yi,et al.  Study on Formability and Failure Modes of Steel/CFRP based FMLs consisting of Carbon Fiber Reinforced Polymer Prepreg and Steel Sheet , 2021, Composite Structures.

[6]  Ans Al Rashid,et al.  Interlaminar shear strength (ILSS) characterization of fiber metal laminates (FMLs) manufactured through VARTM process , 2021 .

[7]  A. Mal,et al.  Determination of geometric role and damage assessment in hybrid fiber metal laminate (FML) joints based on acoustic emission , 2021 .

[8]  C. Macosko,et al.  Molecular Dynamics-Based Cohesive Law for Epoxy–Graphene Interfaces , 2021, Tribology Letters.

[9]  Xuming Zhang,et al.  Mechanically robust, highly sensitive and superior cycling performance nanocomposite strain sensors using 3-nm thick graphene platelets , 2021 .

[10]  Kai Jin,et al.  The effect of MWCNTs with different diameters on the interface properties of Ti/CFRP fiber metal laminates , 2021 .

[11]  Liqun Chen,et al.  Nonlinear vibration suppression of composite laminated beam embedded with NiTiNOL-steel wire ropes , 2021, Nonlinear Dynamics.

[12]  R. Eslami‐Farsani,et al.  The effect of graphene nanoplatelets on the flexural properties of fiber metal laminates under marine environmental conditions , 2020 .

[13]  Kai Jin,et al.  Improving the interfacial shear strength of carbon fibre and epoxy via mechanical interlocking effect , 2020, Composites Science and Technology.

[14]  L. Lang,et al.  Investigation into effect of the graphene oxide addition on the mechanical properties of the fiber metal laminates , 2020 .

[15]  A. Mouritz,et al.  Epoxy/graphene film for lifecycle self-sensing and multifunctional applications , 2020 .

[16]  J. Zhao,et al.  A comparative study on enhancement of mechanical and tribological properties of nitrile rubber composites reinforced by different functionalized graphene sheets: Molecular dynamics simulations , 2020 .

[17]  R. Eslami‐Farsani,et al.  Effect of graphene on the interfacial and mechanical properties of hybrid glass/Kevlar fiber metal laminates , 2020, Journal of Industrial Textiles.

[18]  C. Macosko,et al.  Molecular dynamics predictions of thermomechanical properties of an epoxy thermosetting polymer , 2020 .

[19]  Galen T Craven,et al.  Ex Machina Determination of Structural Correlation Functions. , 2020, The journal of physical chemistry letters.

[20]  B. Wang,et al.  Effect of different preparation methods on mechanical behaviors of carbon fiber-reinforced PEEK-Titanium hybrid laminates , 2020 .

[21]  A. Tcharkhtchi,et al.  The effect of multi-walled carbon nanotubes on the mechanical behavior of basalt fibers metal laminates: An experimental study , 2020 .

[22]  Yichun Wang,et al.  Research Progress on Interlaminar Failure Behavior of Fiber Metal Laminates , 2020 .

[23]  S. Saber-Samandari,et al.  Molecular dynamics simulations of the effect of temperature and strain rate on mechanical properties of graphene–epoxy nanocomposites , 2020, Molecular Simulation.

[24]  Xiongqi Peng,et al.  Synergy effects of multi-walled carbon nanotube and graphene nanoplate filled epoxy adhesive on the shear properties of unidirectional composite bonded joints , 2020 .

[25]  Y. Qiu,et al.  Interfacial characteristics of a carbon nanotube-polyimide nanocomposite by molecular dynamics simulation , 2020 .

[26]  Q. Meng,et al.  Mechanical, toughness and thermal properties of 2D material- reinforced epoxy composites , 2019, Polymer.

[27]  Y. Turen,et al.  The effect of GNP addition on mechanical and residual stress properties of 2024-T3 aluminum and carbon fiber reinforced FML , 2019, Materials Research Express.

[28]  R. Eslami‐Farsani,et al.  The effect of surface modified nanoclay on the interfacial and mechanical properties of basalt fiber metal laminates , 2019, Thin-Walled Structures.

[29]  Shuo Chen,et al.  Thermally and electrically conductive multifunctional sensor based on epoxy/graphene composite , 2019, Nanotechnology.

[30]  J. Tirillò,et al.  Effect of temperature and fiber type on impact behavior of thermoplastic fiber metal laminates , 2019, Composite Structures.

[31]  Kai Jin,et al.  Interface strengthening mechanisms of Ti/CFRP fiber metal laminate after adding MWCNTs to resin matrix , 2019, Composites Part B: Engineering.

[32]  Weicheng Jiao,et al.  Molecular dynamics simulations of the effect of sizing agent on the interface property in carbon fiber reinforced vinyl ester resin composite , 2019, Applied Surface Science.

[33]  G. Tsamasphyros,et al.  Simulation of Low Velocity Impact on CFRP Aerospace Structures: Simplified Approaches, Numerical and Experimental Results , 2019, Applied Composite Materials.

[34]  T. Mitsuoka,et al.  Wettability of Primer-Treated Al2O3 Surfaces by Bisphenol A Diglycidyl Ether: Determination of the Mechanism from Molecular Dynamics Simulations and Experiments. , 2019, The journal of physical chemistry. B.

[35]  Qingshi Meng,et al.  Mechanical and electrical properties of graphene and carbon nanotube reinforced epoxy adhesives: Experimental and numerical analysis , 2019, Composites Part A: Applied Science and Manufacturing.

[36]  S. Hong,et al.  Comparison to mechanical properties of epoxy nanocomposites reinforced by functionalized carbon nanotubes and graphene nanoplatelets , 2019, Composites Part B: Engineering.

[37]  T. Duguet,et al.  Model of the DGEBA-EDA Epoxy Polymer: Experiments and Simulation Using Classical Molecular Dynamics , 2019, International Journal of Polymer Science.

[38]  R. Zdero,et al.  Impact properties of a new hybrid composite material made from woven carbon fibres plus flax fibres in an epoxy matrix , 2019, Composite Structures.

[39]  C. Ke,et al.  Oxidation effect on the shear strength of graphene on aluminum and titanium surfaces , 2018, Physical Review B.

[40]  Ahsan Akram,et al.  Carbon nanotubes for enhanced interface of fiber metal laminate , 2018, International Journal of Adhesion and Adhesives.

[41]  Kamran Ghorbani,et al.  Fracture and fatigue behaviour of epoxy nanocomposites containing 1-D and 2-D nanoscale carbon fillers , 2018, Engineering Fracture Mechanics.

[42]  C. Gibson,et al.  Graphene Platelets and Their Polymer Composites: Fabrication, Structure, Properties, and Applications , 2018 .

[43]  J. Tao,et al.  Effect of multi‐walled carbon nanotubes addition on the interfacial property of titanium‐based fiber metal laminates , 2018 .

[44]  G. Chai,et al.  Influence of Fiber Type on The Impact Response of Titanium-based Fiber-metal Laminates , 2018 .

[45]  C. Liu,et al.  Bending failure mechanism and flexural properties of GLARE laminates with different stacking sequences , 2018 .

[46]  T. Mitsuoka,et al.  Wettability of Al2O3 Surface by Organic Molecules: Insights from Molecular Dynamics Simulation. , 2017, The journal of physical chemistry. B.

[47]  J. Bieniaś,et al.  Interlaminar fracture toughness of glass and carbon reinforced multidirectional fiber metal laminates , 2017 .

[48]  F. Jiang,et al.  Fabrication, interfacial characterization and mechanical properties of continuous Al2O3 ceramic fiber reinforced Ti/Al3Ti metal-intermetallic laminated (CCFR-MIL) composite , 2017 .

[49]  C. Liu,et al.  Interlaminar failure behavior of GLARE laminates under short-beam three-point-bending load , 2016 .

[50]  J. Tao,et al.  Reinforcement effects of aluminum–lithium alloy on the mechanical properties of novel fiber metal laminate , 2015 .

[51]  Youhong Tang,et al.  Electrically and thermally conductive elastomer/graphene nanocomposites by solution mixing , 2014 .

[52]  Hsu-Chiang Kuan,et al.  A novel approach to electrically and thermally conductive elastomers using graphene , 2013 .

[53]  V. Antipov.  Efficient aluminum-lithium alloys 1441 and layered hybrid composites based on it , 2012, Metallurgist.

[54]  Lee Luong,et al.  A Facile Approach to Chemically Modified Graphene and its Polymer Nanocomposites , 2012 .

[55]  Onur Çoban,et al.  A review: Fibre metal laminates, background, bonding types and applied test methods , 2011 .

[56]  O. Blajiev,et al.  Interaction of anhydride and carboxylic acid compounds with aluminum oxide surfaces studied using infrared reflection absorption spectroscopy. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[57]  H. Sun,et al.  COMPASS: An ab Initio Force-Field Optimized for Condensed-Phase ApplicationsOverview with Details on Alkane and Benzene Compounds , 1998 .