Evaluation of rock strength criteria for wellbore stability analysis

Abstract Polyaxial strength test data of five rocks are used to examine the Mohr–Coulomb, Drucker–Prager, modified Lade, Mogi–Coulomb and three-dimensional (3D) Hoek–Brown criteria regarding their ability, with parameters determined based on the triaxial compression test data, to represent the rock behavior under polyaxial stress states. Then the five strength criteria, with parameters determined based on the triaxial compression test data, are used to analyze wellbore stability of both vertical and inclined boreholes. The results show that the Mohr–Coulomb criterion under-predicts the polyaxial strength and estimates the highest minimum mud pressure required for wellbore stability while the Drucker–Prager criterion over-predicts the polyaxial strength and estimates the lowest minimum mud pressure. The modified Lade, Mogi–Coulomb and 3D Hoek–Brown criteria, with parameters based on triaxial test data, can either over-predict or under-predict the polyaxial strength. The over-prediction of the modified Lade criterion can be very large, and thus it may be unsafe to use it to estimate the minimum mud pressure. Both the over-prediction and under-prediction are relatively small for the 3D Hoek–Brown and Mogi–Coulomb criteria. Therefore, the 3D Hoek–Brown and Mogi–Coulomb criteria are recommended for wellbore stability analysis.

[1]  James E. Russell,et al.  Quantifying the Effect of Rock Strength Criteria on Minimum Drilling Mud Weight Prediction using Polyaxial Rock Strength Test Data , 2006 .

[2]  Evert Hoek,et al.  Practical estimates of rock mass strength , 1997 .

[3]  John A. Hudson,et al.  A Simplified Three Dimensional Hoek-Brown Yield Criterion , 1988 .

[4]  E. Hoek,et al.  Estimating the geotechnical properties of heterogeneous rock masses such as flysch , 2001 .

[5]  S. D. Priest,et al.  Determination of Shear Strength and Three-dimensional Yield Strength for the Hoek-Brown Criterion , 2005 .

[6]  J. M. Duncan,et al.  Elastoplastic Stress-Strain Theory for Cohesionless Soil , 1975 .

[7]  Mark D. Zoback,et al.  Estimation of maximum horizontal principal stress magnitude from stress-induced well bore breakouts in the Cajon Pass Scientific Research borehole , 1992 .

[8]  Lianyang Zhang,et al.  Stability analysis of vertical boreholes using a three-dimensional hoek-brown strength criterion , 2010 .

[9]  Robert W. Zimmerman,et al.  Stability analysis of vertical boreholes using the Mogi–Coulomb failure criterion , 2006 .

[10]  H. Koide,et al.  Effect of the Intermediate Principal Stress On Strength And Deformation Behavior of Sedimentary Rocks At the Depth Shallower Than 2000 M , 1989 .

[11]  Wai-Fah Chen,et al.  Nonlinear analysis in soil mechanics : theory and implementation , 1990 .

[12]  W. B. Bradley.  Failure of Inclined Boreholes , 1979 .

[13]  Robert W. Zimmerman,et al.  Relation between the Mogi and the Coulomb failure criteria , 2005 .

[14]  Hehua Zhu,et al.  Three-Dimensional Hoek-Brown Strength Criterion for Rocks , 2007 .

[15]  G. A. Wiebols,et al.  An energy criterion for the strength of rock in polyaxial compression , 1968 .

[16]  D. C. Drucker,et al.  Soil mechanics and plastic analysis or limit design , 1952 .

[17]  E. T. Brown,et al.  EMPIRICAL STRENGTH CRITERION FOR ROCK MASSES , 1980 .

[18]  M. A. Addis,et al.  Wellbore Stability: The Effect of Strength Criteria on Mud Weight Recommendations , 1990 .

[19]  Evert Hoek,et al.  HOEK-BROWN FAILURE CRITERION - 2002 EDITION , 2002 .

[20]  Bezalel C. Haimson,et al.  A new true triaxial cell for testing mechanical properties of rock, and its use to determine rock strength and deformability of Westerly granite , 2000 .

[21]  Bernt S. Aadnøy,et al.  STABILITY OF HIGHLY INCLINED BOREHOLES. , 1987 .

[22]  Russell T. Ewy,et al.  WELLBORE-STABILITY PREDICTIONS BY USE OF A MODIFIED LADE CRITERION , 1999 .

[23]  John A. Hudson,et al.  Comprehensive rock engineering , 1993 .

[24]  Shaohua Zhou,et al.  A program to model the initial shape and extent of borehole breakout , 1994 .

[25]  Bezalel C. Haimson,et al.  True triaxial strength and deformability of the German Continental Deep Drilling Program (KTB) deep hole amphibolite , 2000 .

[26]  Bezalel C. Haimson,et al.  Polyaxial strength criteria and their use in estimating in situ stress magnitudes from borehole breakout dimensions , 1997 .

[27]  Mark D. Zoback,et al.  A statistical evaluation of intact rock failure criteria constrained by polyaxial test data for five different rocks , 2002 .

[28]  Kiyoo Mogi,et al.  Fracture and flow of rocks under high triaxial compression , 1971 .